Photoshop :: Not Enough Memory (RAM) Error Msg

Nov 8, 2007

I have given 80% (or 1.270 Gigs) of RAM to PS CS3 Extended. Everything works well until I use the new "Quick Selection Tool (W)." Whenever I use it, I get the message, "Could not complete your request because there is not enough memory (RAM)." The "Magic Wand" and all the other tools work great.

This happens regardless of what else is happening on the computer. Usually only PS and PS Bridge are the only apps open. And it doesn't matter how many images are open. I'm running Windows XP.


CorelDRAW Graphics Suite X5 :: High Memory Usage And Out Of Memory Error

Nov 4, 2011

I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.

I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.

What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.

To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem. 

Where from comes this memory usage difference?

My PC:

Windows 7 - 32bit

4GB of RAM

Intel Core2Duo 2 x 3.0GHz

700GB free space on drive C:

View 16 Replies View Related

Photoshop :: Error - Not Enough Memory (RAM) In CS6

Mar 19, 2013

Machine Spec :-
Machine :-- Windows 7 Pro 32 bit
CPU : -- 1 x Pentium Dual-Core CPU E5500 @ 2.80GHz (2792 MHz)
Motherboard :-- DG41WV
RAM :-- 4 GB DDR3
Videoadapter :-- Intel(R) G41 Express Chipset (1024 MB)
Hard Disk :-- C drive free space 23.8 out of 43.9
D drive free space 39.8 out of 48.8
E drive free space 37.6 out of 48.8
F drive free space 71.1 out of 91.2
Problem :-- When using the Mixer Brush tool,the photoshop stop responding and showing error.
Error Massage :-- "Could not use the Mixer Brush tool because there is not enough memory(RAM)"

View 4 Replies View Related

Photoshop :: CS6 Not Enough Memory Error?

Jun 17, 2013

Just installed CS6 about a month ago and at different points of taxing the program and my system and on various tools or events in Photoshop, I get an error that tells me there is not enough ram to complete the task.
I'm using CS6 Extended 64-bit and my comp specs are:
Windows 7 Pro
16 gigs of DDR3 memory
Intel i-7 second gen chip
ATI Radeon 5500 with 2 gigs onboard memory
And all of my stuff is up to date - including PS.  I've allocated 75% of the system memory to PS in the preferences. 

View 9 Replies View Related

Photoshop :: Error :: Not Enough Memory

Aug 1, 2008

when I am converting RAW images via CS3 - ACR, I get the message "Not Enough Memory"

This happens when I try to convert more than 25 or so images during one Photoshop session. If I close down Photoshop and then reopen the program I can usually convert another 25 or so images before getting the message again. When I used CS2, I would be able to convert 100 or so RAW images with no problems.

I am not sure what to do.

My system is a Dell XPS with an Intel Core 2 Quad, with 4GB of ram.

View 39 Replies View Related

Photoshop :: Getting A Low Memory Error!

Feb 27, 2005

I am using CS and just recently ran into an error that is starting to frustrate me. I just upgraded from a P4 2.4 with 512mb of RDRAM to a P4 3.4 with 1024mb of DDR2 SDRAM. I never had this problem before, but I'm trying to filter>distort and I keep running into "not enough sufficient ram" errors. i closed all my other running programs and tried again. same error. so, i restarted the computer and ran PS again only to have the same problem. The picture is 8.5x11 at 500dpi. I increased the memory allowance from 50% to 70% and added more space for the scratch disc and still nothing. Whats going on? Isnt 1GB ram enough or do I need more?

View 9 Replies View Related

Photoshop :: Out Of Memory (RAM) Error...

Oct 18, 2004

i'm using photoshop CS, when i try pasting an image from other apps like macromedia fireworks, i will receive an error, not enough memory (RAM) . however, i have more than 200MB of free memory stated in my task manager. I find this very weird, i have check other setttings in photoshop, they're in default settings. i have tried to allocate more memory to photoshop, but nothing work!

View 1 Replies View Related

Photoshop :: CS3 / Not Enough Scratch Memory Available Error

Aug 15, 2013

I am Using Adobe Photoshop CS3 Version 10.0 and I keep getting the error "Not enough Scratch memory available to perform this action" whenever I try to Save a .psd file to a .jpg/.jpeg file.
I did go to Edit -> Preferences -> Performance, and add my other two partitions as scratch disks, also put up my E: drive as the primary scratch disk on the top of the list (Which has 80GB's of space) but I still keep getting this error.
My file (the .psd that i am trying to save to a .jpg) has a total size of 56MB and 300dpi with 4 or 5 layers in it and the target jpg file is supposed to be 12inches by 20inches.
Some other things I have tried is celaring the %temp% folder, Defragmenting my Hard Drive(s), Disk Cleanup, set my System Page file to 4GB, but all this is of no use.I know that I have enough RAM and Hard disk space.
does the type of RAM and Processor you are using effect this? I have a DDR RAM.. 2GB, I know its outdated, its our office computer I am working on.. My Processor is a Core 2 Duo which isnt bad.

View 6 Replies View Related

Photoshop :: Error :: That Says Etc Etc Memory Cannot Be Read...

Sep 2, 2008

i had CS3 running fine for as long as i can remember.. (on winxp pro sp3 32bit)

then all of a sudden today when i try to start it.. it opens and the splash screen comes up, then when it gets to 'initializing palettes' i get an error that says etc etc memory cannot be read...

i uninstalled, ran the cleaner, deleted all cs3 folders in docs&settings.. reinstalled.. same problem ...

View 4 Replies View Related

Photoshop :: Error :: The Memory Could Not Be Written

Mar 19, 2009

I have an HP Pavilion 730. I have purchased the upgrade to CS4 and it has been working for a while. Now all of a sudden, when I open the program, the computer goes "boink" and a message comes up that says:

The instruction at "Ox77e78804" referenced memory at "0x0at1a1470". The memory could not be written. Click OK to terminate or click cancel to debug program.

No matter which one I do, it shuts down CS4 totally?

I have uninstalled the program and reinstalled it and it still does the same thing.

View 1 Replies View Related

Photoshop :: Not Enough Memory To Perform...Error

Jun 27, 2008

I previously used PS CS on XP Pro and all was fine. I then upgraded to Vista. Since I reverted back to XP Pro I keep getting error messages.

When I use the 'Open as' command, I get:
"Could not complete your request because it is not a valid Photoshop document" (yet it's a JPG) - works ok if I just usen File >Open.

When I try and shut/close down the file/program, I get:
"Could not complete the Close command becuase there is not enough memory (RAM)"

Strangley enought these messages then just disappear. Really stuggling to use this software due to the annoying pop up messages.

View 3 Replies View Related

Photoshop :: Memory Error In PSCS4 With Copy And...

Nov 9, 2008

While working on a complex project with PSCS4 that involved copying and pasting from numerous open documents, I have been receiving an error message shown in the link. PS then shuts down with loss of my data.

I'm running Windows XP Pro with a dual Xeon processor workstation with 2GB of error correcting memory. PS3 and other applications have been working properly.

Any suggestions other than going back to PS3?

View 3 Replies View Related

Photoshop :: DDE Server... Memory Could Not Be Read Error

Dec 17, 2008

I recently installed CS4 and when I quit Photoshop CS4 I get a "DDE Server... memory could not be 'read'" error. I've looked all over the forums for solutions to this, tried deleting my preferences file, reinstalling CS4, and fiddling with performance options, but nothing seems to make a change. I never had much trouble with CS2 or CS3.

View 9 Replies View Related

Photoshop :: Error :: Could Not Complete Your Request Because There Is Not Enough Memory (RAM) ...

Feb 29, 2008

We have Photoshop CS2 running on Windows XP SP2 machine with 3 GB memory. Whenever we try to open illustrator CS3 file in Photoshop get following error message:

"Could not complete your request because there is not enough memory(RAM)".

We used to be able to do this without any problems untill I upgraded the memory from 2 GB to 3 GB. Dell technician came and changed the memory chips on the PC still get the same message. I went into performance monitor and not much memory is in use when this error comes up. Tried opening just one application at a time too.
Is there any patch that I need to install on the PC.

View 1 Replies View Related

Photoshop :: PSCS4 Memory Error With Image Processor

Nov 2, 2008

When I use the image processor in PSCS4 to process a large number of raw files using ACR 5.1 (Nikon D3 NEFs), I consistently receive an error message after about 10-11 files have been processed that the instruction at 0x696336ab tried to read memory at 0x6C (or thereabouts) and the memory could not be read. I am saving as JPEGs with the color space set to sRGB.

I de-installed and reinstalled PSCS4, but the error persists. The image processor worked fine with PSCS3. A workaround that solves the problem is to process the files as a batch using a simple action to accomplish the task.

I am running Windows XP Pro Service Pack 3 with a dual Xeon processor and 2G of error correcting memory.

View 2 Replies View Related

Photoshop :: Error :: The Instructions At 0x6963361ab Reference Memory Could Not Be Read

Nov 9, 2008

While working on a complicated project involving copying and pasting into PSCS4 from several applications I received this error and Photoshop closed down with loss of my work.

I'm in Windows XP Pro SP3 and using a workstation with 2GB of error correcting memory. I had no such problems in PS3 and other applications work fine.

View 2 Replies View Related

Photoshop :: Application Error :: Memory Could Not Be Read Cancel Or Debug

May 20, 2009

I am using Adobe Photoshop CS4 Extended Student Edition. My computer is Windows XPI continue to get the error Photoshop exe Aplication ErrorInstructions at oxofa92c5b sometimes is states oxofc42c5breference memory oxoooooo28 Memory could not be read Cancel or debug. it shuts down. no matter what you click. It does this after I get the picture open and when I click on different tools. This is newly installed on my computer and newly bought program.

View 9 Replies View Related

AutoCAD Inventor :: Out Of Memory Error Even Though 11GB Available?

Jul 16, 2012

I just got the attached error message when trying to exit a sketch that I was editing.  Windows says I have 11Gb available so there must be a problem with Inventor.  I am now stuck with no way to edit the sketch without getting this error. It's a part that was migrated from 2011 format using task scheduler.  Using 2012 SP2

View 1 Replies View Related

Revit :: Error / Insufficient Memory For Load

Oct 19, 2011

I am having a problem opening some larger revit models (100MB plus) in revit 2012 I will receive a message saying:
Insufficient memory for load. This computer does not have enough memory to open 'file name' in autodesk revit architecture 2012. Increase the available memory or contact Autodesk support for more information.

We are working on Windows XP SP3 with 3.23gb RAM. Now normally it would be as simple as upgrading the RAM on this machine to 4GB as specified in the system requirements for 2012, but a previous computer I was testing with only 2GB RAM was able to open these files without any issues (despite being a little slower).
The only difference I can see at this stage is the 3GB switch is enables in the 2gb machine.

View 1 Replies View Related