I have a building file with a site linked in. The site file has the retaining wall etc.
In the building file I have created some camera views and when you adjust the eye height the linked wall is distorted. note the correct alignment in perspective-01 and the distortions in *-02 & *-03.
Why Camera Views is different from all other views in Revit. It is simple not possible to add a view reference, or a tag etc. to reference to a camera view.
Of course I can put in a 'dead' symbol to show where it is in plans, but that's simply not the same...
I tried to plot a 3D view to pdf but I have strange shadows on the pdf file.
In revit it shows everything correct but on the pdf there happened something wrong.
I read the other articles about putting it to Raster Processing but that doesn't work.
Raster quality is on presentation (highest possible).
I printed with a cute pdf printer.
I'm currently Building a Library Technology Hub that has 3 story atrium. I'm trying to create a 3d camera view that shows the multiple levels that open to the atrium. However, only the 1st floor and mezanine floor (within 1st floor ceiling heights) are in my 3d view. The rendred view shows as if I have a solid ceiling across the entire 1st floor. I am almost positive that this is an issue with my camera settings since my 2nd and 3rd floors are cut around the atrium opening. I have clicked on almost every option in my properties menu and am at a loss!
Just btw, I'm an intermediate level, self-taught revit user (I have used it on a daily basis for about a year now). I'm no guru, but I'm quite savvy on making things work like I want them to.
I have attached a test render of the space. the "ceiling" should be open above my mezanine, and extend to desk at the right and the lounge seating at the left. However, it has rendered as a single plane.
How to correct camera distortion in 3dsmax design 2011 ? Rendering with mental ray .
View 4 Replies View RelatedI'm new to Photoshop. Currently, Im learning Photoshop through Adobe Photoshop CS6 Classroom in a Book. I found out that the camera raw plug-in seems weird.
This is the original photo.
When I opened it in Camera Raw, the color of the photo distorted. ( I didn't do anything on it yet. )
Is it caused by software problems? Or did I accidentally tick something in the Setting/Preferences?
I need to add barrel distortion to a 3ds max camera.
using 2014
I'm creating 3D architectural models; primarily interior views. I use the ANIPATH command quite frequently and I'm good there.
However, I have not been able to render a still camera view that shows the lighting and resultant shadows. Whenever I attempt to render a still from a particular camera; I set it to realistic. It shows the 3D objects with materials; however not the lighting.
I've been using ACAD for about 15 years now, and consider my skill level upper-intermediate.
So far, the only successful still renderings I've been able to do are those directly associated with the typical ortho views: i.e., NE, NW, SE, SW, front, back, etc. But no avail on rendering from the camera point of view.
I take a number of cemetery headstone photos and in trying to keep my shadow off the headstone, I stand to the side and the image usually gets distorted. I have Photoshop Elements 11. I'm sure there is a good way to do it. I tried Filter, Correct Camera Distortion but end up with a worse distortion than when I started.
how do I improve my photo image and make it more square?
How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?
View 2 Replies View RelatedMy transparent materials are being pushed to the front of 3d view in Revit 2013, how can I fix it?
View 1 Replies View RelatedI've placed the Multi-Segmented Grids in my large project that requires (6) dependent views per floor plan. In each of the dependent views, I'm trying to get the grid markers to show at the ends that ~I~ want them to show, but I'm not getting the checkbox.
Is this by design? Or is it a bug?
leaving the isolate mode in a camera view (3dsmax-camera or vrayphysical-camera) changes the view from cameraview to perspective view. Am I missing any new setting or ist this a bug...
View 3 Replies View RelatedI created this using Gimp 2.6 on Mac 10.5: [URL].......
When I resize this to a smaller image, the text gets all distorted: [URL]......
I have been looking around on Google, but couldn't find much.Tried scaling with all the different ways (Linear, Cubical... etc). Also tried scaling from XCF and PNG files. Nothing seem to maintain the quality of the text on the image.
We have our first project in Revit that we are having to split among multiple sheets because of the size of the building, so I have made 3 dependent views from the main overall view, named them, cropped them and placed each part (A,B, and C) on separate sheets. Now that I am trying to do enlarged toilet plan views, I want to tag the plans with the plan callouts on the 1/8” sheets that are the dependent views, but all the view tags are referencing dependent view A since it is the first dependent view in the list. If I change sheet A to be named Sheet X for instance, all the view tags now reference sheet B since that becomes the first dependent view alphabetically. I want them to reference the sheet they appear in, but I can’t seem to figure out how to do that, even though they are in different dependent views completely and within the crop region, they all default to the first dependent view in alphabetical order.
View 4 Replies View RelatedI am a new user to this may seem simple. When I render a 3D view the roof disappears in the render view, but when I switch to show the model it is there.
View 6 Replies View RelatedI have a 3D view and when I turn on the clip boundary everything disappears, which leads me to believe that the clip boundary is off to the side somewhere. I zoom out & out, but can't find it.
Is there a way of resetting it? I could just make a new view, but I'd have to set the perspective again.
In this view I have hidden all the objects except for the one (a book case) that is being detailed. Every time I model something new it shows up in this view. Is there anyway of stopping new objects showing in a given view?
I am working with a seris of 3d views that I want o make bigger. How can I do this.
I want to keep the view the same but changed the "scale" of the view/perspective
I have a sheet with views on it. For some reason I can't select one of the views. I can't activate it. And the view title is gone. I can go to the browser and find it under the sheet and then go to open.
View 1 Replies View RelatedHaving been on Revit for more than 8 years there's nothing more difficult to explain to a new user than how the View Range functions. It's one of the first features one must deal with with Revit and yet it can yield illogical results without proper use. The #1 youtube video on Revit's View Range is 20 MINUTES long! Here's my top reasons why View Range is illogical:
1. It does not behave like the "view range" of all other Revit view types. Sections, Elevations, 3d views are all based on a simple concept, a direction, and a 3 dimensional bounding box. With floor plans, elements can appear (or not appear) in a floor plan that is clearly cut so that they shouldn't if the user doesn't understand the rules (and there are lots).
2. It has "Additional View Range Rules" (or exceptions to logic), 7 in fact, which takes Revit Wiki over a page to describe. Each rule is complicated and very situational. No other Revit view types have exceptions. Why floor plans need to have special exceptions is absurd and political. These exceptions must also slow down regeration time of the model since it must process different groups of elements individually to determine their view state in the floor plan.
3. Modern architecture does not adhere to simple boxy shapes and user's need to trust that their view range is actually cutting the surface as they see it. No exceptions or special rules.
4. View Range has a Top and a Cutting Plane elevation. It is completely illogical for any element to appear above the cutting plane. This can easily lead to misinterpretation of 2d drawings because some elements may not appear in section even though they are above the cutting plane. Views should have a cutting plane, direction (up or down in this case) and a depth. Simple, just like all other Revit views.
5. The View Depth "range" is rarely used effectively. The only practical use is to show low roofs of buildings with higher roofs, or possibly foundation elements. Scope boxes or Underlays can accomplish this task much simpler. All the additional line-styles that accompany View Depths are just unnecessary and add more things for the user to manage. It's time to kill View Depth.
It's in Autodesk's best interest to make Revit a user-friendly application. This is one area that needs attention. Keep Revit easy to use without having to watch a 20 minute video.
I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View RelatedI am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies View RelatedIs it possible to automatically insert centrelines in projected views when using the base view command?
I believe it is possible with Inventor.
Using Autocad 2014
I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?
View 1 Replies View RelatedIs there a way to have no view transition when changing views with the view cube? I'd prefer that it just switch to the desired view instantly with no transition.
View 3 Replies View RelatedWhen making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.
View 3 Replies View RelatedI am doing some detail work in a camera viewport, is there a way to zoom into the view? Not move the camera, just make an area larger so I can better animate objects.
View 5 Replies View Relatedi have ps cs5 ,but i have just bought a nikon d5200 and i can not view my photos from this camera.
View 4 Replies View Relatedwhen using the ViewCube to rotate the camera around and get a different view, it seems to either have a mind of its own or centered on 0,0,0. I've been working on a project for awhile and when I'm editing and have something selected the camera rotates like it should but doesn't focus on what I have selected and sometimes it does. Does this camera rotate and move around the complete center(x:0, y:0, z:0) or am I missing something? I haven't seen anything posted about it so it may just be me but it is frustrating when you are working on a project and have to pan the camera around, zoom out if need be and find the spot you are working currently almost every time.
View 1 Replies View Relatedmax always crashes, when i start creating a target camera in one of the 2d-views. In perspective everything is ok.
View 1 Replies View Related