Corel VideoStudio Pro has the ability to apply multiple filters to a video. There are buttons to change the order of a filter. However, it's not clear to me which order they are applied to the video clip.
Are the filters applied from the top of the list down or layered on top of each other from the bottom of the list up?
Probably a well worn topic but I've lost all my video filters in VS Pro X2? Just trying to crop some green screen shots that still show the garage wall.
View 2 Replies View RelatedWhen I open VS and insert video, the "Edit" tab (in the topmost horizontal tab bar) is highlighted and I see the Overlays in the righthand panel: if I click on other tabs they highlight and show the appropriate options in the righthand panel.
However, when clicking on the "Attributes" tab (halfway down the righthand panel) the panel goes blank: if I click on the adjacent "Video" tab the panel remains blank.It seems that I have lost Video Filters.
The Video Filters option shows in the dropdown box, with an "All" to the left of it, but nothing shows.
if there are any tutorials using PIP for VS X3. Also have found that some of the FX filters do not work and I was of the understanding that they were included with purchase = such as Ripple and Twist? I sometimes get a message when trying to use one of these FX filters asking me to register - what is that for is it for the newsletter from Blue FX?? I do not want the feature if it is only a trial and then you discover you can't remove it like previously.
View 2 Replies View RelatedWhen I try to save my project to any kind of DVD format, etc, I get a failure or crash. If I remove the video clip, no problem.
The video clip plays from the thumbnails, but when I Preview the project it does not display.
The video was taken with a phone, in 3gp. Edited using Avidemux (to rotate).
Video properties screen shot is attached.
I am using VS Pro X2.
When I go to my Video Filters they are gone.
I have renamed my vfilter.rsf with no results, as well as the other fixes suggested in this furum for VS10. There does not seem to be a topic for this issue for X2.
I have recently bought the upgraded version of vsx2 (upgraded from vs10) and AGAIN i have experienced lost video filters.
The symptoms are slightly different, "video filters" are still listed in the drop down menu but when I click on them a tab pops up that read "all" when I click on that the library clears and only empty space is there, no filters. Is the fix the same as it was for VS10?
I have a problem with the audio of one of my video projects. During the actual video shooting, the microphone had acoustic problems and it is heard on the recorded clips.
I had split the audio from the video and want to use some audio filters on it to see if it works, but the audio filters choice on the clip menu is greyed out. How I can enable the audio filters
I cant find a way to access the filter library, click by click workflow.
View 2 Replies View RelatedWhen loading the clips into Videostudio from my JVC GZ-HD6AG camcorder I have problems to get them in right order.
I want them in date and time order but it seems as VS insert the clips sorted on file name of the clips?
When loading the clips from the camcorder via USB I get all clips into the computer as separate files with correct time (date, hour,sec). I try to sort the files before inserting them to VS but with no luck when inserting.
I am using "Insert Media File to Timeline/ Insert Video" as well as "Insert Digital Media".
how to get the clips in correct order?
I am using Ulead Video Studio version 11 for a film project. However, I have just finished the trimming and now Ive come to the rearranging of clips which I thought would be the easiest part. With clicking and dragging in the storyboard mode, it seems that I can only move clips from left to right. The exception is the very first clip - that cannot be moved at all. And no matter how many times I try, I cannot move clips from right to left. Crazy.
There are 94 seperate clips in this film and obviously, I don't want to shift every single one of those to the right just to get the correct arrangement of several clips. I've held down the shift key and also the alt key while clicking and dragging but that does nothing. For version 11, is there indeed a way that I can move clips from right to left? What I want to do is dead simple. All of the other NLE programs Ive used allow for hassle free rearrangement of shots, even Windows Movie Maker.
What are the steps to apply filters to all my video clips in Corel Videostudio? I am able to drop each each filter to each of the clip. But when I try - Select all clips - Drop a filter to the selections, it does not work as expected. Instead the filter gets applied only to one clip.
Is there any other way to achieve what I am doing - Automatically fix exposure and colour levels to all clips?
Why I am getting a "insufficient memory" error 15036:0:0 when trying to select certain filters such as "Auto-Exposure" and "Brightness & Contrast"? Other filters can be selected without getting this error.
I am running W7 64 bit.
I have Pro X4 ultimate. Sommes filters transition 3 D like cube floating don't work. I have reinstall many time but the result is the same. The others filters are OK.
Before I had Pro X3 et Pro X4 and it was OK.
How to restore my video filters which suddenly disappear. There is no way I would have accidently deleted the features as the program does not allow me to do so. I downloaded the software but the problem still persists.
View 2 Replies View RelatedI tried the trial version of VideoStudio Pro X4 without any issue. So I decided to buy it and install the official version from CD. And now, with this version I get the following error message while trying to create a fideo file No combination of intermediate filters could be found to make the connection [17128:1:4]
I checked internet and saw how to troubleshoot the issue. I removed everything and added functionality to the project. It does not matter at all. I always get the error message. Even if I add one video from a cam without changing or adding anything to it. So no filters are used, no nothing.
Settings:
I use "same as project settings"
NTSC non-drop frame [30 fps]
Microsoft AVI files
24 bits, 320x240, 30 fps
Upper Field First
Uncompressed
PCM, 48.000kHz 16 Bit, Stereo
I'm in search of an answer for a MAJOR problem I am having! When I capture pics to a file for a project, they are renamed to a time and do not stay named as my original file. It is absolutely necessary for the pics to be in numerical order for the projects I do. I see an option to sort, but it sorts by new name (time) instead of the original file name. I've not been able to find an answer and I have a HUGE project that must be completed tomorrow evening.
View 2 Replies View RelatedWhen a video is loaded does it make a difference for the output what the project properties is set to, standard the project properties is always mpeg in my Videostudio X5, while i am editing avi or mp4 etc..?
Is there a way to see which field order a video has like progressive of upper field etc? Right click the video file in Studio does not give the answer. When i open mediainfo or another like gspot i do also not see field order yet maybe under a different name there is: progressive but is that frame beased, UFF or LFF?
When creating DVDs from sony mini DV tapes. I followed the lower field first, LFF, in capture and project settings and then for the properties in the burn phase.
On these new clips I have just created I could not find the field order for interlacing, so I used the 'trick' of creating a new project and inserting the clip into the project time line, then as UVS tries to match the project properties to those of the clip, I find from the propeties that the field order of the clip is "frame based".
This is intended for a PAL DVD so is this something I have to change to either UFF or LFF in the project property settings, or can I leave it as frame based. Will this impact the quality ?
What does it do for lacing when it is "frame based" ?
ps I believe this frame based busines is something to do with systems that do not use interlacing to fool the eye with 25 fps x 2 ~ 50 fps
I would like to take my many photos and videos and be able to batch edit a folder's worth at a time after they have been added to my timeline. I have several that have the same lighting problems and that would save me allot of time.
View 1 Replies View Relatedthere was one photographer who's style always looked really cool to me but I could never duplicate so I thought maybe someone here could figure it out.
I notice that the shadows are pretty blue and the highlights a lot more yellow,
Adobe has stated that Photoshop CC users will have access to all files saved on their computers.What will be the functionality of files processed with Photoshop CC and saved on my computer if I no longer subscribe to Photoshop CC?
Adobe will introduce new functions such as Camera Shake Reduction to Photoshop CC. Let's say that I use a new function on a layer or as a Smart Object, and then save it on my computer, and then end my subscription to Photoshop CC. Will I be able to open the file with my layers intact and editable in any program other than Photoshop CC?
If I save the files with the layers merged as TIFFs or JPEGs I assume that I will be able to open them with most photo programs. Let's say that I do not save merged files and I am willing to sacrifice the layers. Will Photoshop CC be required to merge the layers and save as files that can be edited in other programs? What happens with other file types such as PSDs?
Let's say I own CS6 or previous versions with perpetual licenses. Will I be able to open and edit files in CS6 with layers created in Photoshop CC?
I'm using LR 3.x and when I export a group of files, the preview tiles (not the image itself) are sometime half grey, like they didn't fully get processed. I usually delete them and re-export the problem file.
View 2 Replies View RelatedHow can i remove processed files from my HDD. it is taking lots of space in there...??
i am using softfx in the timeline and each time i process it is taking the space i want to keep the last one with which i am happy and remove the others; with the processed files that was created by smoke. so i belive i can save some space in my hdd.
I've selected around 300 images from an intial shoot of 1200. I've assigned a star to the selected 300 and developed a colour image of each. Now, I need to make a BW version of each of the 300 images
What is the simplest way to do this? I have tried to make virtual copies of the selected 300 and assign 2 stars to enable me to keep the original 300 in colour and work on the soon to be BW versions, but when I do this I can only make a single virtual copy at a time. I'm sure it must be possible to select all 300 at once, and make 300 virtual copies somehow.
Is there a simple video demonstrating this workflow somewhere?
I recently conducted a test on some RAW image files that I processed into maximum file size JPEGs, both through Adobe Camera RAW and Lightroom's Export. The Lightroom version of the same image was nearly twice the size.
View 13 Replies View RelatedI am using Lighroom 4. When I tried to export post-processed files (from NEF) to photoshop, I am getting an error (see the attachment below).
The problem has to do with missing Camera Raw 7.0. When I checked CS5 Photoshop, ACR 6.6 was installed. . When I checked Adobe webisite today, the most updated ACR is v. 6.6. How can I fix this error?
I downloaded and installed GIMP 2.8.8 in Windows XP. The Filters menu option shows only Repeat last, Re-show last and Reset all filters.Nothing else in there. Where are the filters?
View 1 Replies View RelatedI have hardly ever used filters for any of my work as I have preferred using Xara's native tools and effects to get what I wanted. But recently, I was inspired by some animation work which used backgrounds painted in Photoshop. They used a lot of textures which enhanced the look of the animation and so I thought I'd try to simulate it within Xara.
It works very well and I can export it as a PSD retaining the layers and Alpha channel. But here come my questions.
1. How can I remove the two Alien Skin demo plugins as I already have the full versions.
2. Why don't the native Photoshop plugins--Artistic, Sketch, etc.--seem to work?
I am trying to MOVE folders from my Desktop to an External Drive. Error "An error has occurred during the move process. Some files may not have been processed." I regularly Move Folders and I've never had problems before.
View 3 Replies View Relatedhow do I re-order or change the order of images within a file?
View 2 Replies View Related