AutoCAD 2010 :: Blank Display When Opening Drawing
Jun 21, 2012
On the average 1 out of 10 drawings will open up with a blank display. By clicking randomley on the screen until a line is high lighted and using the re command the drawing will appear. This has started happening after switching to Win 7pro 64 bit and Autocad 64 bit. This happens on various machines in the office, and on differant files made by differant computers.
Display is set to black. Layout is set to white.
I have tried various display drivers, the ones from the mfg, and the ones that have been tuned for S W. no effect same problem.
View 4 Replies
ADVERTISEMENT
Sep 11, 2012
My Autocad has started a new behavior. When (in Win7) I double-click on a drawing file in Windows Explorer, Autocad opens the drawing file and also starts a new drawing, all in the same session of Autocad. Is there some system variable or Windows variable that controls this?
View 1 Replies
View Related
Apr 18, 2012
I have a problem in polyline width. when i set polyline width in one drawing shows solid line & in another drawing shows blank lines.
View 9 Replies
View Related
May 9, 2012
I'm looking for a field or maybe piece of rtext that can display any pdf's that are showing in a drawing, I've had no luck in finding anything that can do it.
View 4 Replies
View Related
Jul 23, 2012
We are running LT 2010. I have one drawing that crashes Autocad while the drawing is trying to open. The drawing is about 13 Meg. The crash occurs when it gets to the regen step. The program does not continue and it is necessary to go to the Task Manager. Autocad shows as not responding. Performance shows 50 - 100% CPU usage. The task must be ended. CPU usage drops to < 10%. The recovery utilities say that everything is OK and make no difference. It is doing the same thing on another PC. About 10 Meg of the file is one block. I can open that block separately without a problem.
View 2 Replies
View Related
Feb 6, 2013
Every few weeks when opening a drawing, my computer restarts (just plain crashes windows and it restarts automatically). This only happens using AutoCAD, no other program has done this as of yet. I have no service packs installed and I haven't seen another post that refers to this problem. When I click on "Check for solution", nothing comes up.
View 8 Replies
View Related
Sep 21, 2012
I had an issue using 3D 2010. In my drawing I had a layer for my windows. My windows were nicely put together and design on the window layer. Next thing that happens I turn on my drawing today to come and find my windows are now saved on my viewport layer and the viewport layer took the properties of my window layer. Now last night when I plotted out the drawing I made viewports on a layer for viewports and that was the last layer I had used so it was current. What I want to know is why the hell did the layer dominate my window layer with taking the properties of my window layer. I did not merge them!
View 3 Replies
View Related
Oct 14, 2013
I recently upgraded from map 2008 to civil 3d 2010. Whenever I open a drawing that was last saved/used in my map 2008 program, it freezes upon opening and tells me there are errors. If I ignore the problem, I can continue to open and work on drawing, but every time I open it up, I get the errors and the freeze. Is there something I can do in civil 3d 2010 that will bypass whatever is freezing it up? I have included a drawing that is freezing up in civil 3d 2009 and/or 2010 that was created with map 08
View 4 Replies
View Related
Nov 15, 2012
Working in AutoCAD LT 2010.
Drawing format 2007 or 2010
bedit, OK if you regenall after
refedit, Ok if you regenall ofter
design Center - display order goes out the window. The inserted block is redefined but the rest of the drawing loses all its display order. sortents (127, 33, 51, etc) and displayorderctl does nothing, either before or after the block is redefined. hatches and blocks just jump to the front (display order shows as order of drawn not order as moved to) Regenall does nothing.
absolute nightmare with display order managed elevations (solid hatch, baconies, windows, multple buildings, all overlaying!!)
View 4 Replies
View Related
Feb 16, 2012
I have a project with a sheet set (both created in C3D 2012) that was working fine up until a couple of days ago. Now, when I open the sheet set, there is nothing there. And any sheet set I open is blank.
Civil 3D 2012 (current SPs) 64x
Windows 7 Ultimate 64x
8GB RAM
Civil 3D 2012
Win 7 Ultimate x64
Intel Core 2 3.2Ghz - 12MB RAM
Nvidia 8500GT Dual DVI
View 3 Replies
View Related
Sep 7, 2011
NOTE: This is in AutoCAD 2002.
I'm working on one of our standard layouts for a client. Our typical drawing setup is the base drawing file, surrounded by our Xref'ed border. On said border Xref, we have all the information that does not change between drawings (Revision history, address of job site, etc). The only things that change - and, thus, are not on the xref - are the title of each individual sheet and their number; in the case of these objects, they are located on the drawing file itself in the appropriate position. They are, however, the same font as the text in the Xref - "Standard". Or, at least, they're supposed to be.
The text in the base drawing file seems to be a different version of the text from the Xref - a much blockier, sharper-edged version than the Xref text. My first response was "Okay - I'll just copy/paste the text from the border into my base drawing file, and force the existing text to match the properties of the imported text."
This, however, did not work. The imported text automatically assumed the same form as the existing text. Here's a screenshot from the base drawing, illustrating this (The "Mechanical Plan" also exists on the base drawing, and not the Xref):
I copied the existing text from the base drawing (In this case, the "Mechanical Plan") and pasted it directly into the Xref itself, to see what would happen. Apparently, it wants to stay blocky:
In the latter example, I even tried to force the blocky text to assume the properties of the smooth text via MA (Match properties). I specifically need to make the text in the base drawing conform to the style that the text is assuming in the Xref - which is to say "Smooth."
View 0 Replies
View Related
Jan 23, 2013
After closing and reopening my command prompt, I find that it is now at the bottom left of the screen and no longer part of the main graphics window. How can I get it to display at the bottom of the main display?
View 9 Replies
View Related
May 10, 2012
When I open an image, sometimes one or more of the "panes" or "panels" does not display, i.e. there is the blank checkered screen in that section of the image. If I zoom in or out, all the image will display, until I get back to that magnification and again there are one or more blank spaces. If I close and re-open the image, it usually, but not always, displays fine.
Sometimes I need to close and open twice. I would say this has happened about one out of ten times I opened an image so far in the two days I have been using the program.My first thought was to update my video display driver, but I already have the latest one (using Nvidia Geforce GT220).
View 6 Replies
View Related
Aug 15, 2013
We have imported a .dwg file from our engineer into CorelDraw 5 under Windows Vista (64-bit). The file appears to import all elements since the layers and objects all appear in the 'Object Manager' docker. We can also select ALL objects and a rectangular marquee or extent shows up on the screen, which is presumably the bounding box for the imported drawing. Unfortunately, there is nothing displayed there (no topo, no streets, no buildings, not anything). We even tried selecting all objects and changing the color to black, but there are so many elements it appears the system will never stop processing or is locked up.
Why our imported .DWG file appears to be there, but displays nothing?
There was a small dot on our screen near the side of the page, just a small spec on the monitor. When we selected the dot and resized it to a full page, there was our complete drawing. However, we do not know why the drawing was imported as just a spec, nor why we had a larger edit marquee that appeared as wide as the page, yet appeared blank.
View 3 Replies
View Related
Aug 29, 2013
I've been using Illustrator for a few year now, but I've never had this problem before. Recently, I went to open up some files I had been working on. The problem was, when they opened, the files were blank. There was nothing on them.
When I open pdf and eps files, they're fine, it's just ai files that open up blank.
I ran a quick test where I created a new file and saved both as an ai and eps file. I closed it and quit Illustrator. I then re strated the program and opened the test file, and lo and behold, the ai file opened up blank, but the eps file was fine.
I'm on Mac OS X, running Illustrator CS6
View 7 Replies
View Related
Sep 7, 2012
I just installed CS6 and tried opening CS5 psd files but they appear blank even though I can see the images in the layer thumb nails. Is there something that could be hiding the layers?I meet thewindows system requirements but my memory usage is almost at 4GB just having photoshop open.
View 8 Replies
View Related
Aug 25, 2013
When opening a photo in CS-5, all I get is a blank layer. Navigator shows the photo that I opened.
View 1 Replies
View Related
Jul 25, 2006
When I open a photo using photoshop, instead of opening up the actual image, it turns up a blank document? What to do? Some images open up but others don't.
View 9 Replies
View Related
Jun 14, 2012
I have a customer that sent me some Illustrator files (.ai) that, when I open them, they open with just a blank window and a box with no fill or stroke around the outside of the document. I am using Illustrator CS4 and I suspect this may be an Illustrator CS6 document but I didn't get any warnings when I opened it so I'm not sure. (I also don't know what version of Illustrator the original creator is using). The document sizes are large (35MB +) so there should be SOME content in them. I've tried making sure nothing is hidden and there are no layers that are turned off. I've also tried opening the files in Acrobat CS4 with no luck.
View 8 Replies
View Related
Apr 30, 2012
When I try to open an X5 template in X6, nothing happens in X6. I don't receive any error messages. It looks like the template is opening, but I just end up with a blank grey (no file opened) slate. I am using the 32-bit build. Everything else seems fine.
View 1 Replies
View Related
Aug 23, 2012
Blank/Black Screen when opening some CorelDraw files.
I have several hundred CorelDraw files with various images and design that I use for printing for our business.
Recently I have opened files to discover either blank or black screen in the CorelDraw file. I can use Object Manager to see that the image and text are still present, but I cannot view it. I can also export the image to a PDF even though I cannot view it. Other files open without any issue. One file opened fine and then when I went to cut an image the file turned black and is now in the same condition as other files with the problem.
Using CorelDraw X4.
View 2 Replies
View Related
Apr 28, 2006
MOST of my mov. files are opening in imageready as a "BLANK WHITE" movies with sound, but some are opening normal.
View 6 Replies
View Related
Nov 25, 2013
I'm trying to work on a project I created a few months ago in Edge. However, when I try to open it in Edge Animate CC, it just displays a blank screen (See image).
The timeline, the canvas, the properties, nothing seems to be populated. If I drag the time line back to 0:00, an alert pops up saying "An error occured. Please save your work and restart Edge Animate." The exported HTML file still seems to work fine though. I've tried uninstalling and reinstalling Edge, but that hasn't seemed to work.
EDIT: This seems to be an intermittant problem. Sometimes, the file displays correctly, sometimes it doesn't. If I close the program and open it again, the issue re-occurs.
View 28 Replies
View Related
Dec 10, 2013
I can edit a video, with resynced sound/dialogue in premiere cc. When I save and close the project, everything is okay. When I later reopen the project all or most of the audio tracks are blank. They are there with the right name and length, but no waveform and no sound. I have put them in manually resynced and then on save and close: again they are gone. So there really is no point in editing if I can`t save the result. How can i restore my edits and also why do I have to do so? I have now redone every scene 5 times and I need a solution asap. Autosave keeps the same useless projects.
on Mac Pro, 10Gb Ram, premiere cc.
I tried the pluraleyes extension (as I was using pluraleyes) but this makes no difference.
View 5 Replies
View Related
Feb 1, 2012
I have AutoCAD 2012 and when printing to PDF on this drawing only it’s coming out blank (nothing in the PDF). All my other drawings work fine.
The plot preview seems to be fine also as I can see the drawing OK. Also It takes a lot longer to print on this drawing. It seems to hang around for about 30 secs and then produces a blank PDF.
I noticed a plot style pen missing which may cause the problem?
View 9 Replies
View Related
Jun 27, 2013
Have some pics in X4 on Windows 7 but same are not opening in X 12/ Windows 8.
When copied from X4/Windows7 and pasted in X12/Windows 8, icon showing blank and on opening a blank document opens.
View 1 Replies
View Related
Nov 28, 2012
Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies
View Related
Mar 23, 2013
I have two drawings A and B. I work in A and I need some design elements from B.
When I open the drawing B everything I have in drawing A disappeared. I refer to all elements of design (blocks, lines, polylines, etc.).
After studying the issue have concluded that the design of all elements were automatically isolated. Right click> Isolate> End Object Isolation and everything reappears in drawing A.
I mention that I installed Autocad Map 3D 2012 x64 on Windows 7 x64 and work in Map Classic Workspace using the same coordinate system in both drawings.
View 4 Replies
View Related
Nov 16, 2011
When I open an drawing, AutoCAD opens *two* drawings, the one I wanted *plus* a new one (called drawing 1.)Why does this happen and can it be prevented?
View 6 Replies
View Related
Jun 9, 2009
I am finding the layer combo control in 2010 an annoyance. The drop down box does not access as many layers as did the version in 2009, and I find myself continually searching through the drop down box to reference a particular layer. How to rectify to have it similar to 2009?
View 9 Replies
View Related
Jun 15, 2011
I am running CAD Map 3D 2011 and a Windows XP SP3 machine with 4GB RAM and a 128 MB 3D card. I am trying to send the plot to a HP Designjet 800PS plotter.
The file that I am working on is not overly large and has no raster images or OLE objects attached. It does have several open database connections that I am using to theme one of my drawing layers. The sheet itself is an odd size (36" x 54"), but I have printed other drawings of this size before and I've never had problems.
When I first plotted the sheet, it was taking forever to spool, so I ended up canceling the print several times. I finally decided to try to plot to PDF, but this created a HUGE spool file (2.65 GB). Since it was actually spooling, I went ahead and let it run. It ended up taking about an hour to spool and print the PDF. Before I opened the PDF, I checked the size and found it to be about 12 Mb. When I opened it, all that was there was a blank sheet. After that, I re-sent the plot to the HP plotter and just let it work overnight. When I got in this morning, there was a 36" x 54" blank sheet waiting for me.
I've checked the basic settings and none of the layers are frozen, off, or set to not print. I also increased by page file size to work with the plot, but that does not seem to have had any effect. I've tried creating several different .pc3 files, but the issue has stayed. I am now trying to have another person open the file and print it from a different workstation, but so far no luck.
As a side note, I tried a work around by plotting to a dwf file using the included dwf driver. This spooled and plotted very quickly (<60 seconds) and the dwf file appears just fine in design review. However, when I try to print from design review, it won't let me set it as a 36" x 54" plot; it keeps with with the standard print sizes only.
View 1 Replies
View Related
