I have Video Studio Pro X2. When creating a DVD, I would like to select an Introduction Video other then the first video clip. This is the video that runs on the DVD template when you first insert the DVD and have the menu on the screen. I video taped a wedding and I would like the Intro video to be of the bride and groom which is not the first video clip on the DVD.
View 14 RepliesI am trying to create a introduction clip to a video. This is just a short written intro describing the contents of the video. Is there a method in VideoStudio X5 Pro that would allow me to do this?
View 3 Replies View RelatedWhen I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies View RelatedI want to know how can i develop this type of movies
[URL]
and which software to use for this i want to make it in HD 1008
I want to create my own clip art from scratch using Photoshop.
What is the best method for doing this? (I'm assuming clip art is created by using the various drawing and paint tools and saved in GIF format.).
I am completely baffled by what is happening to my text. I am using a Windows 7, 64 bit computer and CorelDraw X6, and am trying to create a 3" round button graphic. About two weeks ago, I created a photo button and wanted to put white text on top of the button. This worked fine, and I sent the proof to the client.
They wanted to change the text and so I went in to change the text to what they wanted. That's when things went weird... Now, when I retype the text to insert it on the round path, I position it and then when I click off the text, the text is no longer white, but rather it has an orange outline and no fill!
I look at the color boxes and yes, the fill is white with no outline. I am no expert by far, but have been using Corel for many years. I do notice that whenever Windows does their little "updates" my computer gets wonky and they did about two of those updates in the last two weeks.
Today, I did a system restore back to 9/12/12, but it is still happening.
What would be the short cut key for creating a gap effect of the clip on the track below?
View 4 Replies View RelatedIs there a way to create a surface by manually selecting the points instead of creating a point group? I survey stockpiles for a local construction company and calculate volumes for them.
There may be 50 piles on one site and it would be a lot easier to create a surface by selecting the points manually instead of creating so many point groups.
I'm creating/selecting plot settings and apply them to my layouts.
The problem is when I open the plot dialog, the name of the page setup is not displayed. when I select the page setup name just created from the combobox, the setup is applied but the name still missing.
But this issue only combined with the new plot settings created in program. The existing page setups manually added from plot dialog are ok.The difference between the two type of plot settings is the .ISMODIFIED property is true for new settings but false for existing settings.
How can I make the plot settings not modified.
I'm extremely new to scripting; I managed to create a script to extend the artboard of my documents (which I was extremely proud of given my inexperience!) and another to align a couple of objects alongside each other, but my attempts to script some new code has met with failure.
Firstly, I need some Illustrator CS4 Javascript code that will create a bounding rectangle for the selected object(s). The selected object(s) will always be rectangular; no irregularly-shaped objects. I know this should be simple, but I can't work out the variables/attributes involved.
Secondly, some code to select the leftmost object in a document. And the equivalent for the rightmost object.
If it makes any difference, I'll be stitching these scripts together with an action to achieve the following workflow.
Two EPS files are dragged into an empty document as 'Linked Files'.The two Linked Files are aligned alongside each other. (Using a script I've already written.)The leftmost Linked File is selected and has a bounding rectangle created, which is then used to mask the Linked Object.The rightmost Linked File is then selected and has a bounding rectangle created, which is then used to mask the Linked Object.Both masked Linked Files are selected, and a bounding rectangle is created to mask them into the same Clipping Mask group.The artboard is set to the dimensions of this combined masked pair (I've managed to write that script already).The Linked Files are embedded into the document.
The reason for this is because we have EPS map files exported from AutoCAD that are left- and right-hand pages. These need to be combined into one file, but when they are brought in they lose their masks as the BBOX element is not recognised by Illustrator. The double-masking in my process above is needed to ensure that content from either map doesn't overlap the other half of the map.
I just downloaded the videostudio X6 trial version. For some reasons, some sequences from mpg clips I added to my project seems to be repeating itself for no reason. The bug occurs within a unique sequence and might change the "restart" position while the timeline cursor.
Ex: Original video = Cow cross the road, a car hit the cow then the car explode and finaly a generic
After importing the original video = Cow cross the road, a car hit the cow then the car explode, then the car hit the cow a second time
If I move the cursor right to left a couple of time, it might end up missing the first part of the clip where the cow is suppose to cross the road (replaced by a second car exploding)
It's a single clip and the final display is changing even if I don'T touch anything. I use to be a Ulead video studio user and I never had such problem.
I've been doing a project using two different cameras, I've done some of it and saved as a .mpg without a problem.Now for some reason I cannot use the split clip tool it is greyed out all the time no mater how I have the clip in the timeline be it set to clip or project.
I made one cut to align two clips now nothing..As I say I've completed three parts of the project without a problem using the split clip tool.
Working with a 1080p/60fps mp4 file from my GoPro 3. Trying to save a trimmed clip using "same as first video clip" option. Everything seems to work fine but the saved clip plays for a second and then the video freezes but the audio continues. This happens playing the clip with WMP and VSx6. The original untrimmed mp4 plays fine.
View 14 Replies View RelatedHow can I make a white colour clip the same shade as the white vignette filter.I want to place overlayed images with a vignette onto a white clip on the main video track so that they blend seemlessly in X5.
View 12 Replies View Relatedcertainly the topic has already been covered but with the hundreds of responses I struggle to find it, then propose it a new:
how do I put in the time line already been settled for good, a video clip so that the whole time line moves?
Note: I added the other video clips in many 4-track, not using the main track, which is empty.So should I insert a video clip that I had forgotten about 20 minutes before the end, so you have to move automatically all the work (including effects, subtitles, etc), so it all coincides, without having to move the whole hand. ...
I've been using Videostudio Pro X4 for a few days now and I've seem to have run into the problem of losing the audio of clips after I have muli-trimmed them. It doesn't matter where I multi-trim them in the timeline, after I have confirmed the trim I lose the audio for the clip?
Let me be clear: the audio for the clips work perfectly before any editing ie. trimming and they are placed in the main video track. The clip formats are mainly AVI, MP4 and DivX AVI and have varying lengths.
How to rotate a clip through 90deg?
View 5 Replies View RelatedHow do I delete both the thumbnail and the clip from my computer ? The Delete in the library only deletes the Thumbnail.
I want to clear the unusable files from my computer.
How can I add multiple titles to the same clip, but enter the clip at different times ..?
I am trying to add a title by having "____ production presents..." (fades out) (fades in) "Title of Movie"
I've been using VS 11.5 Plus for several years with no problem. Recently, I received a new camcorder, a Sony HDR-CX305 which produces .MTS files. I can open the files with VLC and Windows Media Player. For editing in VS, I chose to use proxy files. When I put the files on the timeline and play them in project mode, everything is fine (display & sound). But in clip mode, the clip is played really fast, less than 1 second, which makes difficult the editing.. I tried with smart proxy disabled : same problem.
View 4 Replies View RelatedI am a Video studio PROx4 user. Recently, I had some old 8mm films transferred to video and now I'm editing them in Videostudio prox4.
I have a few clips where I want to add sound; HOwever, when I drag the sound clip to the Voice track or the music track, the clip remains silent. The original clip seems to have a audio track already. I can split the audio and the delete the track from the voice track, and then unmute it and re-submit the music track I want to use but it somehow doesn't do the trick.
I'm able to pan and zoom when I put a still image in the timeline, but when I put a video clip, the option is gone?
How do I do what I want to do if I'm simply trying to pan and zoom in a given video clip?
In videostudio x6, How to zoom and pan on a video clip.
View 1 Replies View RelatedWithin a DVD menu I created a motion menu. However I don't want to have the first clip as introductory video for the motion menu. I unmarked the checkbox named "use first clip as introductory video and added, in the first page of the Share - DVD, the clip that must be played in the motion menu (moved the clip most left).
In the menu itself its now fine when nothing is selected, though when selecting the total video to play, the selected video file of the motion menu starts to play where the first video file (clip) must be played. I know that in the main menu I can select the first clip to play as well but that's exactly what I want to avoid..
I removed all chapters since I don't like to have a sub-menu. Just one overall main menu to play the total video, and in the DVD menu in the motion menu only, I want to see (and not select) the chosen clip.
I am usin the trial version of VideoStudio. After a lot of fiddling about (VideoStudio didn't recognize my camcorder) I was able to see my video clips in VideoStudio by placing my memory card in an external card reader. Whilst all the clips appear, VideoStudio informs me that there are no valid video clips.
View 9 Replies View RelatedI shoot AVCHD video from my Canon Vixia HF S 21 at the highest setting of 24 Mbps / 60i. I have a Lite-On BD Burner and make BD-R discs. Originally when creating the movie that will be burned to disc, I was using the Blue Ray option (MPEG2 25000kbps). I was not happy as I saw much degradation of the image. I know from users on this forum that H.264 is the prefered format, but VS X3 limits you to 20000kbps, which will result in an even more degraded image. (Will this limit be removed in VS x5??)
What I found by accident was in the above project, use the option "Same as first clip". This resulted in an H.264 video, VBR 22700 kbps and the video is very sharp on my 55" LCD TV compared to the MPEG2 compression. So I am quite happy with this setting.
My problem is on my project right now, the Same as first clip option is grayed out. Why is this happening? Could it be that this time I captured as real 24F rather than in 60i format? My only option is MPEG2 for BLuRay, or use MPEG optimizer which still shows Mpeg2 but now VBR is 22700 rather than 25000 kbps. There is no way to get it to render as H.264. BTW I also noticed this the other day when rendering a project from video from my wife's Flip camera.
VS ProX4 allows us to rotate a clip by 45 degrees. I need to just sightly rotate it (1 degree or less). It can be done very easily with other editong softwares; I guess it can also be done with ProX4.
View 4 Replies View RelatedI want to reverse a clip in the time line and cant get to the appropriate place to do so in X5.I click the media icon-select the clip in the timeline-click options and the FX screen shows.I am not able to get rid of the FX screen to get where I want to.I have selected the storeyboard view and gone back but still the FX scgreen is the only option.
View 6 Replies View RelatedTrying to take a chunk of frames out of the middle of a clip. The manual says:
"The Navigation Panel is used to preview and edit the clips used in your project. Use the Navigation Controls to move around a selected clip or your project. Use the Trim Markers and Scrubber to edit your clips."
I have done that. Trim Markers set to start and end of frames to be removed. So what is next? Where is the magic button that removes the unwanted frames? Have tried Delete but nothing apparently changes.
While I am at it, how do the scissors work? Can click on them at the start of a series of frames but they become greyed out after that.
Have done a lot of stuff in Windows Movie Maker, which was much more straightforward, but unfortunately it can't cope with HD. VSX3 manual is good at giving you various different ways of selecting frames for deletion, but seems to miss out on the punch line: "now do this to delete them".
Several clips were shot tilted a little bit. Is there a way to correct them? I tried transform, but black background edges showed.
View 1 Replies View RelatedI am trying to split an avi file in the timeline. I split the clip at the required entry point (using the scissors). The 1st part is then marked with a yellow bar. As soon as I move the slider along to get to part where I want to split the clip again (the exit point) - the clip goes black and I can't see it. I if I click on "clip" the clip reappears - but if I click on "project" the section I am trying to cut out goes black again.
View 2 Replies View Related