AutoCad :: Import MS View From Another Drawing?
May 30, 2011Can copy/import a Modelspace View from one drawing to another, sort of like using the Design Center to import layers, blocks, layouts, etc?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Parent Section View In One Drawing And Child View In Another
May 6, 2013Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedAutoCAD Inventor :: Projected Drawing View Doesn't Show / Design View Rep Don't Update
Sep 27, 2013After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
AutoCAD Inventor :: View Label In Base View / Drawing?
Nov 25, 2008Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies View RelatedAutoCad :: Architectural Drawing - Levels Show In Model View But Not In Drawing?
Sep 14, 2011The layer is on and the ground levels on the architectural drawing in model view show the number and the box surrounding them however in the drawing window be it in the numbers have dissapeared and we are left with only the boxes ?
View 3 Replies View RelatedAutoCAD Civil 3D :: Opening Drawing In 2013 And Drawing View Changes?
Nov 28, 2012Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View RelatedAutoCAD Map 3D :: Import / View ADF Files
Jan 11, 2013I want to import / View ADF files (ArcGIS files) in Autocad Map 3D 2009 version. Does it supports this function or need to check in latest version.
View 1 Replies View RelatedAutoCad :: Using X-Ray View In Drawing
Apr 10, 2013I need to use x-ray view in a drawing. But still i using autocad 2007. There is no visual styles [View > visual styles > manage visual style] for x-ray. But there is some option to create different visual styles. Can i make x-ray view with these option? require settings for x-ray view.
View 4 Replies View RelatedAutoCAD Inventor :: Import Scale Of View Into Title Block?
Oct 7, 2012How to import scale of view into a title block?
View 1 Replies View RelatedAutoCAD Civil 3D :: Import Alignment And Profile View Disappears?
Aug 8, 2013We are working together with another firm here in town. The are doing the road and we are doing the utilities. They have established the alignments and profiles. When I import them all the data comes in. For whatever reason I do not have their profile views so I create my own profile view and put their profiles in them.
When they send an updated .xml file of all the alignments and profiles, they import okay but my profile views disappear. I assume it's because in their .xml file that I import, there are no profile view defined.
Is there an options when you export and alignment to an .xml file that you can include the profile views with it as well? This way when I import them I would get them.
AutoCAD LT :: Old Drawing - View Rotation
Nov 28, 2011I am working on an old drawing with 2007 LT. When I draw a horizontal line in modelspace, It shows as a vertical line in a viewport of the layout.
In modelspace, when I type UCS, z, it shows angle about z is 90 degree. I can chang it to 0 here. But still the the line in the view is not rotate back.
How is this set up? How could I rotate back in the view?
AutoCAD Inventor :: Pin View In Drawing
May 9, 2013I'm working on a Isometric drawing and im trying to dimension the view. I keep the original view there and cut another of the same view and place that cut view over the original, so I have something to snap to while dimensioning.
Every time i go to place the cut view over the original and i always grab the wrong view and move it and I am wondering if there is a way to pin the original view in place permanently?
AutoCad :: Rotate Drawing In View?
Oct 17, 2006I have a drawing in dwg that's drawn vertically. By that i mean the texts seem to have been rotated at 90 degree. It's drawn by someone else. I darenot rotate it back fearing i might stuff up the coordinates. But it's hard to see as i need to bend my head to be able to read the drawing and all the texts in it.
Is it possible that without rotating the actual drawing, we can actually somehow set it to something more readable for example, rotate it back to vertical kind of angle. I heard it can be done with view. But i just don't know how to do that.
I use autocad LT 2005.
AutoCAD Inventor :: Make A View In A Drawing?
Sep 6, 2013Is there a way so that when I make a view in a drawing,
it shows up by default with all it's real lines, instead of having to select the options all the time...
AutoCAD Civil 3D :: Rotating View Of A Drawing
Oct 10, 2012My company has just upgraded from stone age AutoCAD to Civil3d 2013 and I've been tasked with figuring out the program.
What I am trying to do is realign my drawing so a line I drew is horizontal to the page. For example, I have a line at a 45 degree angle and I want to rotate my viewport so that line is now at a 0 degree angle. Is there a simple way to do this?
A follow up: I have my point labels set to be a 45 degree angle, will they be at a 45 degree angle when I realign the drawing or will they "rotate" along with the drawing?
AutoCAD Inventor :: Copy View From One Drawing To Another?
Jan 31, 2012For inventor drawing, is that possible to copy a view from one drawing to another different drawing?
View 2 Replies View RelatedAutoCAD Inventor :: Drawing - View Between Two Planes?
Sep 11, 2013i have assembly and i want make drawing of part of it. Part of assembly i want to show/draw is between two parallel planes. How can i do this?
I'm using inventor 2010.
AutoCAD Civil 3D :: Drawing Initial View
Jun 5, 2012When opening a drawing, since I've installed 2013, I don't have an initial view or preview of the drawings I'm selecting. In the open box, the "Initial View" or "Select initial view is unchecked and won't let me put a check mark in so I can review the drawing before opening.
View 9 Replies View RelatedAutoCad :: Can't Zoom In / Unable To View Drawing
Nov 13, 2011I can't zoom in on the autocad these drawing coordinates are 8.00E+39,0000 -7.00E+39,000...i can't saw my drawing.
View 1 Replies View RelatedAutoCad 3D :: Zoom Out To View Entire Drawing
Mar 11, 2012Just recently I got a chance to try out Autocad 2012. I modeled up an assembly. I then wblocked my individual details into separate files for detailing. I used the new drawing view tool to create my isometric views. The issue I am having is the outer most edges of my views is not being shown all the time. If I zoom in the edges appear, but when you zoom out to view the entire drawing, the edges are no longer visible. It is like the border around the view that the drawing view tool creates is not offset far enough. How to use the new drawing view tool?
View 9 Replies View RelatedAutoCAD 2010 :: How To Add Drawing View Panel
May 31, 2012I have observed that I don't have the "Drawing View Panel" under the Annonate Tab. Try to right on the Annonate tab and go to show panels but the Drawing View panel is not on the list. How to add the Drawing View Panel?
View 4 Replies View RelatedAutoCAD Inventor :: Drawing View Won't Update?
Jan 3, 2012I've got a macro which is creating .ipt and .idw files from templates. I'm once created I'm replacing the reference in the .idw to refer to the newly created .ipt file. The problem is that the drawing view isn't updating... I've make the .ipt file dirty then udpate the drawing, but that hasn't worked. I've tried just using the drawingdocument.update function, but that hasn't worked either...
View 6 Replies View RelatedAutoCAD Inventor :: Sectioned View Rep And Drawing
May 31, 2011I have a 3/4 sectioned view rep (Locked) in an assembly. On a drawing, When I select the correct view rep,
- I don't get the save view orientation ( though It show/hide the correct parts). I was expecting this because I had locked in 3D
- I don't get to see the 3/4 section.
AutoCad 2D :: Xref One Drawing Into Other And View Scale Changes
Aug 22, 2013How does it work? I see in the properties after I high lite it. Annotative Scale no/yes. We xref one drawing into other drawing and the view scale changes. will my hatch look the same or will the smaller view scale look really big in the drawing.
View 1 Replies View RelatedAutoCad :: Generate Isometric View Of Drawing?
May 25, 2011My boss said i could generate an isometric view of a drawing if i have the plan, elevation, and side views (makes sense enough). how do i go about doing this? is there an existing thread i can be forwarded to? (searching "isometric" didn't seem specifically useful.)
View 9 Replies View RelatedAutoCad :: Inserting Images To Drawing - Cannot Only See From Top View
Jul 23, 2011When I insert and image to my Autocad drawing for some reason I can only see the image from a top view. I change the view from top to left so I can try and rotate the image so I can see it from the front view. I am not sure what to do.
View 2 Replies View RelatedAutoCAD Civil 3D :: Import From Drawing
Jun 15, 2012I am trying to import points from drawing, but I cant select any of the points and i can not find any information out there about how to import them. How to import from a drawing?
View 9 Replies View RelatedAutoCad :: How To Import JPEG Into Drawing
Sep 26, 2011I tried to use the "import" under file, but it didn't see the jpegs that I want to import. In fact, it didn't see anything that's in the file. It said "file empty".
View 3 Replies View RelatedAutoCAD Inventor :: Rotate Drawing View Using ILogic
Jul 11, 2013Is it possible to rotate a drawing view using iLogic?
View 2 Replies View RelatedAutoCAD Inventor :: Drawing View Associative Selection
May 24, 2012In the continuing persuit to learn Inventor, of this selection in the drawing view editor?I have noticed one thing. When it is checked it turns off the visibility of parts within an assembly view.
View 9 Replies View RelatedAutoCAD Inventor :: Orient Drawing View By Surface
Oct 18, 2011I have an assembly that is derived from a solid body part. The assembly can rotate in the part hence the .iam that was created using Make Components also rotates. The trouble is I need to make a template drawing showing the assembly in the same position all the time.
Is there a way to make a base view always look at a surface and follow that surface so that the view on the drawing always looks the same?
For example: If I had a dice and I create a base view of the two dots side of the die. If I roll the die I still want to see in the base view the two dots side of the die in the same orientation.