I'm using LR 3.x and when I export a group of files, the preview tiles (not the image itself) are sometime half grey, like they didn't fully get processed. I usually delete them and re-export the problem file.
View 2 RepliesI've selected around 300 images from an intial shoot of 1200. I've assigned a star to the selected 300 and developed a colour image of each. Now, I need to make a BW version of each of the 300 images
What is the simplest way to do this? I have tried to make virtual copies of the selected 300 and assign 2 stars to enable me to keep the original 300 in colour and work on the soon to be BW versions, but when I do this I can only make a single virtual copy at a time. I'm sure it must be possible to select all 300 at once, and make 300 virtual copies somehow.
Is there a simple video demonstrating this workflow somewhere?
I recently conducted a test on some RAW image files that I processed into maximum file size JPEGs, both through Adobe Camera RAW and Lightroom's Export. The Lightroom version of the same image was nearly twice the size.
View 13 Replies View RelatedI am using Lighroom 4. When I tried to export post-processed files (from NEF) to photoshop, I am getting an error (see the attachment below).
The problem has to do with missing Camera Raw 7.0. When I checked CS5 Photoshop, ACR 6.6 was installed. . When I checked Adobe webisite today, the most updated ACR is v. 6.6. How can I fix this error?
From the release notes: "Catalog containing images processed with PV2003 were adding a post-crop vignette when catalog upgraded to Lightroom 5"
Does that mean all my PV2003 images (10,000+) now have a post-crop vignette included in their edit history? Or some? Or some special combination? I converted my v4.4 catalog a couple of days after v5.0 was released, so I really don't want to go back to my old v4.4 catalog and re-convert..
Are the previews of deleted images themselves automatically deleted from the previews folder?
View 1 Replies View RelatedUntitled-1 copy.jpg
When the modify dimensions box is open, the 'roundoff' menu gives me 1/16", 1/8" etc, even when DECIMAL is selected as the unit format.
This wasn't happening earlier, not sure what's going on. [in fact in a solved problem from earlier, a colleague found a drawing that had units set to millimeters, had its insertion scale set to inches! Different computer, so not related].
1- How do I move files from one folder to another with LR3?
2- If I export the processed raw file as a DNG will the processing go with the export as DNG file?
I am trying to edit a JPEG. It is one layer. My mode is Normal with 100% opacity, 100% fill. The layer is not locked.
I can use several tools including move, magic wand, paint bucket, crop. However, I cannot use the eraser, paintbrush, healing tool, clone stamp (which is the one I desperately need to use) or many others.
I have just installed Lightroom 3 - on PC laptop - and imported some images from the Picture Folder on the OS drive.Everything seems to be fine except (and its a major except) there are absolutely no thumbnails or previews of these pictures appearing in Lightroom to work on. I have tried this with a few different file formats.
View 25 Replies View RelatedIn LR 4, you should skip the previews and just start playing a slideshow (it would render as it played). It looks like that's been removed in LR5? How can I restore the LR4 functionality?
View 4 Replies View RelatedI have about 20 gigs of previews on my hard drive, yet have LR set up to delete the 1:1 previews after 1 day. How to force LR to get rid of all these previews and free up the 20 gigs of hard drive space?
View 1 Replies View RelatedFacts - MacPro with 16gb ram and latest OS X. When i import images 1:1 previews are generated. My preferences file says to never get rid of 1:1's and I have a 90gb cache file. Using 2 - 24" monitors.
Question:Grid view in one display and the other shows loupe view. When click on loupe view on second monitor to go to 1:1 it can take 15 seconds (D800 files) for the 1:1 loupe view to show. What is weird is that if I go to an image in grid (second monitor off) and go to the menus and build a 1:1 preview then when I open loupe on the second miniotr and go to 1:1 it is immediate with no waiting.
Added later Have instructed LR to build 1:1 previews on a group of files. After doing this the 1:1 loupe view is immediate. For those images that were not yet rendered took time to show 1:1 in loupe.
I rerally do not understand how this is happening since 1:1s were rendered at import. Evbidently the import 1:1s have been removed - but why?
I just switched from a PC (XP) to an iMac (Lion), and have gotten all of the pictures and catalog moved over. HOwever, none of the previews show. When I go to develop mode, picture opens, preview generated: But, when I then switch to another file, the preview seems to disappear and has to be regenerated each time.
View 1 Replies View RelatedIs it possible to make preview photos that have the exclamation mark ( ! ) top right - into low res jpegs? I seem to have accidently deleted the RAW files before exporting.. not sure how this happened as I don't recall doing it. They are not on my external hard drive and sadly not on my memory card either.
View 1 Replies View RelatedDo the previews (1:1 etc.) get deleted from the previews.lrdata file when you remove the photo from Lightroom?
If yes, does it happen imediately, when the catalog closes, or when you optimize?
If not, how do I get rid of them without loosing the rest?
I have several fairly large catalogs and the preview data files are getting pretty large.
Lightroom 4.4 (will switch to 5 when I have time between projects)
Mac OS-X 10.6.8 & 10.8.4
I have pictures on an external hard drive that are imported into my catalog. One folder ( out of many) when called up do not show previews when in Library. If I choose develop, the pictures appears and so does the preview. When I try to backup , I get an error message that my preview cache is having a problem. All other folders have good previews.
View 2 Replies View RelatedI just installed LR 5 and find all the previews grayed out. In grid view I see only placeholders and metadata, no images. Also the navigator window is blank. When I go to develop-mode the image stays invisible, until I enter the cropping mode. Only then the image becomes visible, but after exiting this tool it is gray again. Removed LR and installed again, same issue.
View 2 Replies View RelatedTuesday night, I was working on a senior photo session. Everything was working perfectly fine. I decided to export the 2013 sessions to a new catalog. Everything still looking great. No issues.
Some potentially important info: I was using two monitors: a pro-level Viewsonic LED backlit 24" calibrated monitor and my laptop monitor. I was working with the Nvidia driver to calibrate the laptop monitor to be "close" to the pro monitor. I was able to get there using the Nvidia controls (versus the defaults). Then the Nvidia auto-updater prompted me to update my video driver that same night. I let it do its thing. Everything appeared to be fine with it and I was still able to work with LR5 no problems.
I had to take a break for a few hours. So, I closed LR5 and came back later to work on more images. When I pulled up the new 2013 catalog, all the image previews (thumbnail and large) were gone. The physical images were still on the drive, but I couldn't see them to edit nor preview them no matter what module I chose. I selected various images I'd just worked on and went to the Develop module - no dice. The preview was not working nor any thumbnail previews.
So I did some troubleshooting. I deleted the LR5 prefs file and let it recreate the file. Still nothing. Same behavior. I went to uninstall LR5 thinking I'd just reset the whole shebang, and noticed that I had LR5 and LR5CC installed (apparently CC didn't uninstall the single license version). So I uninstalled both LR5 installations. I rebooted and reinstalled from CC.
...still nothing... same behavior.
I uninstalled it again (since it's unusable) and installed Bridge CC. Voila! The images are all there and I can work with them in ACR, etc. No issues at all.
This leads me to believe that something got messed up with LR5's configuration with previews. I believe I did have Smart Previews enabled.
So now that you have all that info and backdrop: What should I do to get LR5 back to normal so I can keep working on these paying gigs? If i can understand what caused the break, I'll avoid doing that from now on.
LR 4.1 starts but never finishes. It doesn't matter if it is one photo or more.
LR 4.1
Windows 7
Just updated 5.2 (win7 x64) All my collections show, but everything in the library is blank. Develop also shows just grey?
[URL]
I've seen this topic on the threads, but mostly for previous versions. I have LR4, and my previews load so slowly. How can I speed them up? Bridge handles the previews so fast and it is so much nicer going through with that program, but I'd like to move my workflow to LR4 solely. But hard to with the preview handling being so much slower.
View 8 Replies View RelatedVeteran LR user here. Since updating, LR 5 consistently causes snags (for us) when creating web galleries. Here's the workflow: after editing raw files and applying settings, we have a nice folder of images cropped and ready to preview with client.
Now, when we go to the Web Module, the previews are grayed-back in the Filmstrip, and images won't appear in any of the web gallery templates (either custom ones we designed or the preset versions.) We've tried everything from flagging and staring images to get them to appear. Also save metadata to all the images in the folder.
The only thing that seems to work is to close LR5--with backup and catalog optimization--then, we re-open LR5. That seems to "free up" the Web Module. Upon reopening LR5, our folder of images suddenly appears when we go to the Web Module.
This is an unacceptable work around b/c closing and optimizing takes alot of time. Making web proofing galleries used to be a snap in previous versions of LR, now we're stumped in LR5 trying to figure out what we're doing wrong.
I created a catalog with smart previews from my PC (Win 7, 64 bit) and copied it onto my macbook pro (OSX 10.9.1) via a thumb drive. I can view the photos fine, zoom in and use the develop controls. However I get no histogram, cannot export and below the histogram it just says 'photo is missing'.
The whole point of this exercise was to choose and export lo-res selects to customers when out of the office. I can't do that.
Frequently LR directs my display to actually change 1:1 sharp previews to blurry, and if I come back to them later, they are sharp for about 1 sec and become blurry again.AND there is no "loading..." note.
No, these are not modified files. They are fresh imports with 1:1 previews as always.I can get proper 1:1 in the app window. Lucky I know this or I'd have thrown away lots of stuff.
It's the Window>secondarydisplay>show that fails. That display is actually the DVI input.The primary screen app window is the VGA input.
LR 5.3
Mac Mavs
I experience a lot of annoying waiting time watching the progress bar while Lightroom is "preparing the previews in advance". In previous versions you could skip this process and the previews were built while the slideshow was running, which was performing very well.
Please bring back this "feature". I know the previews don't have to be built if you already have 1:1 previews but it's not very convinient to have 1:1 previews for every image you might want to show in a slideshow. Especially since LIghtroom 5 invented the Smart Previews I don't understand why these previews can't be used for the slideshow module as well.
Is there a bugfix coming or any workaround within LR (no 3rd party software)?
I've had trouble since upgrading from LR3 to LR4 with previewing files on import. Sometimes reports no import, sometimes just shows thumbnail; sometimes fails on all photos, sometimes on just some. Happens for different file formats (ie, JPEG, raw from different cameras), different card readers, different USB ports. Canceling the import and selecting import again seems to be a workaround, but this is annoying nonetheless.
View 3 Replies View RelatedAll what I get are gray previews with a newly built catalogue and also with an older one after having moved my pictures and LR to a new PC. The pictures contain some metadata like numbers and scores (stars or colors) of a former evaluation. These gray pictures appear in all modules, except in the web module. Only there I get the normal appearance. The monitor is recently calibrated, and I also deleted the .irdata file and got a rebuilt one, but this did'nt change the situation.
View 1 Replies View RelatedI am running out of room on my OS SSD and have a spare SSD and would like to move the Previews folder.
I tried using this link:
[URL]
Which says the method will redirect LR to another folder on a different drive - but it doesn't seem to work for me (Win 7). If I do what it suggests and delete the previews folder (after backing it up), LR just begins to recreate new previews on the C-drive LR folder in My Pictures.
Is it possible to get the emailing of "smart previews" functioning in LR 5.3?
View 3 Replies View RelatedI set create smart previews when I imported my images...none show up.
I selected some files (with originals available) and went Library>previews>create smart previews...the tast bar zipped across the top left but no previews were created.