I set create smart previews when I imported my images...none show up.
I selected some files (with originals available) and went Library>previews>create smart previews...the tast bar zipped across the top left but no previews were created.
I'm wondering if it's possible to create smart previews for images that were imported into the catalog in a prior version of LR. As my catalog continues to increase in size, I'm considering relocating my images to an external drive (currently on the hard drive). I'm obviously concerned about doing any unintended damage to the catalog and workflow.
View 1 Replies View RelatedI created a catalog with smart previews from my PC (Win 7, 64 bit) and copied it onto my macbook pro (OSX 10.9.1) via a thumb drive. I can view the photos fine, zoom in and use the develop controls. However I get no histogram, cannot export and below the histogram it just says 'photo is missing'.
The whole point of this exercise was to choose and export lo-res selects to customers when out of the office. I can't do that.
Is it possible to get the emailing of "smart previews" functioning in LR 5.3?
View 3 Replies View RelatedWhen on road, using smart previews away from original files, can I rename file?
View 9 Replies View Relatedi am a photographer who shoots on the road and has a digital tech/retoucher that is away from the location. with lightroom 5, i was excited to export my catalogs with smart previews at a fraction of the size to send out to the digi tech for editing. the plan was for him/her to then send back only the catalog files which i could apply to the original master files and export finals for the client. i assume this is possible, but am having trouble dialing in the workflow.
View 1 Replies View RelatedI would like to be able to selectively enable Smart Previews on a per-file basis, rather on entire directories.
It would be great if I could do this after importing files, too.
I am using:
Lightroom 5.0 64-bit
Windows 7 Ultimate 64-bit
I haven't paid much attention to my smart preview status. I always import and create smart previews and watch the completion bar go across the page and see the message after import that x number of smart previews were created.
But when I look at my catalog files (which I keep on Dropbox if that matters), I see that the file shows last updated on OCT 30 and it's 7.68gb. If I do a spotlight search for the smart preview irdata file, I find it has the same date but is 9.3gb. In either case, the size seems smaller than I would expect.
On my laptop, the smart previews of recent imports are all there, so I'm using them. On my desktop (even when disconnected from the drive with the original files) I do not see them (since that machine is always hooked up to the drive that the originals are on, it doesn't really matter but I'm confused).
Is there some setting that I can't find where I've set a max size of the smart preview file? Is there any way it could be saving somewhere other than in the LR cat folder I'm saving to?
I observed that when photos are deleted while in a smart preview collection the photos are not removed from the smart preview collection. Resulting over time in a large smart preview file with unused photos, consuming your hard drive space.
It is therefor important only to delete photos when they are first discarded from the smart preview catalog.
When eventually photos are removed while they were available in the smart preview catalog the work around to delete them is to locate the catalog named: "Lightroom 5 Catalog Smart Previews.lrdata" and to open it with Lightroom. When opened you can select the photos and remove them. After that you can remove the folder from your Lightroom folders and the file itself will consist of only 0 bytes.
It would maybe a good idea that removing photos automatically would discard them from the smart preview.
Can I sort by keywords in the NEW Smart Previews in Lightroom ?
View 3 Replies View RelatedPrinciples of smart previews and how they can be used with an external Hd but I wish to know HOW to transfer the smart previews from my pc to the laptop, work on them and then update my PC files whilst still retaining the smart previews on the laptop for future reference.
Naturally the smart previews would have to be regularly updated to match any work undertaken on the PC.
I’m trying to get my mind around exactly what Smart Previews can be used for. I’m wondering if I can edit them on another computer with a different Lightroom 5 installation. In the past, I’d export a Catalog from my Master machine, edit that with another installation of Lightroom on another computer and then reimport it to my Master macine. So, what I’m wondering is if it is possible to use Smart Previews in this workflow.
View 1 Replies View RelatedMuch has been written about how to create smart previews, and how to work with them, but I am unclear about how to get them from my desktop to my laptop. The smart previews were created in a collection on my desktop. I'd like to take that collection over to the laptop. I have a usb thumb drive with plenty of space. Specifically, what is the proceedure to get the previews onto the thumb drive, and then view them on the laptop, using Lightroom? Further info: The laptop does not have a copy of the desktop's catalogue.
View 3 Replies View RelatedI want to make smart previews for all of my existing files and move the originals to an external drive. It goes without saying that I want the catalogs intact. I tried to do it but was unsucessful.
View 3 Replies View RelatedIs there a way to automatically create smart previews inside a collection?Now, I know how to create a smart collection of only my holiday pictures with a five star rating. That's not the problem, but is there a way that these pictures are automatically transferred into a smart preview?
View 8 Replies View RelatedI removed bounch of photos ("Delete from disk" to be precise) but smart previews are still there! How to remove them too?
"Discard all smart previews" is not an option. I have few thousands of photos and wanna delete just 300 unnecessary smart previews.
PS Lightroom 5.0 on Win 8
I understood that Lightroom does not use smart previews as previews in most cases and still uses previews as before for working on. I normally import as standard previews because this improves speed whilst working on them. I have just ticked the smart preview box for a couple of files that I thought I might want to work on after transferring them to my externsl drive and it crashed when set with standard, OK with minimal, I am now wondering if in fact the smart previews are the previews it works on and that by setting it to standard as well it has confused the program and that is why it crashed, but then why have the option of both or is it simply a computer resources issue trying to create both standard and smart previews.
View 6 Replies View RelatedI get it. I know I need to tell Lightroom that it's "this" specific catalog that I want to be working on while being away from my external hard drive. But, just so I understand the logic: I have to opne Lightroom with the external hard drive connected and then, ejected it so I could smart previews that I've previsoulsy build. There's no way for me just to turn on my computer, away from my external hard drive, and work on smart previews? So, I guess that this my real questions: If I make a copy of the catalog from my external hard drive onto my desktop, and I tell my computer to work with this catalog while away from external hard drive, will this clash everything up?
View 1 Replies View RelatedI would like to take my existing photo's on an internal drive and move them to an external drive. I would like to leave my catalogue where it is on my internal drive. I would then like to use smart previews to allow me to edit my photo's with or without the external drive connected and have the photo's automatically sync'd when the external drive is re-connected.
View 1 Replies View RelatedNow that Lightroom 5 is out. Is there a quick way to build smart previews for all the photos that are in the existing libraries? And is it recommeded to build them for all photos. Does it essentially save two files?
View 6 Replies View RelatedI have all my data and LR installed on a desktop machine. As I never find time at home to cleanse and work on images, I would love to do so on my journeys and trips... Therefore I installed LR5 also on my laptop and would like to play around with smart previews to shape my workflow.
Is there a description on how one can generate the smart previews on the main machine and transfer them onto the mobile device?
When I have this set up and running. Would the import and work on new photos on the run also join back into the main library once back home togehter with the smart preview sync or would this have to be covered by another workflow importing a new catalogue?
Preview panel "preview" freezes indefinitely.App very slow to load while creating new previews. (previews take forever to create and update)Wrong previews showing for wrong images when swapping between folders, etc. (ie: all photos, last import, custom collections) This one is a little different...
Ratings lost when switching between folders, etc. (ie: all photos, last import, custom collections) This was a clean install that ran beautifully at first. Started noticing this more and more after using the spot tool. (my last step in processing a job)
I use separate catalogs per job. Some as small as a few dozen images. (family stuff) Others, as large as 500-600. (engagement and wedding clients)
I'm running Lightroom 4.3, and have set up a publishing service to my revel account. Starting yesterday, I'm having a problem with creating new smart published collections to publish to my revel account. After I enter the filter criteria for the collection and hit "create" I get a "An error occurred while attempting to create a new album." message. I've tried authorizing and reauthorizing my account without any success. I had no problems the last time I created a collection last week, so I'm wondering if it's a server type issue rather than something on my side.
View 11 Replies View RelatedAre the previews of deleted images themselves automatically deleted from the previews folder?
View 1 Replies View RelatedI downloaded a .psd file that is a catalog mockup. The document contains a smart object that looks like a catalog lying on a table top and I want to take my catalog art and place it in this smart object so that it looks like I've taken a nice photograph of my design work. That is the easy part!
What I want to do now is duplicate that smart object, put it underneath the original so it is peeking out and tilt it a bit. Then I want to put the back side of the catalog art on it so that it now looks like I've got both the front and back showing. Only problem I keep running into is that now when I click on the 2nd, duplicated smart object and put the different art (back of catalog) on it, it updates the original, first smart object that I want to show the front of the catalog.
Basically I want the two smart objects to not link and update each other when they are in the same document. I can't find anything online so far and am running out of time. I even tried calling Adobe and that WAS A MESS.
I have just installed Lightroom 3 - on PC laptop - and imported some images from the Picture Folder on the OS drive.Everything seems to be fine except (and its a major except) there are absolutely no thumbnails or previews of these pictures appearing in Lightroom to work on. I have tried this with a few different file formats.
View 25 Replies View RelatedIn LR 4, you should skip the previews and just start playing a slideshow (it would render as it played). It looks like that's been removed in LR5? How can I restore the LR4 functionality?
View 4 Replies View RelatedI have about 20 gigs of previews on my hard drive, yet have LR set up to delete the 1:1 previews after 1 day. How to force LR to get rid of all these previews and free up the 20 gigs of hard drive space?
View 1 Replies View RelatedFacts - MacPro with 16gb ram and latest OS X. When i import images 1:1 previews are generated. My preferences file says to never get rid of 1:1's and I have a 90gb cache file. Using 2 - 24" monitors.
Question:Grid view in one display and the other shows loupe view. When click on loupe view on second monitor to go to 1:1 it can take 15 seconds (D800 files) for the 1:1 loupe view to show. What is weird is that if I go to an image in grid (second monitor off) and go to the menus and build a 1:1 preview then when I open loupe on the second miniotr and go to 1:1 it is immediate with no waiting.
Added later Have instructed LR to build 1:1 previews on a group of files. After doing this the 1:1 loupe view is immediate. For those images that were not yet rendered took time to show 1:1 in loupe.
I rerally do not understand how this is happening since 1:1s were rendered at import. Evbidently the import 1:1s have been removed - but why?
I just switched from a PC (XP) to an iMac (Lion), and have gotten all of the pictures and catalog moved over. HOwever, none of the previews show. When I go to develop mode, picture opens, preview generated: But, when I then switch to another file, the preview seems to disappear and has to be regenerated each time.
View 1 Replies View RelatedIs it possible to make preview photos that have the exclamation mark ( ! ) top right - into low res jpegs? I seem to have accidently deleted the RAW files before exporting.. not sure how this happened as I don't recall doing it. They are not on my external hard drive and sadly not on my memory card either.
View 1 Replies View Related