We export our renders to be used in a GUI and for some reason the bottom of our renders since last week (to be fair we only have one user who exports - so only one user has this problem) have a solid black line on the bottom. Now this wouldn't be a horrible problem except we have to set a transparency color in our control software and since the background is not uniform it is VERY obvious when in our final software package. We also have to maintain a constant resolution or the control systems (what we use the renders in) will distort and be way off.
Here is a sample: [URL]....
This happens in both 2013 and 2012. Perhaps there are some lightning/render settings I can try changing on this users machine?
I am quite new to 3D modeling & rendering. I did a simple 3d model of a standing unit, but once i clicked on render, only a black screen appeared.
I did try to put a point light and increase its intensity but the model can barely be seen. I also created a new camera and clicked render but to no avail.
My AE comp renders as a full-length video of a black screen (with audio, when enabled). Comp plays fine in RAM preview, and I've tried all types of codecs and disabling RAM intensive effects, though I'm working on a quad-core i7 macbook pro with 8 gigs of RAM, so that shouldn't be a problem.
I have been faced with an almost identical problem listed here URL....The only thing that changes it from complete blackness is the "Ambience" value. I've done all software and hardware updates, reinstalled the graphics card driver, and restarted a multitude of times. I am using:
Dell Optiplex 390 Intel(R) HD Graphics 2000 Windows 7 64 bit Photoshop CC No Color Management No plug-ins, or anything other than default PS settings
I used Lighting Effects on Photoshop CS3 and CS6 for almost two years on this machine with no problem. This was the first time I had tried to use it since I upgraded to CC. I uninstalled all other versions of PS when I upgraded, so I have not tried to replicate the problem in older versions.
why when i use the little window in the exposure control to render a preview so i can adjust the exposure. but does not matter what i do, it just stays black. i am not doing anything different than before so i am assuming a toggle switched on me and now nothing. it renders just fine, preview is just broken or disabled.
I've just discovered my Command Line Box at the bottom of the screen is missing in action...not sure what I did to loose it. Any COMMAND to get it back?
how to make a circle split in half with the top half black and the bottom white. I've made a circle with a 37 pt black stroke, now I just need to make half of it white.
I'm trying to create a feature line to use as a breaklline for the bottom of a ditch. I click on the first contour, elev.678, accept the elevation, click the next contour, select T for transition, then accept the elevation, 677. I would like to end up with a feature line having a first node elev. 678, end node elev. 677, slope -4% (contours are 25' apart). Instead, The first node is 678, slopes @ -1.33% to an inserted node, elev. 677.1, then slopes at -21.88% to end node elev. 677. What am I doing wrong? I don't see a lot of options here when creating (drawing) a feature line. Should I be using something else to accomplish this task?
We have a title block wherein the Location attribute is normally a single line, but occasionally is two or more lines. Within the title block this attribute is surrounded by lines, left, right, top, bottom.
We would like the bottom line to move down when the user adds additional lines to the attribute.
Having issues with 2013, somehow switching to bottom view. Open a drawing and everything looks normal except when I look at the viewcube and I am looking up from the bottom.
Civil3D 2013 Windows 7, 64 bit Intel i7 2600 @ 3.40Ghz 16 GB RAM Nvidia Quadro 600
We've carried out a company upgrade of AutoCad to 2014. Since then a fair few PC's display an odd behavior of rapidly flashing bottom toolbars when more than one drawing is open at a time. One PC resolved this by upgrading their video driver.
I feel as though there is a shortcut for this problem. In this simple 3D model, I need to "cut" out the excess volume from the bottom of my 3D model. The thickness at all walls needs to be 1mm. Is there a simple solution to "vaccum" the extra space out from the bottom? The top shows the compartments.. but the problem is the excess space underneath.
Is it me or is leading only affecting the bottom line/sentence of the line HIGHLIGHTED in CC?
Before, if I wanted to set the leading, I would highlight the line I want to affect and set it...that selected sentence would be the one to shift up or down. Now, the leading affects the sentence BELOW the sentence I highlighted.
According to a few tutorials I have read, the Units Menu should appear on the bottom line, alongside the Status and the Pointer Coordinates and Zoom Button. None of these items appear, and I have searched far and wide, but can't find out where to enable them. The only thing that appears on that line is "Background (2.7 MB)".
I have a series of sheets, each with two viewports to show two plan views of a long road alignment. I arranged them to read bottom to top, as it goes up stationing, as we do with cross section sheets, but have been told by an outside reviewer that the sheets are confusing and should read top down.
I need to start doing shaped glass drawings for our new glass supplier who insists everything is viewed from outside. Unfortunately all our drawings are viewed from inside and I don't want my team to be responsible for copying and flipping glass details in case they forget to flip one day.
I can obviously mirror the viewport view by clicking View/Views/Bottom but this is also mirroring any text dimensions, even though my Mirrtext preference is set to 0.
Is there a way to set a dimension style where the text is automatically back to front so it will then appear the right way round in that particular viewport. How to get round this problem without duplicating parts that can then get missed at a later date and not amended?
This needs to work in both AutoCAD 2014 and AutoCAD LT 2014 as we run a mixture in our office.
how to get this problem resolved. everytime i use my type, when i click on my work area, a black dot appears on page before i begin to type. then no matter what font i use, there is a black line under all my type. how can i get just the black dot from appearing at first when i click, and that annoying line under all my type to dissappear! i'm veryy new to photoshop, and i have cs.
Using illustrator CC, I want to curve the bottom line of my text upwards, but not have the top or sides move at all. Imagine of the text was something squishy, and I pushed it down onto the top of an arc. I've only been working with Adobe CC for about a week now. I've seen lots of examples of having the text follow a curved path, but they all curve the entire thing, whereas I only want the bottom of the text to curve.
I have a weird problem when printing from Illustrator CS4, i get a symmetric linie at the bottom of the page in the same color as the star i am printing, and the color of the line changes when i change the color of the star ?
How do I control which colors appear in the color line that scroll across the bottom of the window. The only colors that currently appear are shades of reds/purples and yellows/greens. If I scroll across from left to right the same colors just keep repeating themselves. There are no shades of gray or blue. Can I somehow preset the colors that appear or do I have no control over what colors scroll across the bottom.
I am desperately looking for the function in Coreldraw that allows me to cut one object based on the intersection of another object. Essentially I am looking for the "Trim" function that exists in Autocad.
Example... draw a circle...then draw a line that crosses the center of the circle. I want to be able to remove the bottom half of the circle below the intersection line.
draw and long narrow ellipse...then draw a circle on top of the ellipse I want to remove the ends of the ellipse outside circle..In autocad this takes exactly 3 keystrokes and less than 2 seconds...I have tried everything in Coreldraw and cannot find away to make this happen...
For example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
I was drawing a lot of lines with the pointer that stuck at the end of the line and after that it stuck at the beginning of the other line (i hope you understand what i mean). I don't know what i pressed but now this function is not active and is very difficult to draw the lines.
Is there an obvious reason why a polyline would plot grey instead of black? If I select a monochrome plot style table, the lines are black. I noticed certain fonts will plot grey instead of black, but I am stumped on an object.
