3ds Max :: How To Zoom In On A Section Of Camera View
Jan 22, 2012
I've taken a shot of a building. I'm setting up a scene that has a realistic camera lens distance and focal length taken from measurements at the architectural location. I'm creating a mesh to go over that image and it has to line up with the photo perfectly.
There are small details on the building that I need to extrude but even in full frame view on my 30" monitor I can't get close enough. If I change to a perspective or front view to work zoomed in the mesh is off when I go back to my camera view as the perspective distortion, small as it is, is different than a front or perspective view.
Is there a away to zoom in on a section of a camera view so that I can keep working on my mesh using the camera's perspective and view distortion?
3ds Max Design (3D Studio thru Max 2014), ASUS P9X79 Motherboard,
Intel i7-3960x, Hydro H80 CPU Chiller, 32GB DDR3 Ram,
Quadro 4000 Display Adapter
View 3 Replies
ADVERTISEMENT
Dec 6, 2011
I am doing some detail work in a camera viewport, is there a way to zoom into the view? Not move the camera, just make an area larger so I can better animate objects.
View 5 Replies
View Related
Jul 17, 2013
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 9 Replies
View Related
Sep 24, 2012
The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
View 6 Replies
View Related
Nov 19, 2011
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies
View Related
Oct 12, 2012
I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies
View Related
Nov 3, 2012
So, I we were taught autocad at hour school but not autocad architecture because apparently autocad architecture is too "advanced" for us. so now I need to draw window details (thermally broken aluminum frame window with insulating glass unit) but it is so much work in autocad however I was told that I can just draw a window in autocad architecture and just cut a section and just make a few adjustments to get the window detail.
View 6 Replies
View Related
Nov 8, 2012
I am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
View 5 Replies
View Related
Oct 16, 2012
My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies
View Related
Nov 28, 2012
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
View 5 Replies
View Related
Oct 1, 2012
how to create a section view for a pond other than quick view.
View 2 Replies
View Related
May 6, 2013
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies
View Related
Dec 13, 2012
how to show section view in base view with out projection the component.
View 2 Replies
View Related
Oct 29, 2013
I have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
View 7 Replies
View Related
Mar 13, 2013
Is there a way to save a section view in the assembly as a view rep? Am using 2011.
View 9 Replies
View Related
Nov 12, 2013
It's possible to do a cut view with the cup part with a different view style from the other "not Cut" half.
I achieve that, whit the cut view + normal view croped hover the cut view... but this isn´t a accurate process...
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
View 5 Replies
View Related
Apr 4, 2012
When making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.
View 3 Replies
View Related
Aug 26, 2013
I place the first view in a drawing and want to be sectioned.
Is there a way to do that, since when i mark the section line, another view is created.
Or should i put the main view outside of the paper boundaries?
View 7 Replies
View Related
Sep 4, 2012
Why Camera Views is different from all other views in Revit. It is simple not possible to add a view reference, or a tag etc. to reference to a camera view.
Of course I can put in a 'dead' symbol to show where it is in plans, but that's simply not the same...
View 2 Replies
View Related
Jul 10, 2012
leaving the isolate mode in a camera view (3dsmax-camera or vrayphysical-camera) changes the view from cameraview to perspective view. Am I missing any new setting or ist this a bug...
View 3 Replies
View Related
Oct 8, 2009
I'm using inventor 2010, In studio mode, I adjust the zoom or view that I want my camera to end with, when I click "Add camera action" bottom, that zoom change in or out,
View 1 Replies
View Related
Jul 28, 2013
How to zoom in and out via the API.
I can access the camera and eye etc. but cannot find the property related to zoom. I initially thought it was to do with the position of the eye but when I use the "Zoom" by dragging the mouse button I see that the eye position doesn't change.
I would like to connect the zoom to a slide bar and zoom in and out using that.
View 1 Replies
View Related
May 6, 2012
I did notice that zoom in or out in camera raw is slow , even in middle pc , i'm not talking about hi end pc but i did find it's amazing fast if use process 2003 or 2010. May i use like default the 2003 or 2010 ? How can i do it?
View 5 Replies
View Related
Mar 25, 2013
I am making an animation in Inventor Studio. I have created all my sequences for fading and constraint animations, and now I only need to move the camera around my assembly while zooming in and out with focus on the animations.
The way I have done it so far, is as following: Created a camera (Camera1).Set my view where I wanted the camera to start.Rightclick on Camera1 and set camera to view.Then go in a few seconds on my timeline, move my view to a new area and finally "Add camera action". I've done this a couple of times with success, but now I can't do it again.
As soon as I move my view to another area, and press "Add camera action", it does as intended, but now it zooms out, making the animated area small and hard to see. I want it to be zoomed in on a detailed area, but it's changing the view to the whole assembly.
View 7 Replies
View Related
Jan 1, 2013
I just installed 13.0.3 upgrade for 64 bit and now when I resize an image to, say 800 x 600 pixels, the resulting image is very small. To get the image to display in the window at the same size (100%) as before the upgrade I have to zoom to 200 - 300%, and get the associated pixelation. Nothing else on the computer has changed (i.e., display preferences) to my knowledge. I am using a rMBP running OS X 10.8.2. what 100% zoom looks like now, which is about 1/3 the size an image like this used to be prior to the upgrade.
View 3 Replies
View Related
Apr 14, 2011
I have just switched from Pc to Mac with AC. Not sure if its the platform change, or the later version, but I am having problems doing things I used to have no problems doing!
I have duplicated a layout, but when I click on the inside of it it wont make it active and allow me to zoom the view.
If I create a new layout, I can click inside and zoom, however, in this instance, its quick for me to duplicate and re-zoom, if only I could I have tried the MV > L > off command, but that is wanting me to select an object, and not unlock the whole layout. Same thing if I hit the lock or freeze button on the right hand tool panel.
View 3 Replies
View Related
Mar 4, 2011
I installed Xrite ColorChecker Passport software and loaded a couple of custom profiles in the develop module under camera calibration. There was a glitch in the software and it did not allow me to name those profiles. Once I uninstalled that version and loaded the newer version the naming process works fine. I would like to be able to delete the unname profile out of Lightroom but I am not seeing how that can be done.
View 13 Replies
View Related
Mar 10, 2011
Is there a way in CorelDRAW to zoom to the previous zoom position?
Is there a way to zoom to a preset zoom position?
View 14 Replies
View Related
Nov 13, 2011
I can't zoom in on the autocad these drawing coordinates are 8.00E+39,0000 -7.00E+39,000...i can't saw my drawing.
View 1 Replies
View Related
Mar 11, 2012
Just recently I got a chance to try out Autocad 2012. I modeled up an assembly. I then wblocked my individual details into separate files for detailing. I used the new drawing view tool to create my isometric views. The issue I am having is the outer most edges of my views is not being shown all the time. If I zoom in the edges appear, but when you zoom out to view the entire drawing, the edges are no longer visible. It is like the border around the view that the drawing view tool creates is not offset far enough. How to use the new drawing view tool?
View 9 Replies
View Related
Apr 13, 2012
Can't find the controls for zoom about mouse in the view ports.
Do not see a mouse tab in preferences.
View 3 Replies
View Related
