VideoStudio :: Insufficient Memory When Selecting Certain Filters
Mar 4, 2013
Why I am getting a "insufficient memory" error 15036:0:0 when trying to select certain filters such as "Auto-Exposure" and "Brightness & Contrast"? Other filters can be selected without getting this error.
My project in AI CS4 (WinXP) is not able to place (import) a 600dpi image (size is 35mb). The error message says "Insufficient Memory was Available to Complete the Operation". The same image at 300 dpi worked where the 600 did not work. There is 3gb of RAM on my machine. I am wondering if there is a problem with AI here, and if there is a way to allocate more memory to the program. I don't mind using the 300-resolution image, but would like to learn something about Illustrator from this issue. Is there a way to fix the problem or to adjust the memory usage in Illustrator CS4?
I am having a problem opening some larger revit models (100MB plus) in revit 2012 I will receive a message saying:
Insufficient memory for load. This computer does not have enough memory to open 'file name' in autodesk revit architecture 2012. Increase the available memory or contact Autodesk support for more information.
We are working on Windows XP SP3 with 3.23gb RAM. Now normally it would be as simple as upgrading the RAM on this machine to 4GB as specified in the system requirements for 2012, but a previous computer I was testing with only 2GB RAM was able to open these files without any issues (despite being a little slower).
The only difference I can see at this stage is the 3GB switch is enables in the 2gb machine.
I got “Insufficient Memory” error messages in working on the job needed large files ( > 100MB) with AI 5.5 in office with below #1 PC spec. Error message starts to happen after working 15min to 1 hour depends on the file. I need to restart computer in each “Insufficient Memory” error message pop-up (otherwise the messages will continue to pop-up). Sometimes the file can’t be saved after the error message occurred.
I have never encountered this memory issue at my home with below #2 Mac spec.#1 PC spec looks better than #2 Mac spec. Why PC can’t perform like Mac does? Do you have any solution to fix the “insufficient Memory” issue in #1 PC spec? I had already reset the AI preference as the following link but it doesn’t work. URL...
I use Illustrator CS 5 and am working with a large image. Problem is, when I sometimes try to save my Illustrator file as a joeg I get the dreaded "Insufficient memory was available to complete the operation" error message. It doesn't happen every time BUT when it does its a pain because I have to close all my programs and restart my computer.
while working suddenly everything disappears from the monitor freezing and the file can not' be saved or recovered. The message that appears is insufficient memory. It 'a problem that often appears when I use the text or any changes to the text.
Coreldraw is a 32 Bit Windows xp professional and my pc has 3 GB RAM Intel Core Duo CPU E7400 I can't resolve this problem until now.
Using VS 9 to create an 82 minute project I'm trying to export it as an AVI file. At the end of the rendering process I get the message "insufficient space". I've tried twice, once on C drive which shows 340GB unused and also on an external drive that shows 196GB unused.
I've noticed that on the timeline the clips total 1hr 22min but there is then a long empty portion that goes to 3hr 10min.
I am still using VS X2. With my old Canon digital camera (avi files) I have been successful in editing and burning many avi projects of 2 hr duration. Since this camera broke down, I bought a Canon Vixia HF M31 HD video camera and recorded in XP+ resolution (1,440 x 1,080). The footage was then saved to the hard drive using the Canon provided Pixella Imagemixer 3 SE as mts files.
No problems were encountered in editing the footage with added captions and added background music (VSP file). Even when I rendered the VSP project of 30 min duration, it did not show any problems.
However, when during editing I played the project with or without added background music, after about 1 min VS X2 stopped working. sometimes an error message warned me "Out of Memory".
So, I added my system memory to the maximum 8 GB and VS X2 still stopped working. I monitored the memory usage with Windows Task Manager and saw that during the play back the memory usage kept going up and when it reached about 900 MB used, VS X2 stopped. So, when playing back the VSP file, I had to stop the playback when the memory used was around 850 MB in which case it dropped back to around 110 MB. Then I could continue playing and repeated the "stop" and "continue".
I edited the mts files as MPEG-2 files. Here is the properties of the edited file:
- File Format: NTSC HDMV - Video Type: H.264 Video, Upper Field First - Attributes: 24 bits, 1440x1080, 16:9 - Data rate: Variable (max 12000 kbps) - audio Dolby digital 48,000 Hz, bit rate 256 kbps, layer: none
My questions:
1. Is the Upper field first correct?
2. Should I have edited the mts files as avi files in VS Project Properties?
3. If 2) above would not be possible, is there a way to convert all the mts files first to avi files using what software before editing with VS?
Probably a well worn topic but I've lost all my video filters in VS Pro X2? Just trying to crop some green screen shots that still show the garage wall.
When I open VS and insert video, the "Edit" tab (in the topmost horizontal tab bar) is highlighted and I see the Overlays in the righthand panel: if I click on other tabs they highlight and show the appropriate options in the righthand panel.
However, when clicking on the "Attributes" tab (halfway down the righthand panel) the panel goes blank: if I click on the adjacent "Video" tab the panel remains blank.It seems that I have lost Video Filters.
The Video Filters option shows in the dropdown box, with an "All" to the left of it, but nothing shows.
if there are any tutorials using PIP for VS X3. Also have found that some of the FX filters do not work and I was of the understanding that they were included with purchase = such as Ripple and Twist? I sometimes get a message when trying to use one of these FX filters asking me to register - what is that for is it for the newsletter from Blue FX?? I do not want the feature if it is only a trial and then you discover you can't remove it like previously.
I have renamed my vfilter.rsf with no results, as well as the other fixes suggested in this furum for VS10. There does not seem to be a topic for this issue for X2.
I have recently bought the upgraded version of vsx2 (upgraded from vs10) and AGAIN i have experienced lost video filters.
The symptoms are slightly different, "video filters" are still listed in the drop down menu but when I click on them a tab pops up that read "all" when I click on that the library clears and only empty space is there, no filters. Is the fix the same as it was for VS10?
I have a problem with the audio of one of my video projects. During the actual video shooting, the microphone had acoustic problems and it is heard on the recorded clips.
I had split the audio from the video and want to use some audio filters on it to see if it works, but the audio filters choice on the clip menu is greyed out. How I can enable the audio filters
Corel VideoStudio Pro has the ability to apply multiple filters to a video. There are buttons to change the order of a filter. However, it's not clear to me which order they are applied to the video clip.
Are the filters applied from the top of the list down or layered on top of each other from the bottom of the list up?
What are the steps to apply filters to all my video clips in Corel Videostudio? I am able to drop each each filter to each of the clip. But when I try - Select all clips - Drop a filter to the selections, it does not work as expected. Instead the filter gets applied only to one clip.
Is there any other way to achieve what I am doing - Automatically fix exposure and colour levels to all clips?
I have Pro X4 ultimate. Sommes filters transition 3 D like cube floating don't work. I have reinstall many time but the result is the same. The others filters are OK.
How to restore my video filters which suddenly disappear. There is no way I would have accidently deleted the features as the program does not allow me to do so. I downloaded the software but the problem still persists.
I tried the trial version of VideoStudio Pro X4 without any issue. So I decided to buy it and install the official version from CD. And now, with this version I get the following error message while trying to create a fideo file No combination of intermediate filters could be found to make the connection [17128:1:4]
I checked internet and saw how to troubleshoot the issue. I removed everything and added functionality to the project. It does not matter at all. I always get the error message. Even if I add one video from a cam without changing or adding anything to it. So no filters are used, no nothing.
Settings: I use "same as project settings" NTSC non-drop frame [30 fps] Microsoft AVI files 24 bits, 320x240, 30 fps Upper Field First Uncompressed PCM, 48.000kHz 16 Bit, Stereo
I would like to take my many photos and videos and be able to batch edit a folder's worth at a time after they have been added to my timeline. I have several that have the same lighting problems and that would save me allot of time.
I have Lightroom v. 4.1. In the process to update to v. 4.2, I receive a message that disk space is insufficient. There is over 500 GB on the hard drive. The update is halted at this time. I am using a Mac, OS Lion.
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
I have Video Studio Pro X2. When creating a DVD, I would like to select an Introduction Video other then the first video clip. This is the video that runs on the DVD template when you first insert the DVD and have the menu on the screen. I video taped a wedding and I would like the Intro video to be of the bride and groom which is not the first video clip on the DVD.
I downloaded and installed GIMP 2.8.8 in Windows XP. The Filters menu option shows only Repeat last, Re-show last and Reset all filters.Nothing else in there. Where are the filters?
I have hardly ever used filters for any of my work as I have preferred using Xara's native tools and effects to get what I wanted. But recently, I was inspired by some animation work which used backgrounds painted in Photoshop. They used a lot of textures which enhanced the look of the animation and so I thought I'd try to simulate it within Xara.
It works very well and I can export it as a PSD retaining the layers and Alpha channel. But here come my questions.
1. How can I remove the two Alien Skin demo plugins as I already have the full versions.
2. Why don't the native Photoshop plugins--Artistic, Sketch, etc.--seem to work?
When first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?