Few hours ago Premiere were working perfectly, but I updated the Intel HD Graphics 4000 driver because the new version have OpenCL support, and now every time I open a Premiere Project, it crashes after a few seconds. My computer is a Lenovo G400s Laptop with Windows 8.
View 6 RepliesI'm updating drivers for Computers with Nividia Quadro 4000 video cards. I went to the Nvidia website and found two drivers. one I found that was certified for AUTOCAD 2013 and the version is 310.50. And another driver for the video card version is 311.50. should i download the newest version or the ACAD Certified version? Could the "Certified" version download not be current? Are there any drawbacks from one to the other?
View 4 Replies View RelatedI have an Nvidia Quadro FX1500 graphics card on XP64. Getting the correct video driver for ACA is critical as we all know. I did a search of the Adesk web site and one page told me to use version 259.57, while another page told me to use version 265.70.
The page telling me to use the newer driver was under the certified hardware page, where ACA is not a choice in the product used, only acad.The page telling me to use the older version was under the ACA support page.Then I go to the Nvidia web site and they tell me to use the 191.00 version.I'vehad a look nside the hardware XML installed with 2012 and te supported driver version is 6.14.0012.6570.
When I try to run a stress analysis on my model my video driver keeps crashing. I have updated my driver and downloaded the patch from the auto desk website. In addition I have played around with the visual settings on my computer and nothing works. I attached my computers specs.
View 1 Replies View RelatedI lost my driver disc for the capture card of Video Studio 10 Professional. And I can't find it on COREL website, even in Google.
View 14 Replies View Relatedi've looked on the radeon website to see if there are any driver updates for the radeon 7750 card.it has all updates for the 700 series but not the 7750. Any link for 7750 driver update.i've had cs6 extended for 4 months and ive not really used it because of the problems im having.gone back to using my old cs5 extended which i have no problems at all.
View 2 Replies View RelatedI have a Canon CanoScan 8800F and I can scan from CS3 just fine for a little while, but eventually, it will give me the following errors: "ScanGear: Cannot communicate with scanner. Cable may be disconnected or scanner turned off. Check status. Scanner driver will be closed." followed by: "Could not open the TWAIN source. Make sure there is a valid source for your scanner in the TWAIN directory in the Windows directory" If I reboot my computer, I can scan through Photoshop again, but only for a few minutes. Anyone have any tips or suggestions? I've updated the drivers for the scanner and I'm running the most up-to-date version of CS3.
View 6 Replies View RelatedI have a brand new HP Probook 4530s with the correct requirements to run LT 2012 as well as a certified and tested graphics card and latest drivers, but as soon as I try using offset or trim functions while drawing, my screen goes blank for about 4 seconds and an error message below tells me my Display Driver has stopped working and has recovered.
No matter the screen resolution settings, it still does the same, also the laptop is still cool, so can't be a heat issue.
I'm using Premiere Pro CC on Windows 7. I previously was able to import and edit clips via exactly the same workflow - but now, not matter what clips I import, they all appear as the 'white screen'. The thumbnail is a frame of the video, but as soon as I mouse over, scrub, or try to play the clip, it turns totally white. Audio will play fine though.
Â
I'm almost positive it has to do with using an AOC display that plugs in via USB. This is based on a similar issue I had using that display on a Mac and having part of a Blackmagic Design software UI not appear while using that screen.Â
Â
I've tried lots of things, including updating the driver for my graphics card, from the manufacturer's site. I can try - especially a way to undo whatever was done when I plugged in that USB display (worked without manually installing any drivers).
Due to some issues, I was told by HP support to update my display driver. I now have AMD Radeon HD 7950 but since installing this, Photoshop CS5 Extended and 64-bit keep crashing. I'm given the error:
Â
 Photoshop CS5 has stopped working
Â
Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU Enhancements. Check the video card manufacturer's website for the latest software.
Â
GPU enhancements can be enabled in the Performance panel of preferences?
Not sure if I could have been more specific in the title; however, I have been having the following problems after using CS6;
Â
1. Images are blacked out in the viewing area where the layer is still showing the thumb nail image.
2. A few crahes incl BSOD
3. Unable to launch Bridge (has worked previously)
4. Unable to drag and drop images w/o creating a copy of the layer. This appears intermittent.
Â
Attempted fixes;Shutting down CS6 appears to provide a temporary fix on the black out.Purged the temp storage areas in ACR and CS6 Checked the enviromental variables and the temp directories are on the C drive (Home)OS Win 7 64Bit Ultimate RAM 16 Gb CPU AMD 965
Storage: C: 500 Gb 160 Gb free
Scrartch Disk: 20 Gb available
Video Card: ATI RADEON 5670
Â
CS6 was an upgrade from CS4.
Can I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies View RelatedHow can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.Â
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
I just updated my Catalyst to 13.1 and now here is how some of my blues look like: [URL].... how to fix this besides rolling back the driver?
View 7 Replies View RelatedSo what to do? How does this interrupt my use of all the functions in photoshop? I am a creative cloud member, so I am all up to date. This is the message I got.
Â
There is a problem with the video driver in Photoshop, and extensions that use graphics hardware is temporarily disabled. See the website of the manufacturer of your video card to get the latest software. To learn more, see: [URL]...
when I upload a video to You Tube, I get a warning message that my video and audio are out of synch. Once uploaded, the video plays just fine, looks great. But I don't know why I get the warning when I upload. Video clip and audio track are the same length.
View 1 Replies View RelatedGimp will not load up for me. It'll start the process, but it stops when it is "updating tag cache" and then I get a Windows message that says that Gimp has stopped running and to close it down.
I have uninstalled and reinstalled it. Several times. No new brushes or fonts. I actually removed some. I believe I am running the latest version of Gimp. I don't know how I can check to make sure.
I finally updated my CS6 suite. Eveything seemed fine until I opened Illustrator. Crashed
View 1 Replies View RelatedI have installed ATI Firepro 2250 (256 MB) Graphics Card with my Dell T5500 Workstation. When we are open Inventor its crash automatically & shows error report send notification. I have send many times this report but no reply. I have worked Inventor 2010 all service pack applied.
View 4 Replies View RelatedTrying to print from LR 5.3 RC using .icc profile in printer settings in Epson Pro 3800 driver the Color Settings and Color drop downs are disabled???? In other applications these options are enabled and selectable.Â
View 3 Replies View RelatedAutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. Â The response was to install service pack 2. Â Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
I have AutoCAD 2013, and my laptop specs are as follows: Intel I7 Processor12 GB RAMATI Radeon 7670M HD Graphics Card Whenever I start AutoCAD with the Radeon graphics card installed and enabled, it crashes giving me the following error:
Fatal Error: Unhandled Access Violation Reading 0x0020 Exception at 5d79264dh
However, the moment I disable the graphics card from the device manager, AutoCAD works fine. I tried installing the latest drivers and everything, but still AutoCAD crashes. I was surprised to find the same thing happening with AutoDesk Revit 2013 as well. I know the problem is with graphis card
Trying to import images as dng and crashes my computer. It writes to a temp folder and cannot delete the temp folder bc there is error in writing to it. Mac OSX. Have done this many time with no problem. I can make adjustments inside the program and when I export the modified images to another folder it writes to a temp folder as well. but doesnt crash the system.
View 1 Replies View Relatedwhich video cards/technology on Video cards are best for photoshop.
View 5 Replies View RelatedCurrently my display card is a NVIDIA Quadro FX 500/600 PCI. One of the reasons I chose this card is it supprted dual montors. Now that I have upgraded to CS4 Extended I need to upgrade my display card.
When I went to Adobe's List of tested graphics display cards for Photoshop CS4 and seen such a long list of cards for Windows.I thought I would come here and ask if any body else has upgraded theirs. I would perfere to go with a nVidia card. Do any of these cards support dual monitors? Or how can I keep using my two montors?
I have a Dell Dimension 4600i with the stock Intel(R) 82865G Graphics Controller, and 4 gig of ram. I use Photoshop CS3 for my digital scrapbook business, working with image files that are often almost a gig. Besides tweeking PS and XP to get the fastest performance I'm thinking I probably need a beefier video card. I've read decent reviews for the GeForce 7600GT and other video cards but these are aimed at gamers. The sales rep at Dell seemed to think that their top video card wouldn't be that much better for Photoshop work.
Are there video cards out there that would speed up PS? Is it a waste of money getting a card designed for gamers?
I'm having a laptop built mainly to quick edit/cut photoshop files. They (pc club)recommend a nvidia 8600gt 512 card. Will this work well for photoshop editing. I still use my desktop for the main photoshop work.
The system I'm looking at is:
Window XP home, nvidia 8600gt go 512mb graphics, intel core 2 duo 2.4ghz, 2gb ram, 200gb sata 7200rpm drive, 802.11n wifi, and 10/100/1000 network card.
I'm a landscape photographer and have used photoshop for several years...my current version is cs1....my system crashed and now in the process of having a new system built.....I will upgrade to cs4...now this is my question what video card do I need?
View 2 Replies View Relatedwhat the Best video card to speed up photoshop is? I don't use this machine for any 3D (gaming or otherwise) I just want to speed up the filters and file handling of photoshop. The computer has an 8X AGP port , 1GB RAM , 2.0GHZ Athlon cpu.
I currently have an matrox g450 vid card.
I have been experiencing constant crashes to the desktop using a fresh install of CS6 while attempting to use the text tool.
Â
My other problem is that photoshop does not seem to detect my graphics card, it says "Photoshop has detected an error in your display driver" and I cannot access any of the GPU options.
Â
I have updated to the latest version of Photoshop. I have the latest drivers for my graphics card.
Â
My setup:
Â
3570k
7950
8gb
1680x1050 + 1024x768
Windows 7 64bit
How can I get both the 32 and 64 bit versions of CS6 to detect my graphic processor (AMD Radeon HD7700) for GPU usage in Win 7 ? Cuiurently, it is only seen in 64 bit.
View 19 Replies View Related