3ds Max :: Zoom Into Camera View
Dec 6, 2011I am doing some detail work in a camera viewport, is there a way to zoom into the view? Not move the camera, just make an area larger so I can better animate objects.
View 5 Replies
ADVERTISEMENT
3ds Max :: How To Zoom In On A Section Of Camera View
Jan 22, 2012I've taken a shot of a building. I'm setting up a scene that has a realistic camera lens distance and focal length taken from measurements at the architectural location. I'm creating a mesh to go over that image and it has to line up with the photo perfectly.
There are small details on the building that I need to extrude but even in full frame view on my 30" monitor I can't get close enough. If I change to a perspective or front view to work zoomed in the mesh is off when I go back to my camera view as the perspective distortion, small as it is, is different than a front or perspective view.
Is there a away to zoom in on a section of a camera view so that I can keep working on my mesh using the camera's perspective and view distortion?
3ds Max Design (3D Studio thru Max 2014), ASUS P9X79 Motherboard,
Intel i7-3960x, Hydro H80 CPU Chiller, 32GB DDR3 Ram,
Quadro 4000 Display Adapter
Revit :: Camera View In Plans (View Reference)
Sep 4, 2012Why Camera Views is different from all other views in Revit. It is simple not possible to add a view reference, or a tag etc. to reference to a camera view.
Of course I can put in a 'dead' symbol to show where it is in plans, but that's simply not the same...
3ds Max :: Exit Isolate From Camera-view Changes To Perspective View?
Jul 10, 2012leaving the isolate mode in a camera view (3dsmax-camera or vrayphysical-camera) changes the view from cameraview to perspective view. Am I missing any new setting or ist this a bug...
View 3 Replies View RelatedAutoCAD Inventor :: Why Does The Zoom Change When Add Camera Action
Oct 8, 2009I'm using inventor 2010, In studio mode, I adjust the zoom or view that I want my camera to end with, when I click "Add camera action" bottom, that zoom change in or out,
View 1 Replies View RelatedAutoCAD Inventor :: Camera And Eye - Cannot Find Property Related To Zoom
Jul 28, 2013How to zoom in and out via the API.
I can access the camera and eye etc. but cannot find the property related to zoom. I initially thought it was to do with the position of the eye but when I use the "Zoom" by dragging the mouse button I see that the eye position doesn't change.
I would like to connect the zoom to a slide bar and zoom in and out using that.
Photoshop :: Camera Raw 7 Slow Zoom In / Out But Fast Process 2003 Or 2010
May 6, 2012I did notice that zoom in or out in camera raw is slow , even in middle pc , i'm not talking about hi end pc but i did find it's amazing fast if use process 2003 or 2010. May i use like default the 2003 or 2010 ? How can i do it?
View 5 Replies View RelatedAutoCAD Inventor :: Studio - Unintended Zoom Out When Pressing Add Camera Action?
Mar 25, 2013I am making an animation in Inventor Studio. I have created all my sequences for fading and constraint animations, and now I only need to move the camera around my assembly while zooming in and out with focus on the animations.
The way I have done it so far, is as following: Created a camera (Camera1).Set my view where I wanted the camera to start.Rightclick on Camera1 and set camera to view.Then go in a few seconds on my timeline, move my view to a new area and finally "Add camera action". I've done this a couple of times with success, but now I can't do it again.
As soon as I move my view to another area, and press "Add camera action", it does as intended, but now it zooms out, making the animated area small and hard to see. I want it to be zoomed in on a detailed area, but it's changing the view to the whole assembly.
Photoshop :: What Is Going On With Zoom / View Function With 13.0.3
Jan 1, 2013I just installed 13.0.3 upgrade for 64 bit and now when I resize an image to, say 800 x 600 pixels, the resulting image is very small. To get the image to display in the window at the same size (100%) as before the upgrade I have to zoom to 200 - 300%, and get the associated pixelation. Nothing else on the computer has changed (i.e., display preferences) to my knowledge. I am using a rMBP running OS X 10.8.2. what 100% zoom looks like now, which is about 1/3 the size an image like this used to be prior to the upgrade.
View 3 Replies View RelatedAutoCad :: Cannot Zoom A View In New Layout
Apr 14, 2011I have just switched from Pc to Mac with AC. Not sure if its the platform change, or the later version, but I am having problems doing things I used to have no problems doing!
I have duplicated a layout, but when I click on the inside of it it wont make it active and allow me to zoom the view.
If I create a new layout, I can click inside and zoom, however, in this instance, its quick for me to duplicate and re-zoom, if only I could I have tried the MV > L > off command, but that is wanting me to select an object, and not unlock the whole layout. Same thing if I hit the lock or freeze button on the right hand tool panel.
CorelDRAW X5 :: Zoom To Previous Or Preset View?
Mar 10, 2011Is there a way in CorelDRAW to zoom to the previous zoom position?
Is there a way to zoom to a preset zoom position?
AutoCad :: Can't Zoom In / Unable To View Drawing
Nov 13, 2011I can't zoom in on the autocad these drawing coordinates are 8.00E+39,0000 -7.00E+39,000...i can't saw my drawing.
View 1 Replies View RelatedAutoCad 3D :: Zoom Out To View Entire Drawing
Mar 11, 2012Just recently I got a chance to try out Autocad 2012. I modeled up an assembly. I then wblocked my individual details into separate files for detailing. I used the new drawing view tool to create my isometric views. The issue I am having is the outer most edges of my views is not being shown all the time. If I zoom in the edges appear, but when you zoom out to view the entire drawing, the edges are no longer visible. It is like the border around the view that the drawing view tool creates is not offset far enough. How to use the new drawing view tool?
View 9 Replies View Related3ds Max :: Zoom About Mouse Settings In View Ports
Apr 13, 2012Can't find the controls for zoom about mouse in the view ports.
Do not see a mouse tab in preferences.
CorelDRAW X6 :: Auto Center View With Scroll Zoom
Nov 27, 2012I have become very attached to having the mouse scroll wheel 'auto center the view at the cursor point' when I scroll in and out...I am not too happy with the new 'hold the wheel down and move the screen position' feature on x6. Can the old wheel configuration/centering be activated in x6?
View 5 Replies View RelatedCorelDRAW X4 :: Zoom In On Page And Print Current View
Aug 31, 2011 if theres a way to zoom in on a page and print only what you see
in your zoom(on the Screen). Something like Acrobat
AutoCad :: Crosshair Disappear In Isometric View When Zoom In
Sep 21, 2010when i started using 2011. I have 2 viewports active; plan and isometric view. But when I try to navigate in the isometric view, the crosshair behaves in a way I don't understand. What happens is that when I zoom in the crosshair disappears over or under what I'm zooming in on.
It's hard to describe, but it seems that it have a different origo then the view represents. When I zoom out so much that the crosshairs are visible and I try to move them upwards, they stop in the middle of the screen and then the marker becomes visible in the ribbon part of the screen.
I have tried detaching all xref's, purged and audit, checked the elevation (0). This only happens in some drawings, not all, and I can't think of a common denominator in the drawings it happens.
AutoCAD Inventor :: Perspective And Orthogonal View - Not Able To Zoom In
Jul 25, 2013After setting up a scene with a JBL lighting environment, I changed from orthogonal to perspective view for rendering.
Funnily I was not able to zoom in with perspective view activated. Zooming slows down and finally comes completely to halt. Switching back to orthogonal the camera jumps right into the object. Changing back I see everithing from a distance.
Is this normal or is this an error. I can´t remember if this happened before.
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
- Factory Design Suite Premium Subscription-
Photoshop :: Zoom Out Near Edges Results In View Area Jump
Feb 26, 2008I have observed an unexpected behavior of mouse wheel zooming in CS3:
using the mouse wheel: when i zoom in (very closely) to some location near the image edges/corners and then zoom out /once/ (i.e. one mouse wheel "click"), the image zooms out and simultaneously the viewed region jumps a little towards the image center. this is kind of annoying since one has to move the image to see the desired location after zooming out a little.
Lightroom :: Zoom / Loupe View Much Slower To Render Than Capture One?
Feb 21, 2014I've been tethering to Capture One with a Phase Back then having Lightroom Autoimport the files which works well. The biggest problem I have is that when I want to check focus as I go along and I zoom in on the files in loupe view Lightroom is really slow at rendering up the image. It seems to get slower as the catalogue fills up until it just wont do it. Then if I quit Lightroom and restart its better for a while then slows down again.
Both applications are running on the same Macbook Pro with The latest OSX.
However looking through the files in Capture One they zoom up in size with hardly any delay. I understand that Lightroom has to render a larger preview which is taking the time but surely Capture One has to do this too but doesn't seem to need to take anywhere near as much time to do it. In the case of Capture One it seems to be able to zoom into files that it hasn't previously loaded so there must not be a pre existing preview there.
Lightroom :: 5.3 - Can't Double Click Zoom In Loupe View Anymore
Apr 5, 2014I used to be able to double click on an image in Loupe view in Library mode and I would zoom into that image. I think that stopped when I got to LR5, I'm in 5.3 now. Now when I double click in Loupe view, I'm back out to grid view. Drop down menu suggests I just need to hit return, same thing happens. This happens at all zoom levels fit, fill, 1:1, etc. I'm running OSX 10.9.2. Sounds like a setting issue, but I've looked.
View 1 Replies View RelatedAutoCAD 2013 :: Viewcube Rolling - Zoom To Extents After View Change Box
Jun 13, 2013I am having a small but annoying problem with the viewcube in AutoCAD 2014. In all the previous versions that had the viewcube, when I unchecked the "Zoom to Extents after view change" box, the view would pivot about the center of the screen. Now it seems to pivot about an arbitrary point an I have to zoom_e anyway.
View 8 Replies View RelatedAutoCAD Civil 3D :: Open Xref In Selected Layout And Zoom To Match View
May 29, 2013I have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstation is the ability to select and open an external DGN reference, and then match the view of the parent DGN, called the "EXCHANGE" command. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experiment with lisp or script and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, I have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature. I hesitate using the REFEDIT, which works fine for regular AutoCAD, but not so much for Civil 3D and the objects it creates (labels and other items with data shortcuts).
AutoCAD Visual LISP / AutoLISP :: Open Xref In Selected Layout And Zoom To Match View?
May 28, 2013I have used Autocad since 1991, and my current job required me to use Microstation. One feature I liked from Microstaiton is the ability to select and open an external DGN reference, and then match the view of the parent DGN. In AutoCAD, you can also select and open an xref, but the DWG opens to the previous saved view, and not to the desired view that matches the layout.
My thought was to experienting with lisp or scipt and export the "Viewctr", "Viewtwist" and "Viewsize" variables to a text file, then importing the text file and using the "Viewtwist" as my "SNAPANG" value, then "Viewctr" as my "ZOOM, CENTER" value, and finally the "Viewsize" as the "Enter magnification or height:" value.
But, alas, have no time, and not quite the knowledge to duplicate MicroStation's open-xref-and-zoom-to-view feature.
Photoshop :: CS5 - Cannot View Photos From Camera?
Oct 26, 2013i have ps cs5 ,but i have just bought a nikon d5200 and i can not view my photos from this camera.
View 4 Replies View Related3ds Max :: ViewCube To Rotate Camera Around And Get Different View
May 22, 2011when using the ViewCube to rotate the camera around and get a different view, it seems to either have a mind of its own or centered on 0,0,0. I've been working on a project for awhile and when I'm editing and have something selected the camera rotates like it should but doesn't focus on what I have selected and sometimes it does. Does this camera rotate and move around the complete center(x:0, y:0, z:0) or am I missing something? I haven't seen anything posted about it so it may just be me but it is frustrating when you are working on a project and have to pan the camera around, zoom out if need be and find the spot you are working currently almost every time.
View 1 Replies View Related3ds Max :: Crash When Trying To Create Camera In 2D View
Nov 8, 2012max always crashes, when i start creating a target camera in one of the 2d-views. In perspective everything is ok.
View 1 Replies View Related3ds Max :: Create Camera From View (ctrl C) Not Available
May 20, 2011For some reason, the function "Create Camera from view (Ctrl+C)" is not available (in grey). I usually set my camera that way.
why is the function not available?
Photoshop :: Can Connect Camera And Take Pictures And View Them In Cs5
Jul 10, 2012I am using a nikon 5100 dslr camera and I have the correct leads and I am using photoshop cs5.
View 2 Replies View RelatedPhotoshop :: View Pictures From My Camera In Bridge
May 15, 2005Was just trying to view pictures from my camera in Bridge and more than half of them in this one directory aren't showing thumbnails or EXIF data, just the CR2 icon and incorrect creation date and time (they were all shot the same day, most within minutes of each other, yet they're a week off). If I double click on the icon, the image opens up correctly in the CR2 plug-in. They worked before, I've opened and closed Bridge and PS, I've purged the cache, but it's still not working.
View 9 Replies View RelatedRevit :: 2013 Camera View Distortion?
Apr 26, 2012I have a building file with a site linked in. The site file has the retaining wall etc.
In the building file I have created some camera views and when you adjust the eye height the linked wall is distorted. note the correct alignment in perspective-01 and the distortions in *-02 & *-03.