Illustrator :: Closing CS6 When Saving
Sep 19, 2012I have a problem with Illustrator CS6.When I try to save in .ai or other format, I have a Windows error message like "Illustrator has stopped working".And Illustrator close it.
View 8 Replies
ADVERTISEMENT
Photoshop :: No Ask For Saving When Closing?
Jul 22, 2013I had this issue twice already when closing files without saving expecting to ask me what to do with the file of course. But it didn't ask a thing.
View 4 Replies View RelatedPhotoshop Elements :: Closing And Saving Files?
Nov 2, 2012In preparing photos imported from iphoto for a book, I've learned how to change the ppi and format, but when I try to move on I find I don't know how to save and close out of editing a photo. The photos either have red "edit in progress" bands, or multiple copies, or both.
I don't know where to save them, either.
GIMP :: Paths Disappear After Saving And Closing A File?
Jan 6, 2011I started using GIMP on a PC a couple of months ago after developing skills in PS over the years on my Macs at home and at work.
I like GIMP and it's stable nature along with everything else... in addition to allot of standard photo editing and graphics creation, I recently used it for some of the animation filters, which are nice.
The only problem I'm having is that when I create a path, or multiple paths, and have them in the paths palette, after I save and close the file that contains the paths, the next time I open that file my paths are gone... completely disappeared.
AutoCAD 2013 :: Saving Automatically When Closing File?
Apr 12, 2013AutoCAD 2013, 60-90 days into it, upgraded from 2007.
I have 2 of 4 workstations with this issue, AutoCAD will automtically save the file when the files is closed, w/o any prompts to verify of we want to saved or not.
I have my Options|Autosave turned off, but this should not affect the save on close it should only create a continual ac$ backup file.
This is now the 2nd time this has occured. In early March we noticed this and in dealing with AutoCAD (Suscription Service) we finally deceided to restore AutoCAD to factory defaults, which did fix the issue at the time. However it also meant that I needed to retore all the pathways and our standards. Once completed, I paid particular attention to ensuring that AutoCAD was NOT saving the file on close and it was doing so up until earlier this week, when I noticed it SAVING on close again.
Now most of you might think, hey thats a good thing, however, we routinely will test modifications to our layouts on our working files, but dont want to actually modify those files and then we would simply close the drawing w/o saving thus ensuring that those mods were not saved.
In March, both 2007 & 2013 did this, however only my 2013 is affected now.
AutoCAD Inventor :: Closing Active File Without Saving?
Mar 27, 2013Trying to create a bit of code that when the 'OnNew Document' event is fired the code checks for a particular Custom Property. Depending on what the Custom Property is set to a form is then fired with relevant text to point the user to a specific area in the workspace. Al this works ok.
But if they press cancel i need the code close the activate 'Part1' which inturn then allows the user to select 'New' to begin again.
I have tried various scenarios but the main problem is that Inventor then crashes!
PublicSub applicationEvents_OnNewDocument(DocumentObject As Inventor._Document, BeforeOrAfter As Inventor.EventTimingEnum, Context As Inventor.NameValueMap, ByRef HandlingCode As Inventor.HandlingCodeEnum) Handles applicationEvents.OnNewDocument
[Code]....
CorelDRAW Graphics Suite X5 :: Corrupted CDR - File Won't Open After Saving And Closing It?
Mar 11, 2012I know this happens sometimes when a file won't open after saving and closing it. Usually I can open the backup file with just some lost work, but not this time. Problem is this time it happened with a file I spend a long time working on. I tried unzipping and opening riffData.cdr with no luck. I've uploaded the file. It is a complex drawing with over 20 pages including vector and bitmap objects.
[URL]
AutoCAD Architecture :: Mtext Column Width - Placement Changing After Saving / Closing File
May 2, 2011I've been having this issue happen repeatedly, but not consistently. In a new file, I adjust the width of an mtext box so that the text wraps into multiple lines. When I next open the file, all mtext boxes are back at a wider width so that the text is all on one line. The start of the text is also usually in a different location. This was happening on 2011/XP and now on 2012/Windows7.
View 5 Replies View RelatedIllustrator :: After Viewing And Closing File In AI - Can Delete It But Not Its Folder
Sep 13, 2012I’m going through a bunch of old files to see what I can git rid of.
After I view and then close a file in Illustrator CS6 I can delete the file, but not its containing folder, which stays locked, even after closing Illustrator. Restarting and closing Illustrator again usually enables me to delete the folder — but not always. Sometimes I have to close everything and log out and back in to be able to delete the folder. (BTW, Acrobat and Photoshop also share this problem.)
When you have, as I do, hundreds of files to go through, this becomes a real hassle.
Illustrator :: Why Can't Files Opened From AI CC Created In AI CS4 Be Reopened After Closing Window
Jun 22, 2013Why can't files opened from AI CC created in AI CS4 be reopened after closing the window?–They reopen only if you quit and relaunch AI CC. Why can't anything be copied or pasted from keyboard commands or drop down menu open in AI CC? Why can't a new window be created in AI CC–only receive error code ID-1(Can't create a new illustration. Problems occurred while saving the print file.).
View 2 Replies View RelatedIllustrator :: Saving A PDF In CS6 Opening In CS5?
Jul 20, 2012How can I save a PDF in CS6 and open in CS5 and still have editing capabilities?
View 1 Replies View RelatedIllustrator :: Crashes When Saving To PDF?
Nov 18, 2012When I try to save a pdf from Illustrator, it crashes. I have CS5. It doesn't matter which settings I choose in the dialog box, it always shuts down illustrator and says Adobe Illustrator has stopped working....
View 4 Replies View RelatedIllustrator :: CC Crashes When Saving?
Sep 6, 2013I became a member of Adobe Creative Cloud a few days ago. Today I started working in Illustrator CC, but it really bothers me that everytime I save my doccument it crashes.Well, at least, it says that it crashes, but if I wait a couple of minutes it works again and it saved my procress.
Also when I close the program and open it again, it already crashes before I have done anything.
I am working on a Windows 7 computer, and with Illustrator CS6 I didn't had this problem at all.
Illustrator :: Saving As PSD Not Enough Memory
Apr 28, 2012I am trying to save as a psd file from illustrator to imoprt it into photshop and take it from there. I have made more than 100 layers and when i try to save as 300 dpi keeping and the layers as well given an option from the dialogue box.
I get a error message not enough memory to save the file. Why does it not save? My laptop has enough memory for another 4 pcs.
Illustrator :: How To Keep High Res When Saving For Web
Apr 12, 2013The files i'm saving for web so i can get them in jpg (or gif) format are coming out very pixelated. this is when i print the image.
what is the best way to save for web an image and keep the resolution good.
using for a business card template. Every template will let me attach images i want to the project. to do this.. i "get file from computer" and it drops the image in but real small... then you are supposed to enlarge it onto your work however you want. well when i enlarge this image file, it gets pixelated badly. I'm thinking it's the way i'm saving it. i do not adjust anything when i save. maybe i should.
this is what avery template notes about the images i am allowed to use - When uploading the image, the maximum size allowed is 4 MB. You can only upload JPG and PNG images either as RGB or CMYK.
Illustrator :: Why Is Template Not Saving
Mar 21, 2014I'm trying to upload shirt designs to jakprints and I'm using the template they provided to design the shirt. Hoever, when I save the file, only my design is left. No template.
When opened, it should look like this:
but instead it looks like this:
Illustrator :: Crashes When Saving
Dec 11, 2012So a few times now I have gone to save a document and illustrator cs6 64 bit crashes. It doesn't outright close, but it stops responding to windows and all of the pallate windows and main window begin to flash black and then back to regular.
I run windows 8 on this computer and am worried that it just incompatible for the os. So I have begun to run the program in windows 7 compatability mode. For the last 20 minutes it hasn't crashed out, but I've only saved two documents and this error has only happend three times in a month of using the application, though two of those times were within an hour of each other today.
I'm not 100% certain but I believe that each file it has happend on is also one that I had just saved for web.I found as much of a crash log as I can in this new os but it reads as follows:
The program Illustrator.exe version 16.0.3.691 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: 1110
Start Time: 01cdd7e0adea99a9
Termination Time: 322
Application Path: C:Program FilesAdobeAdobe Illustrator CS6 (64 Bit)Support FilesContentsWindowsIllustrator.exe
Report Id: 9856d88b-43df-11e2-be73-10bf48b5fe20
Faulting package full name:
Faulting package-relative application ID:
I'm not really very familiar with the action center control panel but I couldn't find any additional information there.
Illustrator :: Saving CS6 With More Than One Artboard
Aug 28, 2012I'm finding that when i add a second artboard to an existing ai, then save and close, it has disappeared on reopening.
I have both pieces of artwork (one for each page), but 1 of the artboards will have disappeared. Irritatingly the remaining artboard sits between the 2 pieces of artwork - in the wrong position for both!!!
Illustrator :: CS6 Crashes When Saving To EPS?
Jul 5, 2013I am running a fully licensed pro version of Illustrator CS6 on two machines. They both now crash (freeze) when saving EPS. Fine on PDF, Ai, etc... just EPS on both machines. No error messages, just a freeze then a force quite.
Both machines are 27in iMacs, under one year old, latest versions of Mountain Lion, all top notch and running on i7 & i5 processors. Spec is not the problem. All software is updated.
Really at a loose end. Reinstalled the software on one machine, OK at first, then back to crashing.
Illustrator :: Why Is 6 So Slow When Saving
Nov 27, 2012AI6 is very slow on some saves. Nothing fancy with this file. No gradients, no clipping masks, no placed images, simply color line art. I run a Mac Pro with 16Gb ram and Tb raid drives . I've had this problem with a few other files and I think in CS5.
View 3 Replies View RelatedIllustrator :: CS5 Crashing On Saving
Aug 23, 2012My illustrator is crashing on saving files.I thought it was issue with network. i copied files to desktop and still it crashes.event log is :
Faulting application name: Illustrator.exe, version: 15.0.2.399, time stamp: 0x4ce0f2fc
Faulting module name: AGM.dll, version: 4.20.69.9418, time stamp: 0x4c296457
Exception code: 0xc0000005
Fault offset: 0x00240f9d
Faulting process id: 0x1624
[code]....
Illustrator :: CS6 - Saving SVG Via Save For Web?
Nov 12, 2012I can't save for web to SVG format from illustrator CS6. The option isn't in the format list of the save for web dialogue; I only have gif, jpeg, png-8 and png-24. I am sure it used to be there, so where has it gone?
Have I got to do something in the process of setting up a new document?
Illustrator :: CC Crashes While Saving Anything
Mar 1, 2014I am a graphic design student in college in my last semester and I have many projects invovling Illustrator I need to get done. Since a few weeks ago, both my Illustrator CS6 and CC have been crashing only when I save my progress. I have since uninstalled the CS6 and only have the CC version, but I go to save anything and it tells me Illustrator has stopped working and shuts down every time. I need these projects saved for Monday.
View 11 Replies View RelatedIllustrator :: How To Get Crispest PDF When Saving From CS6
Mar 21, 2013I am trying to create a presentation and want the absolute best, crispest PDFs possible. Any tips on how to achieve this?
View 9 Replies View RelatedPhotoshop :: Saving Text In Illustrator
Jun 28, 2005This is a question about Adobe Illustrator, not Photoshop, so I hope this fits under this topic category. I've been given some floor plans done in Autocad and they need to be converted to PDFs. Autocad does not save as PDFs so what I have to do is open the files in Illustrator and then save as PDF. The problem is that, for some reason, Illustrator won't save the text that's included in the plans. I can open it and see the text just fine (labels, dimensions, unit numbers, etc.), but when I save it and open up the PDF file, all the text is gone. I'm getting around this by transfering it to Photoshop since Photoshop does preserve text when saving as PDF. But even this is more difficult than it sounds. In order to transfer it to Photoshop, I have to first open it in Illustrator, copy and paste it into Photoshop, and then manually retype all the text because even when copying and pasting from Illustrator, the text dissappears. Does anybody know how to preserve text when saving as PDF in Illustrator, or at least how to preserve text when copying from Illustrator and pasting into Photoshop?
View 4 Replies View RelatedIllustrator :: Saving A Vector For Email?
Dec 23, 2013I've recently been working with a new client who needs all image formats to be vector. I'm having a problem after sending the final images though. On my screen they are smooth and don't have any problems when it comes to clarity, but when I email them to the client they tell me that the letters have jagged edges and aren't proportionate.
Is there a certain way I need to save these images when it comes to emailing them? When I save them I go to save as, then I save it as an .eps, and then when the saving options box pops up I keep it on Illustrator 11 and then save it. Should I be picking an older version of the illustrator when I save it, or should I be using the "save for web" button?
Illustrator :: Images Distorting When Saving As PDF?
Nov 21, 2013I am having a problem when exportng a file as a pdf. A jpg image that I am using distorts. This is a high res file and I have tried exporting with both the 'high quality print' and 'press quality' presets.
I have tried printing directly from illustrator and the image looks great, when I print from the pdf the image looks disorted.
I have attached an image to show what I mean, the image on the left is from the pdf.
Illustrator :: Metadata Not Included When Saving For Web
Jun 17, 2013In Illustrator I'm using "save for web" to generate a png copy of an Illustrator file. The Illustrator file has copyright metadata, but when I check the png copy the copyright metadata is missing.
Why doesn't the png copy have the same metadata as the original file? Shouldn't the metadata be passed along when using "save for web"?
I applied the metadata in Bridge using the append metadata command.
Illustrator :: Error Saving When Using Lines
Jul 18, 2012I'm just trying to update a CS3 illustrator file to 5.5. I continually get the error 'an unknown error has occurred' when saving it. I've copied and pasted each item individually into a new file and then saved to eliminate what the problem is. What i've found is any lines drawn/used are causing the error. How do I fix this?
View 4 Replies View RelatedIllustrator :: Saving Over Files In Right Location
Nov 8, 2013I am working from a server, say there is folder A, B, C and D.
I open up a file from folder A, amend it etc and go to save over that (cmd-shift-s - i use this as it previews correctly rather than hitting cmd-s where it will preview only a bit of the artboard) and the save dialog box will either show folder B, C or D or will just Downloads or Documents for example - basically it will want to save anywhere other than I opened it from!
This is difficult because if I am working on 4 or 5 files making small amends and just quickly wanting to save over them and get onto the next one I have to then navigate to where the file is, even though I opened the document from there.
I have experienced this problem ever since upgrading to Mavericks!
Also, the Save box is tiny! I always have to expand it to see the folder contents etc
It doesn't work either way if I use Save (cmd-s) or Save As (cmd-shift-s). My colleague is also experiencing the same problem since upgrading to Mavericks.
Illustrator :: Saving A Large File To PDF
Oct 17, 2013Saving a large file from illustrator to PDF. The pdf is only saving the printer marks and bleeds. Checked the layers in the pdf. Made sure the pdf compatible was checked in Illustrator.
View 3 Replies View Related