3ds Max :: Renderable Lines Not Rendering
Jun 3, 2013
There are a few Aluminum Composite Panels represented in my model.To cheat I use RENDERABLE LINES for the Joint lines so that they show up when Rendered.However, I did something stupid -- like erase all of them. They must have been grouped or something. But they are ALL GONE.SO, I went to earlier versions of my model and tried to do the following:
1. Merge: Fail. I see the Gizmos for the lines, but they are a no show in Wireframe and they do NOT render
2. Import .3ds: Fail. All I see are Green Outlines of where they should be AND STILL do not render.
3. Xref: Fail. Same as attempt 1.
QUESTIONs:
-Why are these lines not able to import, or be seen?
-What other solutions (besides redrawing them) have I overlooked?
View 1 Replies
ADVERTISEMENT
Apr 17, 2012
I'm trying to scale a spring (which is actually a renderable spline). I want it's scalable boundaries to be controlled by two other animated objects.
I thought a simple FFD modifier with a linked xform modifier to the control points would work, but unfortunately it won't let me link control points.
View 4 Replies
View Related
Jul 19, 2012
I seem to be having a very strange and annoying problem with Maya 2013. I cannot change the rederable frame range at all and also some of the other rendering options! I had this problem with Maya 2012 but overcame it by borrowing a friends project file with all the render settings working and then saving a pre-set of those settings.
View 3 Replies
View Related
May 13, 2013
1- I am learning how to use the backburner program and finally got two computers to render an image together. Each line, there are 22, is rendered with different lighting, making the image garbage when stitched together. see attached. Is this a common problem?
2- separate question- is there a way to limit the cpu usage for a job sent to the network?
View 8 Replies
View Related
Apr 19, 2013
I have created a wall panel pattern on my wall surface using the pats and assembly tool. I drew out the pattern using the sketch line tool and I chose a joint condition in between the panels. The joint lines of the panels show up in my 3d model but when I render it the joints lines don't render. How can make my panel joint lines show up in my render?
View 1 Replies
View Related
Nov 23, 2013
I am using windows 7/64 bit and my graphics card is Nvidia FX3700
View 1 Replies
View Related
Nov 23, 2013
I am using windows 7/64 bit and my graphics card is Nvidia FX3700.
View 1 Replies
View Related
Oct 7, 2012
I want to hide feature lines in realistic view. I changed corridor's feature lines style as pic1 but i can still see feature lines (pic2).
View 1 Replies
View Related
May 21, 2012
why i cannot change the color of the background when rendering? It is always black, and i cannot attached or make new material, if need to attach jpeg or new texture on my drawing, cannot create new material. what should i do? im currently using autocad for mac 2012.
View 1 Replies
View Related
Aug 17, 2003
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies
View Related
Oct 5, 2012
Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
View 8 Replies
View Related
Oct 11, 2013
With all of you fine teachers, I have the know-how to get the start and end values of a line.
Do you think there is a way to get a point returned that represents the true intersection of the two lines, without having to involke a user defined "getpoint" function using "intersect" osnap?
View 9 Replies
View Related
Oct 11, 2012
Why I can't set the hidden lines viewbase option to shaded with visible lines mode?
View 9 Replies
View Related
Apr 25, 2012
i am doing a simple project making a survey plot for a piece of land that will be broken into subdivision. all measurements are of my starting point. after plotting the starting point i try to draw line that is 113 feet long and at a bearing of N 5d W i have no problem entering this data but when i hit enter it draws a straight line. now i know 5 degrees is much of an angle so i thought maybe it just looked straight and tried to plot the next point which was 542 feet from the last point at a bearing of N 39d E but once again after i put the info in and hit enter or space it would plot a line of the proper length but vertical, not the proper angle i need it at. here is how i would put in the info:
first i choose the lne command and choose my "beginning point" as that starting point for my line then i type 113<N 5d W for the length and direction and hit enter. when i do this it plots a vertical line of the proper length but wrong angle. what am i doing wrong? i have ortho set to off and idk what else to mess with
View 1 Replies
View Related
Jan 18, 2014
How do I convert Detail Lines to non-plotting Reference Lines or Reference Planes? (or to a reference line that would not plot in the future?).
View 2 Replies
View Related
Apr 23, 2012
I was trying for an option with wipeout mask.
Is there any option with wipeout to turn the continuous lines into dotted lines instead of hiding the object? I have been working on one staircase block, i want to show half block as a dotted lines.. is there any way to do that without going in to the block edit and change? thats why am looking for wipeout mask option.
View 2 Replies
View Related
Oct 26, 2011
what I have to do, in AutoCAD, to make two center lines to intersect on lines and not on free spaces.
View 9 Replies
View Related
Dec 16, 2011
I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
View 2 Replies
View Related
Jul 9, 2012
I have selected several lines (not pl or spl), just lines, all of which are the same layer and such. I want to be able to select all thirty or forty of the lines using either the select similar (lisp, AC2010) or quick select and return a total length of all of the selected lines. In the properties box it shows as varies.
View 2 Replies
View Related
Aug 3, 2013
I want to construct lines between every two line ending point by multi selectio window instead of drawing it manually between lines ending point ?
View 3 Replies
View Related
Oct 29, 2013
[URL]........
When i opened my ai file into ps, it converted the lines into pixels, how do i maintain the vector lines as shown in the link above?
Also, how do i color underneath those lines?
View 1 Replies
View Related
Feb 8, 2013
Trim tool errors when cutting lines with lines CorelDraw X6
View 1 Replies
View Related
Jan 28, 2013
Is there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
View 1 Replies
View Related
Apr 27, 2011
This isnt so much of a problem as an annoyance. When I try to make poly lines from connected single lines my procedure is as follows...
pedit, right click, multiple, select lines/objects, enter, yes, join x 3, esc
My annoyance is if i hit join once it will not make the lines into polylines, if i hit join 3 times or so and then esc it will.
It just doesnt seem that is right and I think i might be missing something. I have been doing pedit this way for a long time adn its probably finally time to figure this one out.
View 6 Replies
View Related
Sep 26, 2012
Any way to convert area boundary lines to room separation lines?
View 1 Replies
View Related
Nov 24, 2011
For some reason, GIMP is putting straight lines off of any line I draw (paintbrush, ink or pencil) and while it's pretty cool, I'd like to be able to draw properly.
View 8 Replies
View Related
Jul 22, 2010
I need to transform a lot of dashed (single) lines into separate lines... Who can tell me how to do this in a few clicks. I don't need an outline of the dashed line. So the black dashes I need, the white in between the dashes I want to loose.
See the example. I need the second lines.
View 8 Replies
View Related
Nov 9, 2012
One more thing that is pretty annoying. I'm working in webdesign and have to work with lines to make designs.
1. There is no chance to scale 1px line to be 2px
2. You cant make from 10px height object 1px line.
From 1px line always staying 1px.
From more than 1px you can make only 2px line not 1px.
Thing happening from X3 to newest X6.
Small things but making my work a bit longer.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
View 7 Replies
View Related
Sep 13, 2012
Civil 3D 2013.
Problem with command from Home tab - Draw panel - Curves drop-down - Create Curves Between Two Lines OR Create Curve on Two Lines.
If you select the Degree option, it draws a zero length curve when you type in a valid number for degree of curve. I have tried entering it in decimal format and as ##d##'. NOTHING WORKS!
View 4 Replies
View Related
Aug 27, 2006
I use "Illustrator CS"
I painted a picture using "Paintbrush Tool".
(Bezier lines )
Is it possible to convert it to Bezier lines drawn by
"Pen Tool"?
View 5 Replies
View Related
Aug 3, 2012
I just recieved a structural drawing from an engineer that has the entire drawing drawn on layer 0. This poses many problems for me as I need to differentiate text from lines and lines from lines. The darwing does have two colors although entities are still on same layer. Is there any way I can seperate the yellow lines from the red lines even though they are on the same layer?
View 6 Replies
View Related
