I'm doing screen capture, and MS Video 1 consumes 10 times as much disk space as H264.
I have tried a number of different codecs, and the result is the same.
I have tried looking at the resulting VideoStudio dump file using MSVS 2008, but there does not seem to be any content.
how I can debug this problem?
I'm trying to add lossless CODECs (e.g., FFV1, Lagarith) to Photoshop (and Premiere and After Effects and Adobe Media Encoder) so that I can generate archival videos with the highest possible lossless compression ratios. I've installed several CODECs, but none of them appear in Photoshop's 'Export Video' options, for example. How do I get these CODECs to appear?
For the record, I'm using CS5.
Somehow VS X4 has forgot several of the avi codecs on my Vista machine.
vsx4_avi options-vista.png (10.25 KiB) Viewed 968 times
Videostudio X3 crashes everytime I try to export a video. It doesn't matter the file type inputed or how you are trying to export it. It even crashes when trying to export one of the default title screens included with the program. Have tried a clean install with no luck. I have also insured I am using the latest version.
View 5 Replies View RelatedI recently purchased a royalty free mpg clip to use in a project and the clip plays fine until I upload it to my project. It goes from color to B/W and is distorted. I contacted the vendor who said I need to update codecs in my editing software. I have the most recent X3 updates installed but still having the issue.
View 3 Replies View RelatedThe error says as follows:
The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis.
C:UsersChrisAppDataLocalTempvstudio_1.6.2.69_20120208_185709.DMP
I'm running Windows 7 64-bit.. There is no error message, it just says Corel VideoStudio X3 has stopped working... The video is only 48 seconds long (A test video) 1280x720 and was recorded at 30fps.
I have an NVIDIA GeForce GTS 250 Video Card and a 3.4GHz processor and 6GB of RAM
I downloaded a trial copy of the Corel VideoStudio Pro X5 Ultra. Every time I click on the Create Video File button the program crashes. I get a message that the program must exit. Every time I try this, it crashes.
View 4 Replies View RelatedI recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies View RelatedI could export to any codec in avi format. Now it seems that only mjpeg, DV Video, uncompressed or xiph.org are available. This wouldn't concern me in the slightest if I was only trying to export video, but I'm trying to get an avi to show up as a material and max simply refuses to let me select it. I even tried re-exporting the video in Mjpeg format and it STILL won't let me import the avi. VLC plays the video fine as does WMP.
Every other program I load (Premiere, Video Studio) has all of the codecs loaded so the part that confuses me is how do I get these codecs to show up in max and why did they go missing in the first place as last week everything worked fine.
I am running PS6 and want to open and edit AVI files. When I try to do that I get an error message saying "the video file cannot be opened" . This seems to apply to ALL avis - yet I can open and edit MP4, MMV etc. I installed Gspot to track whether it was a codec issue and when I try to open ANY file I get this error message : "Warning: DirectShow crashed while GSpot was attempting to obtain information about a codec. This is usually due to damaged, misconfigured, conflicting, or poorly written codec drivers. It is possible, perhaps even likely, that other media players will crash when they attempt to play this file as well, as most of them will also use DirectShow. GSpot was able to intercept the crash, and has attempted to identify the codec or filter involved; uninstalling or reinstalling this codec or filter may solve the problem. The codec was tentatively identified as: C:Windowssystem 32imaadp32.acm Unknown video codec #11". I see a site to download the "imaadp32.acm" codec but what about the "Unknown video codec #11".
I should add that the avi files DO open and play in Bridge. I have the latest Quicktime. Everything is up to date and PS and the computer is otherwise working perfectly !
finally deduced it was when I clicked a video for flagging. I removed the videos from the catalog but that defeats the purpose. I tried the ui.dll and did rename the ui.dll.old file. I unstalled and reinstalled LR5 and update to 5.3. Its working now but like I said I removed the video.
issue was when I put in the ui.dll then LR would not even open up so effectively I did not do the ui.dll because I couldnt,. I did it successfully for lr3 when I had the edit/flagging crashes without issue this is weird.
I cannot get music onto the audio line in Elements 7 something to do with "Codecs", I have recently changed my computer, it does have the latest Flash Player installed.
View 1 Replies View RelatedEach time I make an attempt to import video frames to layers, I get as far as the "select range to import" screen, and then when I select the range and click ok, it says "Adobe Photoshop has stopped working. A problem caused the program to stop working correctly." And then it closes.
My operating system is Windows XP, the photoshop type I use is CS3 as I mentioned before, and I have installed Quicktime 7.3.5.I checked one of the files I tried to use with the Mediainfo program as suggested, and got the following:
Format: MPEG-4
Format profile: Quicktime
Codec ID: qt
File size: 176 MiB
Duration: 18mn 33s
Overall bit rate: 1 327 Kbps
Writing application: Lavf53.24.2
I have a Fujifilm HS20EXR folder which contains video.Each time I select the folder, LR5 (Mac ML) crashes.
View 3 Replies View RelatedFew hours ago Premiere were working perfectly, but I updated the Intel HD Graphics 4000 driver because the new version have OpenCL support, and now every time I open a Premiere Project, it crashes after a few seconds. My computer is a Lenovo G400s Laptop with Windows 8.
View 6 Replies View RelatedI am running Lightroom 5.3 and a fairly fresh install of Windows 8.1 / 64 bit. It works perfectly when I use my local machine, but when I access Lightroom over Microsoft Remote Desktop from another computer, as soon as I try to open a video, Lightroom crashes.
I have tried reinstalling, rebuildin library, etc. But, it still crashes every time. I'm pretty sure this is a bug with the software.
I use remote desktop for most of my lbrary management and it's really frustrating when it crashes all the time (note that it will crash often just if I go to to the video folder, even if I don't try to play one!)
When I try to run a stress analysis on my model my video driver keeps crashing. I have updated my driver and downloaded the patch from the auto desk website. In addition I have played around with the visual settings on my computer and nothing works. I attached my computers specs.
View 1 Replies View RelatedIs there any way to push the video in the video track after the title track is completed ....
View 4 Replies View RelatedSometimes (only every now and then), when I try to render a project to AVI VS instantly crashes. Lets say I have three projects, project1, project2 and project3. Project1 & 3 will render to AVI just fine, every time. Project2 will crash every time I try to render to AVI. I can render any of the projects to MPG, MP4, WMV, whatever else I want. If I recreate project2 from scratch as Project4, it will then render to AVI just fine. If I remove >>EVERYTHING<< from all timelines in project2, then add a new clip that did not exist before, it crashes when rendering to AVI. Project2 contains both AVI and MPG clips created/captured with VS X3 just a couple of days prior. VS X3 has all the latest updates.
When I say render to AVI I mean I select Share->Create Video File->Custom->AVI and leave it at the default of 24bits, 720x480, 29.97fps, Lower Field First, Uncompressed, PCM, 48.000kHz, 16bit, Stereo. Video on the timeline includes MPEG-2, Lower Field First, 24bits, 720x480, 16:9, 29.97fps, VBR, LPCM, 48000Hz, 16bit stereo and Microsoft AVI OpenDML, 29.97fps, 30532.12kbps, uncompressed, 24bit, 720x480, PCM, 48000Hz, 16bit, Stereo.Although this is a rare occurance, it is a real pain to have to recreate the video from scratch every time this happens.
The computer is a new Windows 7 Pro 64bit, Core2Duo E7500, 4GB Kingston HyperX RAM, 750GB WD Black SATA, Radeon X1550, Asus P5QL/EPU, Pioneer SATA DVD+/-RW, Antec 380 power Supply. Windows has all updates, AV is Microsoft Security Essentials, software installed includes VS X3, Adobe PS Elements 8, Super Video Converter, Office 2010, Nero 8 Essentials, Microsoft Expression Web 3, QTIndexSwapper2, Filezilla, Audacity, Adobe Reader 10 and supporting software that those applications install.
I have a problem with VS X3 due to the fact that the burner crashes. I have made some DVDs with it previously. I have loaded VS X4 trial version and that will burn the DVD. I do not feel that I should buy the new version just to get the burner. The error message is:
Stopped working
Problem signature:
Problem Event Name:APPCRASH
Application Name:BurningApp.exe
Application Version:1.0.0.50
Application Timestamp:4b293ba0
[code]...
I installed a trial version of Pro X5 with Windows 7. Almost every time I try to capture video it crashes.
Camera is a Sony HDR-HC5E. The only format I am offered is MPEG. Sometimes it begins to capture, other times there is no picture on screen and nothing is captured, most times I get a NOT RESPONDING warning and Video Studio just freezes. Sometimes it works but very rarely!. I have reloaded X5 three times.
I just bought VSx4 but I noticed it crashes as soon as I try to capture
my camera: canon HV20 -firewire connected
my OS: windows 7
I already:
uninstalled, re-installed VSx4
turned off/pc - camera
connected/disconnected camera
since I installed vsx4 I can't capture in vs x3 too.
First, it took several days just to get it to install. It finally installed after a sys restore and I was off and running. I really liked the package, especially Express. I played with it for a day, liking it more and more, and then all of a sudden it says " Corel has stopped working". Does this when I trying to do anything. Last thing I did was edit a few old clips and put them back in the folder with the originals (renamed). Could this have caused it? This is getting to be a High Maintanence program.
View 2 Replies View RelatedI purchased Ulead Video Studio 10 for my son about 4 or 5 years ago and installed it on his Vista machine. When first installed, it worked great. After a few months, it began freezing and/or crashing his computer. I was unaware that he was having problems. He just kept rebooting and then continued until his project was completed, or just got frustrated and quit the project.
When I discovered he was having these issues, we found and ran the available Ulead patches, which improved things a bit for a while. Then, having issues again shortly thereafter, we upgraded to Video Studio 11, which again improved things for a short while. He has been unable to complete a project within the last year. Video Studio is at a point now where it freezes constantly and Vista pops up the message “Ulead has stopped working” with a “Close Program” Button. Sometimes it takes 10 or 20 minutes to freeze, sometimes it freezes instantly and sometimes in between.
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
VideoStudio PRO X3 crashes very often when rendering a VSP-file (with m2ts videofragments) that contains also transions and text.
It happens when I want to create a HD-file (PAL, Blu-ray /MPEG or H.264/ 1920*1080). Disabling SmartRender did not work. Also setting off hyperthreading did not solve the problem.
The problems do not occur when the VSP-file only contains m2ts fragments.
The recommendations given by Corel Helpdesk (download & install VS updates, C++ and DirectX updates) were not very useful because I had already implemented the most recent updates
My current version of VS PRO X3 is 1.6.2.69.
- Does these kind of problems also occur with VS PRO X4 Ultimate?
I've been using VSX4 for about 4 weeks without any problems, aside from the very occasionaly crash. The last time I used it was three days ago.
I've tried to use it today to find it crashes at startup every time. I have restarted my PC several times to no avail. As far as I can recall, I have not installed anything in the last three days, or updated drivers.
I have uninstalled and then reinstalled. Again, to no avail.
VSX4 creates a dump file each time, which I can't view in any software I have.
I have tried contacting Corel but get a very cryptic message that a case has been created then "Case creation fail" message!
So I had VS x3 and it started to give me serious problems, i.e. no longer able to export to MPEG-HD, So now I have X4 thinking it would resolve my issues, but no. Now I cannot even launch X4, as soon as it opens I get an 'unexpected error, program needs to close' message. It freezes immediately, and I cannot even open any menu items. I have tried removing and reinstalling QuickTime 7.55, also tried updating my codecs and uninstalled/reinstalled VSx4, none of that worked. I installed this program on my desktop, and it works fine there but ther only difference there is my desktop runs Vista Ultimate 64-bit, and my Alienware M11x runs Windows 7 Home Prem 64-bit.
View 5 Replies View RelatedI've been a VS users since version 6 and have been able to work around the many nuances that each version upgrade had. I upgraded to VS X4, got myself a blu-ray burner and some BD-R's, and prepared my home videos. I'm consistantly geting the 'Unspecified Error 5:0:0' during the burning stage. After 6 wasted BD-R discs,.
Camera: Canon Vixia HF20, all AVCHD formatted video
Background music selected for all menus
Motion menu checked (tried unchecked as well)
No background image (using one of the provided 8 templates)
Moving path unchecked (tried checked as well)
Menu In/Out: none (tried both enabled at default, initially)
Video length is 19.66GB total, 26 menued video segments
I've updated to X4 SP1
I even tried copying over the afCvtTitleMenuRenterUnit.dll 'fix'.
For the video segments, I initially let X4 render them all. When it failed, I created video files (previously my standard method when making discs), creating .m2t (blu-ray H.264 (1920x1080)) for each segment and used those video files for all future burning attempts (as opposed to the VS Project files).
I can see the blu-ray disc has almost fully been written to after ejecting it (after the error). However, it can't be read either on my computer or on a standard TV blu-ray player.
I haven't tried burning a DVD yet, and will try that next to see if this is just related to blu-ray discs, or not. I can't really tell if all of the other posts on this similar topic were in regards to DVD burning, or blu-ray burning.
Running into this issue on earlier verisions, I was able to make an ISO file then burn a DVD with other software. That option doesn't seem available for blu-ray discs?