Revit :: Create Import Into A Random View
Nov 7, 2013Why does every new family I create import into a random view instead of the one I was in?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
ADVERTISEMENT
Revit :: Import Geometry Will Not Be Visible In View Using Current Settings
May 23, 2012I'm trying to import one Revit file into another. When I try to link the file I get a dialogue box that says:
"The import geometry will not be visible in the view using current settings. The Oringin of the import will be centered on the origin of the model instead. You can view the import in any view where its geometry is within the extents."
For this it sounds like the imported model is way off to the side or way up high or low but even in a view that I increase the extents to maximum i can't see the object.
I've tried "center to centre" and "origin to origin". I've check in the visual graphic and can't see anything turned off.
The file i am imported ia a structural model export from Tekla that I imported into a Revit and cleaned up. Everything looks fine when i open the file on it's own.
Revit :: Create Workset By View Level
Jan 8, 2012I'm trying to create workset by view level , for example I need to assign each floor in the building to separated users and by that way I let more people shares in creating one revit model. I create worksets by views but I notice that I still can open any view level and I can add elements . Is there any way to lock the not editable views from opening and adding a new elements and make it secure ?
View 2 Replies View RelatedRevit :: Create A Wall The Has Profile (in Plan View)
Nov 22, 2012I need to create a wall the has a profile (in plan view).
View 1 Replies View RelatedRevit :: Create Non-plottable Line Style That Is Only Visible In Plan View?
Feb 23, 2012Is it possible to create a non-plottable line style that is only visible in a plan view? I want to use something other than the invisible line.
View 3 Replies View RelatedAfter Effects :: Random Image Order In Sequence After Import
Apr 8, 2014When I import images as a sequence in AE CC (v.12.2.1.5), I select an image, then check the 'JPEG Sequence'. Sometimes I have folders that contain missing files, in that I case I also check 'Force Alphabetical Order'.
However, it seems that this is not working correctly now. Some part of the sequence is correct, but there are also some images that appear at random places in the sequence. Is this a bug? What should I do to avoid this?
AutoCad :: Plots Are Plotting Random Edge Of View Which Is On No Plot Layer
Aug 12, 2011can't resolve problem I haven't had before. My plots are plotting a random edge (or two) of my view which is on a no-plot layer.
View 4 Replies View RelatedRevit :: WT - Tile Windows Arrangement Random / Or Logical?
Jul 16, 2010what determines the order in which the windows tile? I can see that the window I have active, goes to the upper left. But I would like to see some consistency that when I hit WT, that all the views go to the quadrant I want the to. Is this random, or logical?
View 5 Replies View RelatedIllustrator :: How To Create Random Non Repeating Pattern
Mar 29, 2013I want to create a pattern that does not repeat (as a backrground). I've tried using swatches but this just repeats the same pattern. If you look at this example below, the pattern (behind the hands, log, etc) looks completely random. How would I go about recreating this effect? Would I need to draw the whole thing manually?
View 12 Replies View RelatedIllustrator :: How To Create Natural Random Stroke Width
Feb 27, 2014I do cartoons and I want to be able to use the pen tool, brush tool and/or even blob brush tool to draw. I'm trying to draw a straight line that has a varied stroke width, so it looks like it's drawn with a felt tip marker or maybe a pencil. The natural random/varied stroke width is what I'm looking for.
I see the "vaiable width profile" drop down box in the tool bar but I only see one option that looks like this (it says "width profile 2" when I mouse over it). Although this varies in width, it's too consistent and doesn't look natural at all. Is there a way to get a varied stroke width for straight lines? I have a pen talet and have tried pen pressure as well but I've not found an easy way to do this.
AutoCAD Civil 3D :: Create Point Group Of Random Points Within Drawing?
Oct 15, 2013Is there a way to create a point group of random points within a drawing and adjust the elevations for the points within that group? Some of the points in the group may have been manually created and some may have been imported by way of "Import Events"..
View 3 Replies View RelatedRevit :: Plan View Tags Referencing Wrong Dependent View?
Jan 10, 2012We have our first project in Revit that we are having to split among multiple sheets because of the size of the building, so I have made 3 dependent views from the main overall view, named them, cropped them and placed each part (A,B, and C) on separate sheets. Now that I am trying to do enlarged toilet plan views, I want to tag the plans with the plan callouts on the 1/8” sheets that are the dependent views, but all the view tags are referencing dependent view A since it is the first dependent view in the list. If I change sheet A to be named Sheet X for instance, all the view tags now reference sheet B since that becomes the first dependent view alphabetically. I want them to reference the sheet they appear in, but I can’t seem to figure out how to do that, even though they are in different dependent views completely and within the crop region, they all default to the first dependent view in alphabetical order.
View 4 Replies View RelatedRevit :: Rendering 3D View - Roof Disappears In The Render View
Feb 18, 2011I am a new user to this may seem simple. When I render a 3D view the roof disappears in the render view, but when I switch to show the model it is there.
View 6 Replies View RelatedRevit :: Resetting View Clip / New Elements In View
Feb 9, 2014I have a 3D view and when I turn on the clip boundary everything disappears, which leads me to believe that the clip boundary is off to the side somewhere. I zoom out & out, but can't find it.
Is there a way of resetting it? I could just make a new view, but I'd have to set the perspective again.
In this view I have hidden all the objects except for the one (a book case) that is being detailed. Every time I model something new it shows up in this view. Is there anyway of stopping new objects showing in a given view?
Revit :: Camera View In Plans (View Reference)
Sep 4, 2012Why Camera Views is different from all other views in Revit. It is simple not possible to add a view reference, or a tag etc. to reference to a camera view.
Of course I can put in a 'dead' symbol to show where it is in plans, but that's simply not the same...
Revit :: How To Keep View Same But Change Scale Of View / Perspective
Jun 18, 2012I am working with a seris of 3d views that I want o make bigger. How can I do this.
I want to keep the view the same but changed the "scale" of the view/perspective
Revit :: View Title Is Gone Can't Select View
Apr 29, 2013I have a sheet with views on it. For some reason I can't select one of the views. I can't activate it. And the view title is gone. I can go to the browser and find it under the sheet and then go to open.
View 1 Replies View RelatedRevit :: View Range Of All Other View Types
Jan 17, 2013Having been on Revit for more than 8 years there's nothing more difficult to explain to a new user than how the View Range functions. It's one of the first features one must deal with with Revit and yet it can yield illogical results without proper use. The #1 youtube video on Revit's View Range is 20 MINUTES long! Here's my top reasons why View Range is illogical:
1. It does not behave like the "view range" of all other Revit view types. Sections, Elevations, 3d views are all based on a simple concept, a direction, and a 3 dimensional bounding box. With floor plans, elements can appear (or not appear) in a floor plan that is clearly cut so that they shouldn't if the user doesn't understand the rules (and there are lots).
2. It has "Additional View Range Rules" (or exceptions to logic), 7 in fact, which takes Revit Wiki over a page to describe. Each rule is complicated and very situational. No other Revit view types have exceptions. Why floor plans need to have special exceptions is absurd and political. These exceptions must also slow down regeration time of the model since it must process different groups of elements individually to determine their view state in the floor plan.
3. Modern architecture does not adhere to simple boxy shapes and user's need to trust that their view range is actually cutting the surface as they see it. No exceptions or special rules.
4. View Range has a Top and a Cutting Plane elevation. It is completely illogical for any element to appear above the cutting plane. This can easily lead to misinterpretation of 2d drawings because some elements may not appear in section even though they are above the cutting plane. Views should have a cutting plane, direction (up or down in this case) and a depth. Simple, just like all other Revit views.
5. The View Depth "range" is rarely used effectively. The only practical use is to show low roofs of buildings with higher roofs, or possibly foundation elements. Scope boxes or Underlays can accomplish this task much simpler. All the additional line-styles that accompany View Depths are just unnecessary and add more things for the user to manage. It's time to kill View Depth.
It's in Autodesk's best interest to make Revit a user-friendly application. This is one area that needs attention. Keep Revit easy to use without having to watch a 20 minute video.
AutoCAD Civil 3D :: How To Create A Section View For A Pond Other Than Quick View
Oct 1, 2012how to create a section view for a pond other than quick view.
View 2 Replies View RelatedAutoCAD 2013 :: Create Layout View Using View Manager In Paperspace?
Jun 18, 2013I am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
AutoCAD Inventor :: Create Detail View Of Isometric View In IDW?
Oct 3, 2013Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View RelatedAutoCAD Inventor :: Create Detail View Of ISO View?
Oct 3, 2013is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies View RelatedAutoCAD Map 3D :: Import / View ADF Files
Jan 11, 2013I want to import / View ADF files (ArcGIS files) in Autocad Map 3D 2009 version. Does it supports this function or need to check in latest version.
View 1 Replies View RelatedAutoCad :: Import MS View From Another Drawing?
May 30, 2011Can copy/import a Modelspace View from one drawing to another, sort of like using the Design Center to import layers, blocks, layouts, etc?
View 2 Replies View RelatedLightroom :: Can't View Or Import Video (4.4 And 5)
Aug 3, 2013I have a problem with my PC. I cannot view or import video in Lightroom.
I have tried both Lightroom 4.4 and 5, with same results.
I have video in these formats: mts, mov and mp4, and they all have the same problem.
I properly have done some "adjustments" of my PC, but cannot find out what has caused the problem.
Description:
In the Import window, I see this message "Preview is unavailable for this file". After I press Import, I get this message: "Video support is disable"
For those movies already importer, I can move the cursor over the movie, and view "fast replay" of the movie. However, the play button do not show.
Pressing spacebar only zoom. As do double-click. I can view the videos using QucikTime or Media Player.
I am using Windows 8 64 bit.
Revit :: How To View All Fonts
Aug 18, 2012Working on a title sheet (i.e., a logo, and it includes fonts selections) and I can see each font individually on the list of fonts drop down on the System Family dialog, but I wonder if there is a way to see them physically all at the same time somewhere so I could compare each style side to side and see what each looks like at the same time. How or where I see all the fonts included in Revit all at the same time?
View 1 Replies View RelatedRevit :: How To Print To PDF A View
Mar 3, 2014When attempting to print to PDF a view from Revit, I am running into an interesting problem: in preview, the image displays properly, but when the file generates, it is blank, with the exception of black lines on each side of the page.
View 1 Replies View RelatedRevit :: DWG On Drafting View
Aug 25, 2013I have a DWG Site Survey already inserted in my project, but need to place it on a Drafting View sheet to further add annotation. How this is done?
View 2 Replies View RelatedLightroom :: Photo Greyed Out In Import View?
Dec 3, 2013I have a jpeg on my desktop which I want to import into Lightroom but the photo is greyed out in the Import view. How do I import a greyed out photo?
View 3 Replies View RelatedRevit :: Visibility By Level In 3D View?
Mar 9, 2012Is there a way to set the visibility of elements in a 3D view according to the Level they are associated with?
The VG tab which opens the filter dialog provides a check box for the "Levels" category, and the relevant parameters are made available.
But I can not seem to create a filter rule which evaluates any of those parameters (name, elevation, etc...) to then isolate the visibility of those elements in the 3D view that either meet, or do not meet the criteria. Nothing seems to work.
To achieve a "similar" effect in a 3D view, I can use a Section Box, but that is a very clunky and imprecise way.I can also create a Shared Parameter for "Level" and perhaps filter successfully that way, but that seems redundant with the Levels intelligence already established.
Revit :: Underlay RCP From A Link View
Jul 10, 2013I want to show a linked view from another proyect that has an underlay ceiling plan,I'm using By linked view option to show exactly the same view from the original project but the underlay RFP doesn't appear. I just want to show the outline of some skylight diffusers from the ceiling plan.
View 1 Replies View Related