CorelDRAW X5 :: Blank Display For Imported DWG File
Aug 15, 2013
We have imported a .dwg file from our engineer into CorelDraw 5 under Windows Vista (64-bit). The file appears to import all elements since the layers and objects all appear in the 'Object Manager' docker. We can also select ALL objects and a rectangular marquee or extent shows up on the screen, which is presumably the bounding box for the imported drawing. Unfortunately, there is nothing displayed there (no topo, no streets, no buildings, not anything). We even tried selecting all objects and changing the color to black, but there are so many elements it appears the system will never stop processing or is locked up.
Why our imported .DWG file appears to be there, but displays nothing?
There was a small dot on our screen near the side of the page, just a small spec on the monitor. When we selected the dot and resized it to a full page, there was our complete drawing. However, we do not know why the drawing was imported as just a spec, nor why we had a larger edit marquee that appeared as wide as the page, yet appeared blank.
View 3 Replies
ADVERTISEMENT
Dec 7, 2013
Now i have a blank file/document every time i export to .ai format... i use only CorelDRAW X6 (64bit) with update 16.4.0.1280
I know it when my client complaint, the ai file i give is Blank ? just a blank on that file.i have check my last other file on ai format, the ai file is fine, not a blank like now.i was try to uninstall and install again CorelDRAW, but it didn't work yet.
And i format my windows 7, install again CorelDRAW, but still like that. What should i do to make a normal export to .ai again ?????
View 4 Replies
View Related
Mar 30, 2011
I have a CDR file I've been working on for about a week, and it suddenly started opening as a blank page. I have attached it here. how to get some or all of the material back, and why this happened so I do not encounter this again? File is available here: URL....
View 14 Replies
View Related
May 2, 2012
I'm trying to upload an AVI file to make a GIF, but whenever I go to File-Import-Video Frames to Layers all of my layers are blank. When I tried to play the click in QuickTime it told me to download an extension or something. I downloaded Xvid, but still it's not working.
View 4 Replies
View Related
Oct 20, 2011
When I try and publish a image or document to PDF it produces a blank PDF document.
I have tried using Bullzip PDF printer but that also produced a blank PDF.
View 4 Replies
View Related
Sep 7, 2013
Some of my imported photos are showing blank in preview mode before I import, reading Preveiw unavailable for this file. Does this mean when I import they wont be imported.
View 1 Replies
View Related
Sep 28, 2012
I'm using Lightroom 4..i've been importing my RAW images from my external harddrive. Some show up in the catalog as ruined with a blank white section and color bands. I've checked the actual image on the external hard drive and it is fine. I've deleted the ruined files from the LR catalog, then re-imported those problem ones... still come in as white with banding. I've even tried deleting them from the catalog, then from the hard drive... then back onto the HD from the camera, then back into lightroom. Some look ok until I look at then in loupe view and the same problem happens. Mean while the images on the HD and on the camera's CF card are fine.
View 5 Replies
View Related
Feb 2, 2011
The imported file is probably from Illustrator. The vector element in question is text converted to curves with a CMYK bit map fill. CorelDraw X5 seems unable to extract the bitmap fill from the vectors. What's up with this, is there anyway to extract the bitmap fill?
View 3 Replies
View Related
Jun 25, 2012
I can not make a lightweight Pdf file.
I want to make a document for display only.
What are your options for this type of work with DRAW X6.
View 3 Replies
View Related
May 10, 2012
When I open an image, sometimes one or more of the "panes" or "panels" does not display, i.e. there is the blank checkered screen in that section of the image. If I zoom in or out, all the image will display, until I get back to that magnification and again there are one or more blank spaces. If I close and re-open the image, it usually, but not always, displays fine.
Sometimes I need to close and open twice. I would say this has happened about one out of ten times I opened an image so far in the two days I have been using the program.My first thought was to update my video display driver, but I already have the latest one (using Nvidia Geforce GT220).
View 6 Replies
View Related
Jun 21, 2012
On the average 1 out of 10 drawings will open up with a blank display. By clicking randomley on the screen until a line is high lighted and using the re command the drawing will appear. This has started happening after switching to Win 7pro 64 bit and Autocad 64 bit. This happens on various machines in the office, and on differant files made by differant computers.
Display is set to black. Layout is set to white.
I have tried various display drivers, the ones from the mfg, and the ones that have been tuned for S W. no effect same problem.
View 4 Replies
View Related
Dec 12, 2011
I'm using the trial version of X5 and have noticed that the number of characters that display the file name at the top has been shortened since X3. In some cases I'm not able to even see any of my file name because I have things saved in many subfolders for organizational purposes. It appears that it is limited to about 120 characters, which sounds like a lot, but when using dropbox and other subfolders, can fill up quickly. When I open the same exact file in X3, the name is fully displayed. How to change this? Or is this possibly just a trial version thing? .
View 1 Replies
View Related
Jul 18, 2012
I'm trying to link an Excel sheet to a new assembly but it is only listing half of the sheet parameters. I have done this before with no issues. I've also imported another sheet and it works fine. I copied and renamed a sheet I know that works deleting the data from it and coping the data I want and I get the same results. This lead me to believe there is something wrong with the sheet. See attached file.
Excel 2010
Windows 7
Inventor 2012 64 bit
View 3 Replies
View Related
Oct 24, 2011
I am working in CorelDraw X3 and when I publish to PDF they are coming out blank? I have made many before and they are fine, I know to position it in the page, but still nothing? I am using Windows 7? By doing it through the 'prepare to bureau service' they work fine except the file size is massive?
View 3 Replies
View Related
Apr 17, 2013
Since installing version 16.3.0.1114, I have a new problem. Every time I edit a body of text (Ctrl-T), a new blank line is added at the top of the text.
I hope Corel has been informed of this most annoying problem and will fix it very soon.
View 5 Replies
View Related
Sep 8, 2007
I've been working on a 32 page project for a week now and while working I noticed that the miniature preview was lost and replaced with a "pen" icon. It's usually a sign of something bad and after closing the file I tried to open it again.
Even though windows says the file is 173 MB, the file is blank. Nothing appears in the object manager either. What do I do to reveal the content? I have deadline tomorrow? The backup is corrupt too for some reason. A backup that gets corrupt - whats the use of it?
View 12 Replies
View Related
Apr 17, 2013
It crashes without warning, it just closed... that's all.It happens whenever I try to:- Save (either clicking on the save button or using CTRL+S)- Group (with CTRL+G or by clicking on the Group button after right click), I've tried to remove the "Pattern" and I can group finally, but still closed when I try to save.I try to remove any fillings but still closes when saving (but it didn't got saved at all)I've browsed through the forums and tried everything... nothing works. Even un-install and re-install didn't work.
It even closes when I try to save a blank page (with only an object like rectangle or something on it)
View 4 Replies
View Related
Oct 25, 2012
Just upgraded my X5 to X6. So far so good, except pop up menus are blank. See image below. Am I missing a setting somewhere, or is this a Windows XP Pro problem? I have my screen resolution set to the Corel recommended 1024x768.
View 7 Replies
View Related
Apr 16, 2012
It happens more when i import eps files:
the 'layers only' toggle of the object manager will go blank; the toggle where the master layer and all objects are listed still works, just the layers only listing goes blank. All files opened after the event will do the same, requires a shutting down of CorelDraw and restart to bring things back to normal.
windows 7
View 1 Replies
View Related
Jun 30, 2011
i have been working on this project in corel draw12 for several weeks now, as it is or/was coming to its final stages a few days ago it now only opens a blank page, it is 2.14 gb and it will get bigger as it reaches its final stages.i can still see it in preview. when it was opening it took a very long time to open i realise the reason for this is the size im using very high resolution images and designing and editing, or maybe there is another program that you may recommend that will support the size so i can complete my work.
i found a backup copy but it will not import the size is 1.70 gb seems its still too large to open ,
i don't think it has anything to do with memory , i have a full drive laptop is new. my thoughts are that corel draw will not open a file that size, and you are right about breaking it up i should have worked in several sheets but saved them desperately.
View 9 Replies
View Related
Apr 30, 2012
When I try to open an X5 template in X6, nothing happens in X6. I don't receive any error messages. It looks like the template is opening, but I just end up with a blank grey (no file opened) slate. I am using the 32-bit build. Everything else seems fine.
View 1 Replies
View Related
Jun 15, 2012
Got the "Cannot open a blank document" ERROR Message when I went to open a recently created Corel Draw X5 file. Using Windows 7 Professional.First time I've gotten this message.
View 1 Replies
View Related
Jun 9, 2011
I tried to open file's that I created recently in X3 and they will not open. when i try to open them they appears as blank page and they show nothing
all of my Cdr files be corrupted . they show their real size (eg 23mb ) but when i open them it show white page. Even the tumbnail pic shows only corel draw pencil and when i want open them on corel or import in it This error message appears : D: 01.cdr" is not importable using the selected filter, or this format is not supported
View 5 Replies
View Related
Apr 7, 2012
Using X6 64 bit on Windows Ultimate. Tables appear blank until a manual screen refresh?
View 4 Replies
View Related
Aug 23, 2012
Blank/Black Screen when opening some CorelDraw files.
I have several hundred CorelDraw files with various images and design that I use for printing for our business.
Recently I have opened files to discover either blank or black screen in the CorelDraw file. I can use Object Manager to see that the image and text are still present, but I cannot view it. I can also export the image to a PDF even though I cannot view it. Other files open without any issue. One file opened fine and then when I went to cut an image the file turned black and is now in the same condition as other files with the problem.
Using CorelDraw X4.
View 2 Replies
View Related
Jun 13, 2013
I have been using X3 for years, then decided to upgrade to 4 which I did, however I stopped using X4 as I could not see the Fonts display in the fly out box as they show blank so you can not see what the text would look like say in 'Bold' or 'Italic' or in a different font. I keep trying to sort it then I just go back to X3 but I really want to use X4 (I have X5 which does exactly the same thing.) I have looked at the 'Font settings' in X3 & compared to X4 checked and unchecked boxes, still no different. I did have X4 loaded on another old computer, which I uninstalled, thinking this may be the problem. Didn't change anything, so I have just uninstalled and reinstalled on the computer I am using now but still no good.
My operating system is still windows XP not sure if this is the cause?
View 14 Replies
View Related
Sep 11, 2013
I am using Corel X3...I am trying to create a PDF in Corel X3 but the pdf is coming out blank? On smaller files they work out OK. I have re-sampled the images to make them smaller but it is not working? The file size is 31mb.I have made PDF's before and it is easy, but this is frustrating now. I have even uninstalled Corel and re-installed. Changed PDF generating programs too. I am now using Nitro Reader.
View 4 Replies
View Related
Apr 4, 2011
I was playing around with my settings and did something that is keeping me from printing. When I go to print preview, the page is blank. I have tried opening up jobs that I successfully printed before and they also show and print blank. Everything looks normal in the work area. I just can't print.
View 14 Replies
View Related
Aug 16, 2007
I received a PSD file from a client that I want to pull an image from. When I open the file there is a background layer and Layer 1, but in the layer window they're both blank. However, on the screen is the image I need.
I try to select the image, or use lasso or wand but it treats the image as a blank image (no matter what layer I'm on). Even when I drag and drop the image to another file, it comes up blank. The only time I do see it is in the original file, but I can't seem to do anything with it.
View 1 Replies
View Related
Apr 21, 2012
How do I get X5 to open with a new blank page as default?
If I enable the welcome screen it asks me what I want to open but if I disable it all I get is a grey area and I have to go to the drop down file menu ans select 'new page'.
View 3 Replies
View Related
Jun 27, 2013
Have some pics in X4 on Windows 7 but same are not opening in X 12/ Windows 8.
When copied from X4/Windows7 and pasted in X12/Windows 8, icon showing blank and on opening a blank document opens.
View 1 Replies
View Related
