I'm trying to add a script to toolbar button from the server. The macro I'using is
^C^CSCRIPT;"//server/path1/subpath1/HVAC-DUCTS.SCR";
The message I take from autocad is "CANT FIND FILE"
I made a toolbar button with the macros @, and tried also @ pause.
I need this in order to shorten the procedure for relative coordinate input, but, after pressing the button the last point is entered and i cannot continue entering values like in the manual input at the command like, like: @5,5
Even if i use the "@ pause " sequence it doesn't work.
How to wait for user input?
I've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
when I hover the cursor over my own custom toolbar buttons, I get the message "Press F1 for more help" you can then go to F1 but that only for Autocad commands not my own programs. My question is how can I get rid of the message "Press F1 for more help" when the cursor is over my custom program buttons?
View 6 Replies View RelatedI am trying to add a button to the Quick Access Toolbar in Inventor 2013 Professional. The button shows up, but it is always at the end of the toolbar. I want it to appear befor the Open button.
Here is what I am doing:
CommandControls AssemblyQATControls = oAssemblyRibbon.QuickAccessControls;CommandControls PartQATControls = oPartRibbon.QuickAccessControls; // Add Mybutton to Quick Access Toolbars.AssemblyQATControls.AddButton(Mybutton, false, true, "Open", true);PartQATControls.AddButton(Mybutton, false, true, "Open", true);
I have a custom toolbar that I've used for years in an olderversion of CAD. Now I'm in 2012 and loaded my custom toolbar in from my previous CUI. Naturally it dropped in all question marks even though I have all paths in the support file added. I even copied all my bitmaps to autodesk's default bitmap location. Neither work.
So after that I went into the CUI and manually selected the bitmap image for "small image" and "large image". It shows in the CUI now, but no luck on the main board. (also, not that this matters, must be a glitch but it won't even show in the CUI until i manually select another bitmap and reselect my origional desired image)
So then I tried taking the whole path and copying it into the CUI manually but it goes right back to defaulting to (MYIMAGENAME.BMP) without keeping the extension. My other custom toolbars loaded with all the pictures but this one just refuses to cooperate.
I also note I could use excel but I have this thing where id like to have the lisp and AutoCAD run independent from other external programs.
I’m the CAD monkey at work and I’m given unbelievable autonomy to what I build (sometimes I confuse work with hobby) put all to one side. My functions often require toolbars with several buttons on them what I would like for one toolbar in particular is to make a most used function button. Better said a button at the beginning of my toolbar, which execute the most used button from within that entire toolbar.
The ideas so far is to add a write-line (append) function lisp for every button this would intern write a button codename/ reference example SNP for snap and SAV for save and so on. All easy I can do this.
What I’m having difficulty with is actually counting the instances of the most used button using lisp. At the moment I’m resorting to a vb.net program, which needs to be shelled first, to recalculate the whole list it works but is messy and quite patch worked. The highest instance would then be used to set a variable, which would be used as the command in the so-called “top 1 tool button”
I need to load a lisp routine by way of a toobar button. I do not want to use the appload dialog box.
View 9 Replies View RelatedI'd like to make a button for the toolbar or the tool palette that will print consistently every time I use it.
For an example, I want to click this button that has the parameters for ADOBE PDF, 11x17, Lanscape, a certain Plot style table, etc......
I want to make a button for each print setting I use.
HOW...HOW can this be done? my inquiring mind wants to know!!
Having this little button will just me me that much more proficient, and ever bit of time certainly counts when under pressure to get out some drawings.
how can I determine which button on a flyout toolbar is currently shown?
View 3 Replies View RelatedIs it possible to position a button on the Open dropdown of the Quick Access Toolbar?
The following works:
CommandControls AssemblyQATControls = oAssemblyRibbon.QuickAccessControls;CommandControls PartQATControls = oPartRibbon.QuickAccessControls;CommandControls ZeroQATControls = oZeroDocRibbon.QuickAccessControls; AssemblyQATControls.AddButton(MyButton, true, true, "AppFileNewCmd");PartQATControls.AddButton(MyButton, true, true, "AppFileNewCmd");ZeroQATControls.AddButton(MyButton, true, true, "AppFileNewCmd");
but not this:
ZeroQATControls.AddButton(MyButton, true, true, "NewFileTemplate4");
I'm trying to create a macro for a toolbar button to open a third party program. Basically we want to open a custom .exe application from a button on the ACAD toolbar.
View 5 Replies View RelatedWe installed autocad 2013 network license on server and able to access from client machine. However, we are unable to access license from server itself.
It is virtual server with windows 2008.
I want to add the following script : Populate Terrain script onto my custom toolbar but I am unable to do so.
I have attached the screenshots of the steps I have to take every time I want to use it. I am using Max 2012 64Bit version
[URL]
I know that the shortcut keys to insert an in-point and out-point are Alt+[ and Alt+] - but is there actually a button to add these points in Adobe After Effects CS6? I'm terrible at remembering shortcut keys and can't believe that it doesn't appear at least somewhere on the toolbar?
View 3 Replies View RelatedHave only recently purchased and installed X5. I am coming from PSPv9 (and doing so reluctantly.)
I am attempting to duplicate the tool toolbar that I am use to in PSPv9 in X5. I have been successful except for one group. In PSPv9, the Dropper tool and the Color Replacer tool are in the same group. I have been able to create a new Button Group and place both tools into it. What I can not figure out is how to have the new button group display an icon. All other groups display the icon of the first tool in the group listing.
And in the 157 page Macro PDF (really, did it need to be this long? How about an easy-command sheet), it says you can use the key command Ctrl+Shift+R to start recording... Well, that brings up the ruler.
I use Macros a lot in Excel (I record the commands that I want, then tweak in the editor), so I get how they are supposed to work - but I'm no programmer, and without the ability to record, I'm completely handcuffed. This really shouldn't be 1% as difficult as it has been
I have seen a reference to the auto close gaps button on the toolbar of CorelDraw.I need something like that, because whatever I do I cannot fill my lineart with the smartfill tool, even though I have closed all the gaps, as far as i can tell.
I am wondering if there is a problem with my Coreldraw X5 Software.I am using it on an iMac with Parallels.
i'm running Elements 8 on an Apple Mac running OS X 10.9.1
I'm unable to find any button on the toolbar to open Organiser. So how do I access it?
Is there any way to set keyboard shortcut or toolbar button to customized find objects option (.fin file)? I am a average Coreldraw user, knows almost all basics, but lacks advanced use of Coreldraw. I like to use any techniques that saves time. I know it with adobe Photoshop (like action etc.) but not with Coreldraw.. I heard about macros.
For Now I need to
1) set keyboard shortcut or toolbar button to customized find objects option (.fin file)
2) set keyboard shortcut or toolbar button or macros for repetitive find & replace options...
3) create macros for simple moves & then after combine these type of simple macros in one macros...
4) set keyboard shortcut or toolbar button to that macros...
5) and any these type of time saving technique. (in selection making, replacing, finding, batch process etc..)
I want is make actions & then combine them to script & then set keyboard shortcuts for same...
I have a Sql Server 2008 R2 database with gis features. I can connect to it and add the features to a map when using Map 2012, but not with Map 2013, even with the Sql Server hotfix installed. In 2013 I can log in to sql server and see a grayed out list of the feature classes, but I can't add them to my maps, and I get a message about no spatial data found, (or something to that effect).
View 9 Replies View RelatedAll our DWG files are stored on a network share. Files in that share are indexed by Windows Server 2008 r2, so searching in files from within Windows 7 is quite easy.
Unfortunately, the server doesn't index DWG files - it doesn't have the required filter installed. Now I can add the DWG extension, but it will use a 'Plain text filter' that's unable to look inside the DWG's. It should use the AcDwgFilter.
So: How do I get the server to index DWG's without installing AutoCAD? I.e. how to install the AcDwgFilter on the server.
How can I install 2014 vault basic on my synology NAS Server? I have been told by our IT Guys that it won't be able to handle the vault software. What makes the Synology Server not work with Vault?
View 1 Replies View RelatedI have several groups in our organization which utilize Autocad 2013 products, but each group buys their own licenses and utilizes a network license server.
Can I install each license file into a seperate port on same server to allow each group to use their own pool, essentially to not allow the other groups to have easy access? (We customize the install for each group to a particular lic server/port)
My office uses Dropbox as a server for all of our working files. I can create and work with CAD files (using many x-refs) without a problem. The problem that I have occurs whenever someone else in the office tries to use the CAD file that I created with x-refs OR whenever I use a different computer station (still logged in as myself)...the X-refs are always missing (detached). I can reattach them but this defeats the purpose of using the X-ref. how Dropbox works.
View 5 Replies View RelatedSo we have an HP T1100 plotter and we want all the .pc3 files on the server. I go to the plotter in my devices and printers from the start menu and I add in all my custom paper sizes. Then I create a .pc3 file that points to a system printer on my machine for that plotter. I then move the .pc3 file to the server. Next thing I do is go to .pc3 file on the server and filter out all the unneeded papers sizes (arch, jis, iso, etc.) so all that shows up in the plot dialog box are the custom sizes I created. I then re-path autocad to the server in my options. All is fine so far, everything plots fine.
Now I go to another machine and point autocad to use the folders on the server for the plotters. I go to plot and the .pc3 files are there but when I pick the paper size drop down selection, all the arch, jis, iso sheets, etc... that I filtered out are now there. Well, I can go into the .pc3 file on his machine, re-filter out all those unneeded paper sizes and all is well, but then I come over to my machine and all the unneeded paper sizes are there again. It goes back and forth. I save on one machine and then the other one is messed up.
I cannot get the unfiltered papersizes to stay that way on the .pc3 file thats on the server. Why is this? I know I have the .pc3 file pointed to a system printer on my machine but we have the same printer on each machine with the same drivers. We could just put the plotter on the server so there is no system printer but that is not an option right now.
when I try to use the VIEWBASE command to create views from my 3D solids, I always get the message "inventor server failed to load" and the command stops. I am using AutoCAD 2014 with SP1 installed on windows 8 .
In a similar message in the 2010/2011/2012 discussion group: URL....
it is suggested to reinstall the software, but this is not working for me.I have already tried to 'repair', 'reinstall' and completely remove all the software and then reinstalling it, but nothing seems to fix this problem.
Are there any other programs I need to have installed to get this command to work?
How can I get the upper toolbar back?
View 1 Replies View RelatedI copy a .dwg to my remote computer and open it. Then .dwl and .dwl2 are created in same local folder as the .dwg I just opened localy. Then I copy the local .dwl and .dwl2 files back to the remote server in the same location I received the origional .dwg from. Why are those files not locked now from everybody on the network that I am remotly away from?
View 7 Replies View RelatedRunning 2014 plain Jane. I have the ribbon turned off. Sometimes (a lot) when I double click a block to edit it my Block Editor Toolbar does not come on. And it is not listed in the acad list of tool bars.
View 9 Replies View RelatedSometimes on my "Draw" toolbars, all of my icons disappear! Passing the cursor over it, than they reappear! Made same thing in ACAD 2012.
My video card is a NVIDIA Quadro 600 with the latest driver installed.
Win 7 64
16gb RAM
Xeon 3.07