I recently purchased a royalty free mpg clip to use in a project and the clip plays fine until I upload it to my project. It goes from color to B/W and is distorted. I contacted the vendor who said I need to update codecs in my editing software. I have the most recent X3 updates installed but still having the issue.
View 3 Replieswhen I split an Avi file I have, if I have the clip selected and highlighted, I get audio. If I click on the time line, so no specific clip highlighted, I don't get any audio?
If I create a file, the produced file has no audio
I have a Videostudio X4 problem. I want to compile multiple small clips into one long video. Each small clip might contain an accompanying music track and title track. However, if I try adding a new clip somewhere *previous* into the timeline, the music and title tracks don't stay synced in their proper timestamps relative to their original video track. I hope that makes sense. This requires me to re-sync every secondary track to their rightful video tracks.
Is there a way I can "freeze" (for lack of a better word) every separate video track with their respective secondary tracks? I assume it has something to do with ripple editing, but I've never been able to make it work properly (for example, when I try swapping clips in the storyboard view, I get a "this will break the relative positions of the clips" warning).
Somehow VS X4 has forgot several of the avi codecs on my Vista machine.
vsx4_avi options-vista.png (10.25 KiB) Viewed 968 times
I'm doing screen capture, and MS Video 1 consumes 10 times as much disk space as H264.
I have tried a number of different codecs, and the result is the same.
I have tried looking at the resulting VideoStudio dump file using MSVS 2008, but there does not seem to be any content.
how I can debug this problem?
When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies View RelatedI've had a simple lisp I've been using for years that suddenly disappeared. It required that you identify a block name, tag name, and the value that you want the tag to be. All of this is performed via command line, so it is scriptable. Since I lost it, I've been experimenting with -attedit. This command comes frustratingly close to what I'm looking for, except it only appends an existing tag, or replaces a specific string within the tag; I can't get it to replace the entire tag, regardless of its value.
1> Any lisp routine that does what I describe?
or
2> How to make -attedit replace a tag value without regard to what the value currently is (like a * wildcard)?
I used to have this problem with CS5 and hoped it wouldn't happen again when I bought in to CC.
In the timeline certain audio tracks will not allow me to enable clip keyframes. When I try the 'add keyframe' button is greyed out. I can add track keyframes no problem but using them is a lengthy work around. The error also seems to be radom and trashing my prefs makes no difference.
Specs are:
iMac 27" 3.4GHZ i7, 16GB DDR3, Radeon HD 6790M 2GB
So I have a soft imported clip with cfx applied...right click consolidate handles...and it seems to work...
But then archiving gives a crazy size estimate so I checked handles again...it turns out the handles haven't been consolidated at all. Timeline says it has been consolidated but entering cfx and exiting again the handles come back.
I could export to any codec in avi format. Now it seems that only mjpeg, DV Video, uncompressed or xiph.org are available. This wouldn't concern me in the slightest if I was only trying to export video, but I'm trying to get an avi to show up as a material and max simply refuses to let me select it. I even tried re-exporting the video in Mjpeg format and it STILL won't let me import the avi. VLC plays the video fine as does WMP.
Every other program I load (Premiere, Video Studio) has all of the codecs loaded so the part that confuses me is how do I get these codecs to show up in max and why did they go missing in the first place as last week everything worked fine.
COPYBASE & PASTECLIP Command not working
View 3 Replies View RelatedI am using ACAD 2000. My wblock and copyclip commands are not working only in one specific drawing. I am working in modelspace.
When I wblock it lets me select the objects and assign a file to save the objects to. When I hit OK it gives me no error but no file is created.
When I copyclip it gives me no error, but when I pasteclip, nothing happens.
I tried saving the drawing as something else. This drawing simply won't let me copyclip or wblock. I can use the copy command to make multiple copies of the object in question within the drawing. I tried restarting my PC and this particular drawing still has the same problem. Other drawings are fine.
I am running PS6 and want to open and edit AVI files. When I try to do that I get an error message saying "the video file cannot be opened" . This seems to apply to ALL avis - yet I can open and edit MP4, MMV etc. I installed Gspot to track whether it was a codec issue and when I try to open ANY file I get this error message : "Warning: DirectShow crashed while GSpot was attempting to obtain information about a codec. This is usually due to damaged, misconfigured, conflicting, or poorly written codec drivers. It is possible, perhaps even likely, that other media players will crash when they attempt to play this file as well, as most of them will also use DirectShow. GSpot was able to intercept the crash, and has attempted to identify the codec or filter involved; uninstalling or reinstalling this codec or filter may solve the problem. The codec was tentatively identified as: C:Windowssystem 32imaadp32.acm Unknown video codec #11". I see a site to download the "imaadp32.acm" codec but what about the "Unknown video codec #11".
I should add that the avi files DO open and play in Bridge. I have the latest Quicktime. Everything is up to date and PS and the computer is otherwise working perfectly !
I'm on PR5 and up until today backburner has been working fine. For some reason its stopped. here is the error message from the file I'm trying export:
tddetedit2 2687747392 transcoderMediaProvider.C:312 11/08/12:13:57:26.290 Cannot get type of clip IFFFS-20:/stonefs/YEC_2012/workspace/_Export_121108_133458_1/H_16777343_S_1352399698_U_44950/hires: Library _Export_121108_133458_1 not found
I'm trying to add lossless CODECs (e.g., FFV1, Lagarith) to Photoshop (and Premiere and After Effects and Adobe Media Encoder) so that I can generate archival videos with the highest possible lossless compression ratios. I've installed several CODECs, but none of them appear in Photoshop's 'Export Video' options, for example. How do I get these CODECs to appear?
For the record, I'm using CS5.
I just downloaded the videostudio X6 trial version. For some reasons, some sequences from mpg clips I added to my project seems to be repeating itself for no reason. The bug occurs within a unique sequence and might change the "restart" position while the timeline cursor.
Ex: Original video = Cow cross the road, a car hit the cow then the car explode and finaly a generic
After importing the original video = Cow cross the road, a car hit the cow then the car explode, then the car hit the cow a second time
If I move the cursor right to left a couple of time, it might end up missing the first part of the clip where the cow is suppose to cross the road (replaced by a second car exploding)
It's a single clip and the final display is changing even if I don'T touch anything. I use to be a Ulead video studio user and I never had such problem.
I've been doing a project using two different cameras, I've done some of it and saved as a .mpg without a problem.Now for some reason I cannot use the split clip tool it is greyed out all the time no mater how I have the clip in the timeline be it set to clip or project.
I made one cut to align two clips now nothing..As I say I've completed three parts of the project without a problem using the split clip tool.
Working with a 1080p/60fps mp4 file from my GoPro 3. Trying to save a trimmed clip using "same as first video clip" option. Everything seems to work fine but the saved clip plays for a second and then the video freezes but the audio continues. This happens playing the clip with WMP and VSx6. The original untrimmed mp4 plays fine.
View 14 Replies View RelatedI cannot get music onto the audio line in Elements 7 something to do with "Codecs", I have recently changed my computer, it does have the latest Flash Player installed.
View 1 Replies View RelatedHow can I make a white colour clip the same shade as the white vignette filter.I want to place overlayed images with a vignette onto a white clip on the main video track so that they blend seemlessly in X5.
View 12 Replies View Relatedcertainly the topic has already been covered but with the hundreds of responses I struggle to find it, then propose it a new:
how do I put in the time line already been settled for good, a video clip so that the whole time line moves?
Note: I added the other video clips in many 4-track, not using the main track, which is empty.So should I insert a video clip that I had forgotten about 20 minutes before the end, so you have to move automatically all the work (including effects, subtitles, etc), so it all coincides, without having to move the whole hand. ...
I've been using Videostudio Pro X4 for a few days now and I've seem to have run into the problem of losing the audio of clips after I have muli-trimmed them. It doesn't matter where I multi-trim them in the timeline, after I have confirmed the trim I lose the audio for the clip?
Let me be clear: the audio for the clips work perfectly before any editing ie. trimming and they are placed in the main video track. The clip formats are mainly AVI, MP4 and DivX AVI and have varying lengths.
How to rotate a clip through 90deg?
View 5 Replies View RelatedHow do I delete both the thumbnail and the clip from my computer ? The Delete in the library only deletes the Thumbnail.
I want to clear the unusable files from my computer.
How can I add multiple titles to the same clip, but enter the clip at different times ..?
I am trying to add a title by having "____ production presents..." (fades out) (fades in) "Title of Movie"
I've been using VS 11.5 Plus for several years with no problem. Recently, I received a new camcorder, a Sony HDR-CX305 which produces .MTS files. I can open the files with VLC and Windows Media Player. For editing in VS, I chose to use proxy files. When I put the files on the timeline and play them in project mode, everything is fine (display & sound). But in clip mode, the clip is played really fast, less than 1 second, which makes difficult the editing.. I tried with smart proxy disabled : same problem.
View 4 Replies View RelatedI am a Video studio PROx4 user. Recently, I had some old 8mm films transferred to video and now I'm editing them in Videostudio prox4.
I have a few clips where I want to add sound; HOwever, when I drag the sound clip to the Voice track or the music track, the clip remains silent. The original clip seems to have a audio track already. I can split the audio and the delete the track from the voice track, and then unmute it and re-submit the music track I want to use but it somehow doesn't do the trick.
I'm able to pan and zoom when I put a still image in the timeline, but when I put a video clip, the option is gone?
How do I do what I want to do if I'm simply trying to pan and zoom in a given video clip?
In videostudio x6, How to zoom and pan on a video clip.
View 1 Replies View RelatedWithin a DVD menu I created a motion menu. However I don't want to have the first clip as introductory video for the motion menu. I unmarked the checkbox named "use first clip as introductory video and added, in the first page of the Share - DVD, the clip that must be played in the motion menu (moved the clip most left).
In the menu itself its now fine when nothing is selected, though when selecting the total video to play, the selected video file of the motion menu starts to play where the first video file (clip) must be played. I know that in the main menu I can select the first clip to play as well but that's exactly what I want to avoid..
I removed all chapters since I don't like to have a sub-menu. Just one overall main menu to play the total video, and in the DVD menu in the motion menu only, I want to see (and not select) the chosen clip.
I am usin the trial version of VideoStudio. After a lot of fiddling about (VideoStudio didn't recognize my camcorder) I was able to see my video clips in VideoStudio by placing my memory card in an external card reader. Whilst all the clips appear, VideoStudio informs me that there are no valid video clips.
View 9 Replies View Related