Is it possible to make preview photos that have the exclamation mark ( ! ) top right - into low res jpegs? I seem to have accidently deleted the RAW files before exporting.. not sure how this happened as I don't recall doing it. They are not on my external hard drive and sadly not on my memory card either.
View 1 RepliesI unfortunatly deleted some important photos (I don't know how and I don't know why they dot appear on my backups ...) but there preview are still available in lightroom so that means they are still stored somewhere so is there a way to extract these previews ??
View 11 Replies View RelatedI have more than ten thousand photos on an external harddisk. When I travel I prefer to leave the external harddisk at home and just use the previews of Lightroom. However, only some photos display well without the attached harddisk. The rest are very pixelated.
Is there any way to make sure all photos have properly cached previews?
(I'm fairly new to trying to using Lightroom for anything useful, even though I have played with it every now and then for several years. Tools I know better are Aperture and Photoshop and ACR.)
I observed that when photos are deleted while in a smart preview collection the photos are not removed from the smart preview collection. Resulting over time in a large smart preview file with unused photos, consuming your hard drive space.
It is therefor important only to delete photos when they are first discarded from the smart preview catalog.
When eventually photos are removed while they were available in the smart preview catalog the work around to delete them is to locate the catalog named: "Lightroom 5 Catalog Smart Previews.lrdata" and to open it with Lightroom. When opened you can select the photos and remove them. After that you can remove the folder from your Lightroom folders and the file itself will consist of only 0 bytes.
It would maybe a good idea that removing photos automatically would discard them from the smart preview.
The original files are gone, deleted accidentally. But my LR3 catalog still has full size previews of all of them. Is there any way to convert those previews into photo files (dng or jpg would be fine)?
It seems like this should be possible - I can see the images right there on my screen, so they can't be gone for good!
The deleted photos comprise an entire day in Venice, Italy, and had already been sorted into keepers. Even if I could only get a medium sized jpeg, it'd be better than nothing at all.
I have Lightroom 5 and a Mac computer..Uploaded photos via card reader to Computer.Lightroom Opened but would not show previews. - said show source - would not open the previews on the imported photos
When I tried to activate the source to upload my photos - all when blank after 1 second of showing information (Photos) that were the previews. - then went blank.I stopped the process and ejected the card correctly through the finder. Thought I would try importing via image capture.
This was also a problem as the previews only showed as a flash of a second.I also notice that for some reason Lightroom 4 keeps on opening when importing photos and not Lightroom 5 - Though Lightroom 5 opens up when I edit other photos.
I removed bounch of photos ("Delete from disk" to be precise) but smart previews are still there! How to remove them too?
"Discard all smart previews" is not an option. I have few thousands of photos and wanna delete just 300 unnecessary smart previews.
PS Lightroom 5.0 on Win 8
I've recently moved from iPhoto and already had a hard time figuring out how to replicate the "hidden" photos and how not to display them in lists etc. by default.
Now I'm hanging on another thing I simply couldn't find in LR4 yet but believe it must be there - at least it would be a no-brainer to implement this if I were a programmer of LR.
The feature I'm talking about is the user-definable preview picture for each "event" in iPhoto.
In LR, in the Library module, there is this folder selection menu on the left-hand panel. Now when I hover all the folders shown there the picture in the Navigator changes to resemble the respective first picture in each of the folders.
What I want to do is select a different "preview" picture for each folder and save this setting inside the Lightroom catalog I'm currently in.
How do I accomplish that - or is it impossible with the current version of Lightroom?
I would like to take my existing photo's on an internal drive and move them to an external drive. I would like to leave my catalogue where it is on my internal drive. I would then like to use smart previews to allow me to edit my photo's with or without the external drive connected and have the photo's automatically sync'd when the external drive is re-connected.
View 1 Replies View RelatedNow that Lightroom 5 is out. Is there a quick way to build smart previews for all the photos that are in the existing libraries? And is it recommeded to build them for all photos. Does it essentially save two files?
View 6 Replies View RelatedAre the previews of deleted images themselves automatically deleted from the previews folder?
View 1 Replies View RelatedI have just installed Lightroom 3 - on PC laptop - and imported some images from the Picture Folder on the OS drive.Everything seems to be fine except (and its a major except) there are absolutely no thumbnails or previews of these pictures appearing in Lightroom to work on. I have tried this with a few different file formats.
View 25 Replies View RelatedIn LR 4, you should skip the previews and just start playing a slideshow (it would render as it played). It looks like that's been removed in LR5? How can I restore the LR4 functionality?
View 4 Replies View RelatedI have about 20 gigs of previews on my hard drive, yet have LR set up to delete the 1:1 previews after 1 day. How to force LR to get rid of all these previews and free up the 20 gigs of hard drive space?
View 1 Replies View RelatedFacts - MacPro with 16gb ram and latest OS X. When i import images 1:1 previews are generated. My preferences file says to never get rid of 1:1's and I have a 90gb cache file. Using 2 - 24" monitors.
Question:Grid view in one display and the other shows loupe view. When click on loupe view on second monitor to go to 1:1 it can take 15 seconds (D800 files) for the 1:1 loupe view to show. What is weird is that if I go to an image in grid (second monitor off) and go to the menus and build a 1:1 preview then when I open loupe on the second miniotr and go to 1:1 it is immediate with no waiting.
Added later Have instructed LR to build 1:1 previews on a group of files. After doing this the 1:1 loupe view is immediate. For those images that were not yet rendered took time to show 1:1 in loupe.
I rerally do not understand how this is happening since 1:1s were rendered at import. Evbidently the import 1:1s have been removed - but why?
I just switched from a PC (XP) to an iMac (Lion), and have gotten all of the pictures and catalog moved over. HOwever, none of the previews show. When I go to develop mode, picture opens, preview generated: But, when I then switch to another file, the preview seems to disappear and has to be regenerated each time.
View 1 Replies View RelatedDo the previews (1:1 etc.) get deleted from the previews.lrdata file when you remove the photo from Lightroom?
If yes, does it happen imediately, when the catalog closes, or when you optimize?
If not, how do I get rid of them without loosing the rest?
I have several fairly large catalogs and the preview data files are getting pretty large.
Lightroom 4.4 (will switch to 5 when I have time between projects)
Mac OS-X 10.6.8 & 10.8.4
I have pictures on an external hard drive that are imported into my catalog. One folder ( out of many) when called up do not show previews when in Library. If I choose develop, the pictures appears and so does the preview. When I try to backup , I get an error message that my preview cache is having a problem. All other folders have good previews.
View 2 Replies View RelatedI just installed LR 5 and find all the previews grayed out. In grid view I see only placeholders and metadata, no images. Also the navigator window is blank. When I go to develop-mode the image stays invisible, until I enter the cropping mode. Only then the image becomes visible, but after exiting this tool it is gray again. Removed LR and installed again, same issue.
View 2 Replies View RelatedTuesday night, I was working on a senior photo session. Everything was working perfectly fine. I decided to export the 2013 sessions to a new catalog. Everything still looking great. No issues.
Some potentially important info: I was using two monitors: a pro-level Viewsonic LED backlit 24" calibrated monitor and my laptop monitor. I was working with the Nvidia driver to calibrate the laptop monitor to be "close" to the pro monitor. I was able to get there using the Nvidia controls (versus the defaults). Then the Nvidia auto-updater prompted me to update my video driver that same night. I let it do its thing. Everything appeared to be fine with it and I was still able to work with LR5 no problems.
I had to take a break for a few hours. So, I closed LR5 and came back later to work on more images. When I pulled up the new 2013 catalog, all the image previews (thumbnail and large) were gone. The physical images were still on the drive, but I couldn't see them to edit nor preview them no matter what module I chose. I selected various images I'd just worked on and went to the Develop module - no dice. The preview was not working nor any thumbnail previews.
So I did some troubleshooting. I deleted the LR5 prefs file and let it recreate the file. Still nothing. Same behavior. I went to uninstall LR5 thinking I'd just reset the whole shebang, and noticed that I had LR5 and LR5CC installed (apparently CC didn't uninstall the single license version). So I uninstalled both LR5 installations. I rebooted and reinstalled from CC.
...still nothing... same behavior.
I uninstalled it again (since it's unusable) and installed Bridge CC. Voila! The images are all there and I can work with them in ACR, etc. No issues at all.
This leads me to believe that something got messed up with LR5's configuration with previews. I believe I did have Smart Previews enabled.
So now that you have all that info and backdrop: What should I do to get LR5 back to normal so I can keep working on these paying gigs? If i can understand what caused the break, I'll avoid doing that from now on.
LR 4.1 starts but never finishes. It doesn't matter if it is one photo or more.
LR 4.1
Windows 7
Just updated 5.2 (win7 x64) All my collections show, but everything in the library is blank. Develop also shows just grey?
[URL]
I've seen this topic on the threads, but mostly for previous versions. I have LR4, and my previews load so slowly. How can I speed them up? Bridge handles the previews so fast and it is so much nicer going through with that program, but I'd like to move my workflow to LR4 solely. But hard to with the preview handling being so much slower.
View 8 Replies View RelatedVeteran LR user here. Since updating, LR 5 consistently causes snags (for us) when creating web galleries. Here's the workflow: after editing raw files and applying settings, we have a nice folder of images cropped and ready to preview with client.
Now, when we go to the Web Module, the previews are grayed-back in the Filmstrip, and images won't appear in any of the web gallery templates (either custom ones we designed or the preset versions.) We've tried everything from flagging and staring images to get them to appear. Also save metadata to all the images in the folder.
The only thing that seems to work is to close LR5--with backup and catalog optimization--then, we re-open LR5. That seems to "free up" the Web Module. Upon reopening LR5, our folder of images suddenly appears when we go to the Web Module.
This is an unacceptable work around b/c closing and optimizing takes alot of time. Making web proofing galleries used to be a snap in previous versions of LR, now we're stumped in LR5 trying to figure out what we're doing wrong.
I created a catalog with smart previews from my PC (Win 7, 64 bit) and copied it onto my macbook pro (OSX 10.9.1) via a thumb drive. I can view the photos fine, zoom in and use the develop controls. However I get no histogram, cannot export and below the histogram it just says 'photo is missing'.
The whole point of this exercise was to choose and export lo-res selects to customers when out of the office. I can't do that.
Frequently LR directs my display to actually change 1:1 sharp previews to blurry, and if I come back to them later, they are sharp for about 1 sec and become blurry again.AND there is no "loading..." note.
No, these are not modified files. They are fresh imports with 1:1 previews as always.I can get proper 1:1 in the app window. Lucky I know this or I'd have thrown away lots of stuff.
It's the Window>secondarydisplay>show that fails. That display is actually the DVI input.The primary screen app window is the VGA input.
LR 5.3
Mac Mavs
I experience a lot of annoying waiting time watching the progress bar while Lightroom is "preparing the previews in advance". In previous versions you could skip this process and the previews were built while the slideshow was running, which was performing very well.
Please bring back this "feature". I know the previews don't have to be built if you already have 1:1 previews but it's not very convinient to have 1:1 previews for every image you might want to show in a slideshow. Especially since LIghtroom 5 invented the Smart Previews I don't understand why these previews can't be used for the slideshow module as well.
Is there a bugfix coming or any workaround within LR (no 3rd party software)?
I've had trouble since upgrading from LR3 to LR4 with previewing files on import. Sometimes reports no import, sometimes just shows thumbnail; sometimes fails on all photos, sometimes on just some. Happens for different file formats (ie, JPEG, raw from different cameras), different card readers, different USB ports. Canceling the import and selecting import again seems to be a workaround, but this is annoying nonetheless.
View 3 Replies View RelatedAll what I get are gray previews with a newly built catalogue and also with an older one after having moved my pictures and LR to a new PC. The pictures contain some metadata like numbers and scores (stars or colors) of a former evaluation. These gray pictures appear in all modules, except in the web module. Only there I get the normal appearance. The monitor is recently calibrated, and I also deleted the .irdata file and got a rebuilt one, but this did'nt change the situation.
View 1 Replies View RelatedI am running out of room on my OS SSD and have a spare SSD and would like to move the Previews folder.
I tried using this link:
[URL]
Which says the method will redirect LR to another folder on a different drive - but it doesn't seem to work for me (Win 7). If I do what it suggests and delete the previews folder (after backing it up), LR just begins to recreate new previews on the C-drive LR folder in My Pictures.
Is it possible to get the emailing of "smart previews" functioning in LR 5.3?
View 3 Replies View Related