Revit :: Error / Insufficient Memory For Load
Oct 19, 2011
I am having a problem opening some larger revit models (100MB plus) in revit 2012 I will receive a message saying:
Insufficient memory for load. This computer does not have enough memory to open 'file name' in autodesk revit architecture 2012. Increase the available memory or contact Autodesk support for more information.
We are working on Windows XP SP3 with 3.23gb RAM. Now normally it would be as simple as upgrading the RAM on this machine to 4GB as specified in the system requirements for 2012, but a previous computer I was testing with only 2GB RAM was able to open these files without any issues (despite being a little slower).
The only difference I can see at this stage is the 3GB switch is enables in the 2gb machine.
View 1 Replies
ADVERTISEMENT
Oct 7, 2013
I got “Insufficient Memory” error messages in working on the job needed large files ( > 100MB) with AI 5.5 in office with below #1 PC spec. Error message starts to happen after working 15min to 1 hour depends on the file. I need to restart computer in each “Insufficient Memory” error message pop-up (otherwise the messages will continue to pop-up). Sometimes the file can’t be saved after the error message occurred.
I have never encountered this memory issue at my home with below #2 Mac spec.#1 PC spec looks better than #2 Mac spec. Why PC can’t perform like Mac does? Do you have any solution to fix the “insufficient Memory” issue in #1 PC spec? I had already reset the AI preference as the following link but it doesn’t work. URL...
View 1 Replies
View Related
Mar 17, 2011
I use Illustrator CS 5 and am working with a large image. Problem is, when I sometimes try to save my Illustrator file as a joeg I get the dreaded "Insufficient memory was available to complete the operation" error message. It doesn't happen every time BUT when it does its a pain because I have to close all my programs and restart my computer.
View 2 Replies
View Related
Jul 6, 2009
My project in AI CS4 (WinXP) is not able to place (import) a 600dpi image (size is 35mb). The error message says "Insufficient Memory was Available to Complete the Operation". The same image at 300 dpi worked where the 600 did not work. There is 3gb of RAM on my machine. I am wondering if there is a problem with AI here, and if there is a way to allocate more memory to the program. I don't mind using the 300-resolution image, but would like to learn something about Illustrator from this issue. Is there a way to fix the problem or to adjust the memory usage in Illustrator CS4?
View 17 Replies
View Related
Nov 7, 2002
where im trying to do a starburst, and im trying to polar coordinate...after i click it, it says "insufficient free memory".
View 4 Replies
View Related
Mar 4, 2013
Why I am getting a "insufficient memory" error 15036:0:0 when trying to select certain filters such as "Auto-Exposure" and "Brightness & Contrast"? Other filters can be selected without getting this error.
I am running W7 64 bit.
View 4 Replies
View Related
Dec 13, 2013
while working suddenly everything disappears from the monitor freezing and the file can not' be saved or recovered. The message that appears is insufficient memory. It 'a problem that often appears when I use the text or any changes to the text.
Coreldraw is a 32 Bit Windows xp professional and my pc has 3 GB RAM Intel Core Duo CPU E7400 I can't resolve this problem until now.
View 11 Replies
View Related
Jan 29, 2014
I have placed showers within various apartments. These apartments are groups. I have made a change to the family, (realigned a reference plane to be equal between two points). Now I reload the family into the project and no matter what I try, I cannot load it into the project without getting the ungroup error.
Prior to the warning, it states i need to delete a number of dimension references. Which I allow, then the group error appears telling me I still have constraint problems.
I thought it would be fine to dimension to families in groups, but it appears their is the potential for problems.
View 2 Replies
View Related
Nov 4, 2011
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
View 16 Replies
View Related
Dec 20, 2012
I've got a closed traverse that has all the elements, but when I try and analyze it, I get the dreaded error: Insufficient angles, distances or points to calculate this loop. Creating a Traverse for Adjustment: [URL]l and my screen capture looks very similar to his, but I'm not getting any results.
View 9 Replies
View Related
Jun 1, 2012
A error has popped up saying:
Could not complete your request becasue there is not enough memory (RAM).
View 7 Replies
View Related
Mar 19, 2013
Machine Spec :-
Machine :-- Windows 7 Pro 32 bit
CPU : -- 1 x Pentium Dual-Core CPU E5500 @ 2.80GHz (2792 MHz)
Motherboard :-- DG41WV
RAM :-- 4 GB DDR3
Videoadapter :-- Intel(R) G41 Express Chipset (1024 MB)
Hard Disk :-- C drive free space 23.8 out of 43.9
D drive free space 39.8 out of 48.8
E drive free space 37.6 out of 48.8
F drive free space 71.1 out of 91.2
Problem :-- When using the Mixer Brush tool,the photoshop stop responding and showing error.
Error Massage :-- "Could not use the Mixer Brush tool because there is not enough memory(RAM)"
View 4 Replies
View Related
Jun 17, 2013
Just installed CS6 about a month ago and at different points of taxing the program and my system and on various tools or events in Photoshop, I get an error that tells me there is not enough ram to complete the task.
I'm using CS6 Extended 64-bit and my comp specs are:
Windows 7 Pro
16 gigs of DDR3 memory
Intel i-7 second gen chip
ATI Radeon 5500 with 2 gigs onboard memory
And all of my stuff is up to date - including PS. I've allocated 75% of the system memory to PS in the preferences.
View 9 Replies
View Related
Aug 1, 2008
when I am converting RAW images via CS3 - ACR, I get the message "Not Enough Memory"
This happens when I try to convert more than 25 or so images during one Photoshop session. If I close down Photoshop and then reopen the program I can usually convert another 25 or so images before getting the message again. When I used CS2, I would be able to convert 100 or so RAW images with no problems.
I am not sure what to do.
My system is a Dell XPS with an Intel Core 2 Quad, with 4GB of ram.
View 39 Replies
View Related
Nov 8, 2007
I have given 80% (or 1.270 Gigs) of RAM to PS CS3 Extended. Everything works well until I use the new "Quick Selection Tool (W)." Whenever I use it, I get the message, "Could not complete your request because there is not enough memory (RAM)." The "Magic Wand" and all the other tools work great.
This happens regardless of what else is happening on the computer. Usually only PS and PS Bridge are the only apps open. And it doesn't matter how many images are open. I'm running Windows XP.
View 4 Replies
View Related
Feb 27, 2005
I am using CS and just recently ran into an error that is starting to frustrate me. I just upgraded from a P4 2.4 with 512mb of RDRAM to a P4 3.4 with 1024mb of DDR2 SDRAM. I never had this problem before, but I'm trying to filter>distort and I keep running into "not enough sufficient ram" errors. i closed all my other running programs and tried again. same error. so, i restarted the computer and ran PS again only to have the same problem. The picture is 8.5x11 at 500dpi. I increased the memory allowance from 50% to 70% and added more space for the scratch disc and still nothing. Whats going on? Isnt 1GB ram enough or do I need more?
View 9 Replies
View Related
Oct 18, 2004
i'm using photoshop CS, when i try pasting an image from other apps like macromedia fireworks, i will receive an error, not enough memory (RAM) . however, i have more than 200MB of free memory stated in my task manager. I find this very weird, i have check other setttings in photoshop, they're in default settings. i have tried to allocate more memory to photoshop, but nothing work!
View 1 Replies
View Related
Apr 16, 2012
I was working and rendering in the program and it was working just fine, then just today i was rendering and i got "out of memory error" and it stopped working and just closed. I restarted the program and when i selected an object it just stopped working again and i got the out of memory error again. I have about 200 GB free space so i don't know whats wrong, I'm running Windows 7 32bit.
View 7 Replies
View Related
May 25, 2011
How is it possible for Mental Ray to give me an out of memory error on a Windows 7 professional 64-bit machine using the 64-bit Max Design? I have 4GB of physical memory, but whenever a program needs more memory Windows allocates virtual memory to it, so theoretically my memory limit should be my hard drive space. However, when I try to render my scene with a little less than 200k polys with a displacement map on it (trying to get grass), the task manager shows 3dsmax.exe using up to 4.3GB of commit memory (4gb working memory), then it crashes.
I've set Windows to use up to 16gb for my pagefile, so it seems like mental ray isn't actually 64-bit since it crashes right at the 4gb limit of a 32-bit program.
EB42
Win7 64bit
4GB ram
500gb 10k rpm hdd
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
View 8 Replies
View Related
Apr 13, 2012
Giving me 'insufficient memory was available to complete the operation' when trying to place and image (jpg ~23mb) inside a .ai file which is just a few KB large.
Laptop has 6GB physical RAM and 1GB virtual RAM.
View 10 Replies
View Related
Jan 16, 2013
i have downloaded the trial version to test ps.when i click save it exits Photoshop..and after about 15 minutes a error comes up and it says "memory could not read"
View 5 Replies
View Related
Aug 15, 2013
I am Using Adobe Photoshop CS3 Version 10.0 and I keep getting the error "Not enough Scratch memory available to perform this action" whenever I try to Save a .psd file to a .jpg/.jpeg file.
I did go to Edit -> Preferences -> Performance, and add my other two partitions as scratch disks, also put up my E: drive as the primary scratch disk on the top of the list (Which has 80GB's of space) but I still keep getting this error.
My file (the .psd that i am trying to save to a .jpg) has a total size of 56MB and 300dpi with 4 or 5 layers in it and the target jpg file is supposed to be 12inches by 20inches.
Some other things I have tried is celaring the %temp% folder, Defragmenting my Hard Drive(s), Disk Cleanup, set my System Page file to 4GB, but all this is of no use.I know that I have enough RAM and Hard disk space.
does the type of RAM and Processor you are using effect this? I have a DDR RAM.. 2GB, I know its outdated, its our office computer I am working on.. My Processor is a Core 2 Duo which isnt bad.
View 6 Replies
View Related
Sep 2, 2008
i had CS3 running fine for as long as i can remember.. (on winxp pro sp3 32bit)
then all of a sudden today when i try to start it.. it opens and the splash screen comes up, then when it gets to 'initializing palettes' i get an error that says etc etc memory cannot be read...
i uninstalled, ran the cleaner, deleted all cs3 folders in docs&settings.. reinstalled.. same problem ...
View 4 Replies
View Related
Mar 19, 2009
I have an HP Pavilion 730. I have purchased the upgrade to CS4 and it has been working for a while. Now all of a sudden, when I open the program, the computer goes "boink" and a message comes up that says:
The instruction at "Ox77e78804" referenced memory at "0x0at1a1470". The memory could not be written. Click OK to terminate or click cancel to debug program.
No matter which one I do, it shuts down CS4 totally?
I have uninstalled the program and reinstalled it and it still does the same thing.
View 1 Replies
View Related
Jun 27, 2008
I previously used PS CS on XP Pro and all was fine. I then upgraded to Vista. Since I reverted back to XP Pro I keep getting error messages.
When I use the 'Open as' command, I get:
"Could not complete your request because it is not a valid Photoshop document" (yet it's a JPG) - works ok if I just usen File >Open.
When I try and shut/close down the file/program, I get:
"Could not complete the Close command becuase there is not enough memory (RAM)"
Strangley enought these messages then just disappear. Really stuggling to use this software due to the annoying pop up messages.
View 3 Replies
View Related
Jul 7, 2010
Could not complete this operation. There is not enough scratch memory available.when trying to save for web. The content has a lot of linked images, around 1000x1000 px each, used with clipping masks, drop shadows and glows at 300dpi.I realize that this might be hard to flatten for JPEG and I'd be fine with long processing times (which I get) but out of memory?.
Those are all gigabytes, not megabytes, no mistake. There's NO WAY that there's not enough scratch memory available.And this is how the process looks; Physical memory usage at this point is 62%, Commit charge - 15%.
Currently, I can work around this by making a screenshot of "Original" tab in Save for Web dialogue when it's there - because sometimes it's just a pink-filled window.
View 12 Replies
View Related
Dec 23, 2013
I have a early 2011 MBP with 8GB of ram.
View 8 Replies
View Related
Jul 16, 2012
I just got the attached error message when trying to exit a sketch that I was editing. Windows says I have 11Gb available so there must be a problem with Inventor. I am now stuck with no way to edit the sketch without getting this error. It's a part that was migrated from 2011 format using task scheduler. Using 2012 SP2
View 1 Replies
View Related
Nov 9, 2008
While working on a complex project with PSCS4 that involved copying and pasting from numerous open documents, I have been receiving an error message shown in the link. PS then shuts down with loss of my data.
I'm running Windows XP Pro with a dual Xeon processor workstation with 2GB of error correcting memory. PS3 and other applications have been working properly.
Any suggestions other than going back to PS3?
View 3 Replies
View Related
Dec 17, 2008
I recently installed CS4 and when I quit Photoshop CS4 I get a "DDE Server... memory could not be 'read'" error. I've looked all over the forums for solutions to this, tried deleting my preferences file, reinstalling CS4, and fiddling with performance options, but nothing seems to make a change. I never had much trouble with CS2 or CS3.
View 9 Replies
View Related
Feb 29, 2008
We have Photoshop CS2 running on Windows XP SP2 machine with 3 GB memory. Whenever we try to open illustrator CS3 file in Photoshop get following error message:
"Could not complete your request because there is not enough memory(RAM)".
We used to be able to do this without any problems untill I upgraded the memory from 2 GB to 3 GB. Dell technician came and changed the memory chips on the PC still get the same message. I went into performance monitor and not much memory is in use when this error comes up. Tried opening just one application at a time too.
Is there any patch that I need to install on the PC.
View 1 Replies
View Related
