I am trying to save as a psd file from illustrator to imoprt it into photshop and take it from there. I have made more than 100 layers and when i try to save as 300 dpi keeping and the layers as well given an option from the dialogue box.
I get a error message not enough memory to save the file. Why does it not save? My laptop has enough memory for another 4 pcs.
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies View RelatedI do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
Giving me 'insufficient memory was available to complete the operation' when trying to place and image (jpg ~23mb) inside a .ai file which is just a few KB large.
Laptop has 6GB physical RAM and 1GB virtual RAM.
My project in AI CS4 (WinXP) is not able to place (import) a 600dpi image (size is 35mb). The error message says "Insufficient Memory was Available to Complete the Operation". The same image at 300 dpi worked where the 600 did not work. There is 3gb of RAM on my machine. I am wondering if there is a problem with AI here, and if there is a way to allocate more memory to the program. I don't mind using the 300-resolution image, but would like to learn something about Illustrator from this issue. Is there a way to fix the problem or to adjust the memory usage in Illustrator CS4?
View 17 Replies View Relatedillustrator CS4 "out of memory" exporting to PSD.settings to write layers at 300 dpi.worked fine a week ago, suddenly no memory? even tried with a 3 inch square and it would not export to Photoshop.
Works fine in CS6, but I don't always have access to CS6.
I get this error message every once and a while when it changes to outlines and I try to switch back to preview mode. I just added 16gb to my hard drive this month so there should be any issue of memory space on my computer.
View 4 Replies View RelatedCould not complete this operation. There is not enough scratch memory available.when trying to save for web. The content has a lot of linked images, around 1000x1000 px each, used with clipping masks, drop shadows and glows at 300dpi.I realize that this might be hard to flatten for JPEG and I'd be fine with long processing times (which I get) but out of memory?.
Those are all gigabytes, not megabytes, no mistake. There's NO WAY that there's not enough scratch memory available.And this is how the process looks; Physical memory usage at this point is 62%, Commit charge - 15%.
Currently, I can work around this by making a screenshot of "Original" tab in Save for Web dialogue when it's there - because sometimes it's just a pink-filled window.
I am getting this message when I try and export an AI file as .psd file. Illustrator is the only app open on a new 24" iMac running 10.5.4. The illustrator file itself is only about 5 mb. Yet . . .I get the message "Not enough memory to save file."
View 31 Replies View RelatedI have Illustrator CS5.
HP workstation with an intel xeon cpu. 64 bit
12 GB of RAM.
I never had this problem before, but in the past few days this message keeps coming up, and converts the files to outline mode. It's happening to all kinds of illustrator files ranging is size from 2MB to 56MB, from simple drawings with gradient fills, to complex drawings with mesh. In most of the files, I'm working with vector images that I didn't create, but purchased from stock photo sites.
i keep getting the error message "Not enough Memory was available or an object was too complex" . . it's a small file and i have a new computer and this was happening on my old computer ?
I am trying to save an illustrator EPS file to a High Quality PDF file
I have a scenario where i have to load the font(ttf files) into the memory and apply it to all the selected textframe in the active document. So for loading the font i am using 'AddFontResourceEx()' api.
The problem is this, when i used this api it will not load the font at the same time, it will take some time to load the font. But the plugin will try to apply that font to the text frame. Sometimes font will apply somtimes not.Also is there any api through which we can refresh font list?
I got “Insufficient Memory” error messages in working on the job needed large files ( > 100MB) with AI 5.5 in office with below #1 PC spec. Error message starts to happen after working 15min to 1 hour depends on the file. I need to restart computer in each “Insufficient Memory” error message pop-up (otherwise the messages will continue to pop-up). Sometimes the file can’t be saved after the error message occurred.
I have never encountered this memory issue at my home with below #2 Mac spec.#1 PC spec looks better than #2 Mac spec. Why PC can’t perform like Mac does? Do you have any solution to fix the “insufficient Memory” issue in #1 PC spec? I had already reset the AI preference as the following link but it doesn’t work. URL...
I am new to illustrator and am trying to export a high res image and its saying not enough memory?
View 4 Replies View RelatedI'm experiencing difficulties in exporting website from .AI to .PSD using Illustrator CS5.1 under Windows7 Home Premium 64bit. The error message says "Not enough memory to save the file".
I can assure you that i've got enough memory for scratch disks and my computer is powerful enough to handle this operation. The funny thing is that i am able to export the very same .Ai file using Illustrator CS5.1 under Windows XP 32bit on different PC.
I've tried to find a solution online, but it gave no satisfying results so far. So, i think the problem comes from the operating system, but i don't know how to fix it...
I use Illustrator CS 5 and am working with a large image. Problem is, when I sometimes try to save my Illustrator file as a joeg I get the dreaded "Insufficient memory was available to complete the operation" error message. It doesn't happen every time BUT when it does its a pain because I have to close all my programs and restart my computer.
View 2 Replies View RelatedI have just installed Illustrator 9.0, running on Windows 7. The install was fine but when I try to launch the program I receive the following 2 errors:
1) "Pencil or smooth tool out of memory. Try editing at a smaller zoom magnification".I click OK because that's the only option. The next error window occurs with:
2) "The filter cannot complete because of an unknown error" Error: IMEM.I click ok again because that's the only option.
Then the program crashes and I have to exit.
when I try to open an existing file or create a new one -- the application will shut down unexpectedly and without warning.But I also experience application errors: 'Instruction at "0x1a3c4b6b" referenced at memory "0x00000028" Memory could not be read.
View 9 Replies View RelatedHow can I save a PDF in CS6 and open in CS5 and still have editing capabilities?
View 1 Replies View RelatedWhen I try to save a pdf from Illustrator, it crashes. I have CS5. It doesn't matter which settings I choose in the dialog box, it always shuts down illustrator and says Adobe Illustrator has stopped working....
View 4 Replies View RelatedI became a member of Adobe Creative Cloud a few days ago. Today I started working in Illustrator CC, but it really bothers me that everytime I save my doccument it crashes.Well, at least, it says that it crashes, but if I wait a couple of minutes it works again and it saved my procress.
Also when I close the program and open it again, it already crashes before I have done anything.
I am working on a Windows 7 computer, and with Illustrator CS6 I didn't had this problem at all.
The files i'm saving for web so i can get them in jpg (or gif) format are coming out very pixelated. this is when i print the image.
what is the best way to save for web an image and keep the resolution good.
using for a business card template. Every template will let me attach images i want to the project. to do this.. i "get file from computer" and it drops the image in but real small... then you are supposed to enlarge it onto your work however you want. well when i enlarge this image file, it gets pixelated badly. I'm thinking it's the way i'm saving it. i do not adjust anything when i save. maybe i should.
this is what avery template notes about the images i am allowed to use - When uploading the image, the maximum size allowed is 4 MB. You can only upload JPG and PNG images either as RGB or CMYK.
I'm trying to upload shirt designs to jakprints and I'm using the template they provided to design the shirt. Hoever, when I save the file, only my design is left. No template.
When opened, it should look like this:
but instead it looks like this:
So a few times now I have gone to save a document and illustrator cs6 64 bit crashes. It doesn't outright close, but it stops responding to windows and all of the pallate windows and main window begin to flash black and then back to regular.
I run windows 8 on this computer and am worried that it just incompatible for the os. So I have begun to run the program in windows 7 compatability mode. For the last 20 minutes it hasn't crashed out, but I've only saved two documents and this error has only happend three times in a month of using the application, though two of those times were within an hour of each other today.
I'm not 100% certain but I believe that each file it has happend on is also one that I had just saved for web.I found as much of a crash log as I can in this new os but it reads as follows:
The program Illustrator.exe version 16.0.3.691 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1110
Start Time: 01cdd7e0adea99a9
Termination Time: 322
Application Path: C:Program FilesAdobeAdobe Illustrator CS6 (64 Bit)Support FilesContentsWindowsIllustrator.exe
Report Id: 9856d88b-43df-11e2-be73-10bf48b5fe20
Faulting package full name:
Faulting package-relative application ID:
I'm not really very familiar with the action center control panel but I couldn't find any additional information there.
I'm finding that when i add a second artboard to an existing ai, then save and close, it has disappeared on reopening.
I have both pieces of artwork (one for each page), but 1 of the artboards will have disappeared. Irritatingly the remaining artboard sits between the 2 pieces of artwork - in the wrong position for both!!!
I am running a fully licensed pro version of Illustrator CS6 on two machines. They both now crash (freeze) when saving EPS. Fine on PDF, Ai, etc... just EPS on both machines. No error messages, just a freeze then a force quite.
Both machines are 27in iMacs, under one year old, latest versions of Mountain Lion, all top notch and running on i7 & i5 processors. Spec is not the problem. All software is updated.
Really at a loose end. Reinstalled the software on one machine, OK at first, then back to crashing.
AI6 is very slow on some saves. Nothing fancy with this file. No gradients, no clipping masks, no placed images, simply color line art. I run a Mac Pro with 16Gb ram and Tb raid drives . I've had this problem with a few other files and I think in CS5.
View 3 Replies View RelatedMy illustrator is crashing on saving files.I thought it was issue with network. i copied files to desktop and still it crashes.event log is :
Faulting application name: Illustrator.exe, version: 15.0.2.399, time stamp: 0x4ce0f2fc
Faulting module name: AGM.dll, version: 4.20.69.9418, time stamp: 0x4c296457
Exception code: 0xc0000005
Fault offset: 0x00240f9d
Faulting process id: 0x1624
[code]....
I have a problem with Illustrator CS6.When I try to save in .ai or other format, I have a Windows error message like "Illustrator has stopped working".And Illustrator close it.
View 8 Replies View RelatedI can't save for web to SVG format from illustrator CS6. The option isn't in the format list of the save for web dialogue; I only have gif, jpeg, png-8 and png-24. I am sure it used to be there, so where has it gone?
Have I got to do something in the process of setting up a new document?
I am a graphic design student in college in my last semester and I have many projects invovling Illustrator I need to get done. Since a few weeks ago, both my Illustrator CS6 and CC have been crashing only when I save my progress. I have since uninstalled the CS6 and only have the CC version, but I go to save anything and it tells me Illustrator has stopped working and shuts down every time. I need these projects saved for Monday.
View 11 Replies View Related