My project in AI CS4 (WinXP) is not able to place (import) a 600dpi image (size is 35mb). The error message says "Insufficient Memory was Available to Complete the Operation". The same image at 300 dpi worked where the 600 did not work. There is 3gb of RAM on my machine. I am wondering if there is a problem with AI here, and if there is a way to allocate more memory to the program. I don't mind using the 300-resolution image, but would like to learn something about Illustrator from this issue. Is there a way to fix the problem or to adjust the memory usage in Illustrator CS4?
I got “Insufficient Memory” error messages in working on the job needed large files ( > 100MB) with AI 5.5 in office with below #1 PC spec. Error message starts to happen after working 15min to 1 hour depends on the file. I need to restart computer in each “Insufficient Memory” error message pop-up (otherwise the messages will continue to pop-up). Sometimes the file can’t be saved after the error message occurred.
I have never encountered this memory issue at my home with below #2 Mac spec.#1 PC spec looks better than #2 Mac spec. Why PC can’t perform like Mac does? Do you have any solution to fix the “insufficient Memory” issue in #1 PC spec? I had already reset the AI preference as the following link but it doesn’t work. URL...
I use Illustrator CS 5 and am working with a large image. Problem is, when I sometimes try to save my Illustrator file as a joeg I get the dreaded "Insufficient memory was available to complete the operation" error message. It doesn't happen every time BUT when it does its a pain because I have to close all my programs and restart my computer.
Why I am getting a "insufficient memory" error 15036:0:0 when trying to select certain filters such as "Auto-Exposure" and "Brightness & Contrast"? Other filters can be selected without getting this error.
I am having a problem opening some larger revit models (100MB plus) in revit 2012 I will receive a message saying:
Insufficient memory for load. This computer does not have enough memory to open 'file name' in autodesk revit architecture 2012. Increase the available memory or contact Autodesk support for more information.
We are working on Windows XP SP3 with 3.23gb RAM. Now normally it would be as simple as upgrading the RAM on this machine to 4GB as specified in the system requirements for 2012, but a previous computer I was testing with only 2GB RAM was able to open these files without any issues (despite being a little slower).
The only difference I can see at this stage is the 3GB switch is enables in the 2gb machine.
while working suddenly everything disappears from the monitor freezing and the file can not' be saved or recovered. The message that appears is insufficient memory. It 'a problem that often appears when I use the text or any changes to the text.
Coreldraw is a 32 Bit Windows xp professional and my pc has 3 GB RAM Intel Core Duo CPU E7400 I can't resolve this problem until now.
I have Lightroom v. 4.1. In the process to update to v. 4.2, I receive a message that disk space is insufficient. There is over 500 GB on the hard drive. The update is halted at this time. I am using a Mac, OS Lion.
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Using VS 9 to create an 82 minute project I'm trying to export it as an AVI file. At the end of the rendering process I get the message "insufficient space". I've tried twice, once on C drive which shows 340GB unused and also on an external drive that shows 196GB unused.
I've noticed that on the timeline the clips total 1hr 22min but there is then a long empty portion that goes to 3hr 10min.
I am trying to save as a psd file from illustrator to imoprt it into photshop and take it from there. I have made more than 100 layers and when i try to save as 300 dpi keeping and the layers as well given an option from the dialogue box.
I get a error message not enough memory to save the file. Why does it not save? My laptop has enough memory for another 4 pcs.
Giving me 'insufficient memory was available to complete the operation' when trying to place and image (jpg ~23mb) inside a .ai file which is just a few KB large.
illustrator CS4 "out of memory" exporting to PSD.settings to write layers at 300 dpi.worked fine a week ago, suddenly no memory? even tried with a 3 inch square and it would not export to Photoshop.
Works fine in CS6, but I don't always have access to CS6.
I get this error message every once and a while when it changes to outlines and I try to switch back to preview mode. I just added 16gb to my hard drive this month so there should be any issue of memory space on my computer.
Could not complete this operation. There is not enough scratch memory available.when trying to save for web. The content has a lot of linked images, around 1000x1000 px each, used with clipping masks, drop shadows and glows at 300dpi.I realize that this might be hard to flatten for JPEG and I'd be fine with long processing times (which I get) but out of memory?.
Those are all gigabytes, not megabytes, no mistake. There's NO WAY that there's not enough scratch memory available.And this is how the process looks; Physical memory usage at this point is 62%, Commit charge - 15%.
Currently, I can work around this by making a screenshot of "Original" tab in Save for Web dialogue when it's there - because sometimes it's just a pink-filled window.
I am getting this message when I try and export an AI file as .psd file. Illustrator is the only app open on a new 24" iMac running 10.5.4. The illustrator file itself is only about 5 mb. Yet . . .I get the message "Not enough memory to save file."
I have Illustrator CS5. HP workstation with an intel xeon cpu. 64 bit 12 GB of RAM.
I never had this problem before, but in the past few days this message keeps coming up, and converts the files to outline mode. It's happening to all kinds of illustrator files ranging is size from 2MB to 56MB, from simple drawings with gradient fills, to complex drawings with mesh. In most of the files, I'm working with vector images that I didn't create, but purchased from stock photo sites.
i keep getting the error message "Not enough Memory was available or an object was too complex" . . it's a small file and i have a new computer and this was happening on my old computer ?
I am trying to save an illustrator EPS file to a High Quality PDF file
I have a scenario where i have to load the font(ttf files) into the memory and apply it to all the selected textframe in the active document. So for loading the font i am using 'AddFontResourceEx()' api.
The problem is this, when i used this api it will not load the font at the same time, it will take some time to load the font. But the plugin will try to apply that font to the text frame. Sometimes font will apply somtimes not.Also is there any api through which we can refresh font list?
I'm experiencing difficulties in exporting website from .AI to .PSD using Illustrator CS5.1 under Windows7 Home Premium 64bit. The error message says "Not enough memory to save the file".
I can assure you that i've got enough memory for scratch disks and my computer is powerful enough to handle this operation. The funny thing is that i am able to export the very same .Ai file using Illustrator CS5.1 under Windows XP 32bit on different PC.
I've tried to find a solution online, but it gave no satisfying results so far. So, i think the problem comes from the operating system, but i don't know how to fix it...
I've got a closed traverse that has all the elements, but when I try and analyze it, I get the dreaded error: Insufficient angles, distances or points to calculate this loop. Creating a Traverse for Adjustment: [URL]l and my screen capture looks very similar to his, but I'm not getting any results.
I have just installed Illustrator 9.0, running on Windows 7. The install was fine but when I try to launch the program I receive the following 2 errors:
1) "Pencil or smooth tool out of memory. Try editing at a smaller zoom magnification".I click OK because that's the only option. The next error window occurs with:
2) "The filter cannot complete because of an unknown error" Error: IMEM.I click ok again because that's the only option.
when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
Just upgraded to 32gigs vs the 16 I had and it's working, tested with system reporting programs, etc. And They all show the 32gigs of memory. Went into PS to preferences to change memory usage by PS and it still only shows 14769 of available memory.
Do I need to reinstall PS or what to get it to see the new memory total?
I have an HP Pavilion 730. I have purchased the upgrade to CS4 and it has been working for a while. Now all of a sudden, when I open the program, the computer goes "boink" and a message comes up that says:
The instruction at "Ox77e78804" referenced memory at "0x0at1a1470". The memory could not be written. Click OK to terminate or click cancel to debug program. No matter which one I do, it shuts down CS4 totally?
I have been working on a large group of DNG's and I'm noticing that as I proceed through the edits my computer memory seems to be 'not releasing'. Example: Select photo, process it in RAW, open it in Photoshop CS3, edit, save and CLOSE the image. My computer memory does not seem to be refreshed when I close the image and eventually, after several images, I have to close the application to retrieve the memory. I am running on a PC Vista with 3 gig of memory (max my operating system will work with).
I made a javascript which has to convert and edit 18000 PDF's (pages) to arround 103.000 small images. I use ExtendScript Toolkit 2 to load a small file with all the file locations. Then each file will be opened and edited (one by one). This works fine and there are no real peaks in memory usage.
I let photoshop use arround 1500MB from the 1600 available RAM (Preferences -> Performance). I've never seen the whole system use more then 1200MB (2000MB available).
Despite that there is enough memory, the script stops working with the text "General photoshop error occurred ... this functionality because there is not enough memory (RAM)" in the status bar from ExtendScript. When I restart the script, it will continue where it stopped and the next file will be converted without a problem.
The PDF file is not the problem and memory usage in general is not a problem.
I have an HP Pavilion 730. I have purchased the upgrade to CS4 and it has been working for a while. Now all of a sudden, when I open the program, the computer goes "boink" and a message comes up that says:
The instruction at "Ox77e78804" referenced memory at "0x0at1a1470". The memory could not be written. Click OK to terminate or click cancel to debug program. No matter which one I do, it shuts down CS4 totally?
I've got a Core2Duo Dell with 4GB of RAM running 32 bit XP Pro. My copy of CS3 sees about half of that RAM. I understand there is a "switch" in XP's Boot.ini that allows PS to read more then the 2GB.
I've read the above MS page & I can't figure out what to do.
