Premiere Pro :: Exporting Stuck At 0% And File Size Big
Mar 28, 2014
I'm trying to export my video game footage that I took. Which was captured in 60fps, 1920x1080, 48khz. I'm trying to export at h.264, 60fps, vbr 2 pass.
My concern is that when I increase the target bitrate the file size increases a lot. I left it at 10 atm and the estimated file size is at 1430MB. Now I've watched videos on YouTube, on Adobe Premiere export settings for gameplay footage and their file size is under 100MB with just about the same output settings as mine. I've tried exporting in Premiere but it just gets stuck at 0%, Adobe Media Encoder works but the estimated completion time is around 4 hours. When I watched those exporting videos it was almost instantly completed when he hit the export button. I could just wait 4 hours for every video I make but that's just not efficient. So I'm just curious on any solutions to my problem.
Could it be my computer specs? I mean I'm able to play games like Skyrim completely fine but it's not like I was recording a game such as that. I was recording an old Gamecube game for goodness sake.
View 1 Replies
ADVERTISEMENT
Jan 18, 2014
Using Premiere Pro CS6, I'm trying to figure out why it's doing this:
I imported a video into a new sequence and made sure to match the sequence settings with the video's. I do some basic editing (not adding more video or anything like that) but when I choose to export media and have it match the sequence settings, the video appears to have the exact same attributes as the original video (minus my changes) except the file size is 2-5x larger.
View 10 Replies
View Related
Mar 9, 2014
Problem zoom, when visionage and exporting my videos, they are zoomed while I put the original video settings. However when I put break in the previsualisage video, it returns to its normal size. How do I get it retains its original size and delete this zoom effect ?
View 8 Replies
View Related
Nov 30, 2009
I have a Flash project I'm working on that is video with corresponding bulletpoints displayed next to it. While I've gotten it to work with embed cue points in the FLV file so that at certain times in the video the Flash movie goes to certain frames to display the relevant bullet points I haven't gotten it so that it can tell what the appropriate bullet point is if someone scrubs the video past the last cue point trigger. I found a process to do it using actionscript cue points instead of navigation cue points (via this guide: [URL], but it uses an external xml file for the cue points. My problem is that I can't figure out how to get that XML file without having to redo all the cue points manually. Is there someway to make Premiere Pro (CS3) export an xml file of the markers placed in my timeline instead of embedding them into the FLV file? Alternatively if there is a way I could extract them from the FLV file, that would be acceptible too.
View 3 Replies
View Related
Feb 5, 2014
how I'm able to reduce the file size of a .mp4 when exporting from adobe premiere?
When I export in on the defualt settings it's file size is 120MB, and I'm aiming for 100MB or lower.
View 4 Replies
View Related
Feb 16, 2014
I opened up a new project to edit and imported my raw video. When I dropped a clip onto the timeline and played it, it played as if I put in it fast forward (which I did not). This happened with all of my video clips and I even imported a video clip I recently edited, that did not do that when I originally edited it, but it also plays in fast forward.
View 3 Replies
View Related
Feb 15, 2013
I am trying to export and save numerous Inventor Assembly Models, to send to various customers to import into their models. I have been saving them as .stp files, but they are very large files after exporting, and I'd like to know if there is a way to decrease the exported file size. I could zip them after I create them, but I was hoping there was an easier way or different format than .stp. I could also suppress numerous internal componants, but I would rather not have to go through that task either. In the end, they would really only require the outer shell, with any externally viewed holes still present.
View 2 Replies
View Related
Nov 21, 2012
I cant' figure this out for the life of me. I'm gonna lay out everything I do step by step.. Open photo that's 12.5 MB Open as Layer my second photo that's 7.26MB At the bottom it confirms the size of my project. Export.. As pdf. Final file size is 488 KB
HOW. How and why does it do that.
How do I export to the same large file?
View 1 Replies
View Related
Mar 6, 2014
I have troubles exporting artboards in png file :
I am making artboard of 100px by 100px in order to make a button when I export it (in 72 DPI) the result is 101px by 101px. So how can I export in the size i define the artboard ?
For information I am usind illustrator CC on an iMac.
View 8 Replies
View Related
Jan 30, 2014
I have a project file which has gotten so huge the project is impossible to work with - after I have added Warp Stabilizer to long a video-file. But after I remove the Warp Stabilizer effect the file remains the same size. Is there some setting where I can clear/empty the analysis.
View 6 Replies
View Related
Nov 12, 2013
I'm using Photoshop CS5 with a Wacom cintiq, and the brush size is stuck at 1 px, it won't change size no matter what -even if the brush size is set to 1000 px, the brush will paint a scraggly thin line...
I've changed brushes/ opacity/ flow/ pen pressure/ restarted photoshop/ restarted computer/ shut down, etc. It doesn't changeIt works just fine in the mixer brush tool, but not the regular brush tool..
View 2 Replies
View Related
Jul 30, 2012
I have a comic problem with 3ds max. I want to have a 500X500 size video from 3ds max. However 3ds max creates 720x480 size avi video. Example: if I select 500x500 output size, when play the resulting avi, its 720x480. I really couldn't solve the problem. Even I am typing 500x500 custom size into output size command. Am I missing a setting somewhere?
View 8 Replies
View Related
Aug 9, 2012
I just opened a template but this one got the artboard dimensions set to "pt"..I went into preferences settings and It was already set into "inches"..Even when I want to resize the artboard (shift+O) it's still the same..
View 3 Replies
View Related
Aug 5, 2008
Sometimes I get an error saying that my font cannot be over 18px. I've used this font before with over 18, why do I keep getting this error? It is on different fonts, not just one, and only happens every once and a while but is a pain when I am needing to use a particular font but cannot because I cannot get it to a bigger size. Any one run into this error, is there anything I can do about it? I've shut down/restarted Photoshop,
View 7 Replies
View Related
Jan 9, 2014
How do I get a premiere CC project to a web-friendly viewing format?
View 6 Replies
View Related
Mar 17, 2014
How can I export a video from Premiere Pro CC in .mov format suitable for posting on the Amazon bookselling site?
View 2 Replies
View Related
Jan 18, 2014
I am on the final stages of finishing my first ever HD project, having made the jump Premiere Pro 2.0 to Premiere CS5. Mid-way thru I found it necessary to upgrade to Creative Cloud, so that is where I am working now. The HD world is so vastly different from the old SD flow that every single step of this project has been a huge learning curve for me. I am basically an 'oldie' but for all practical purposes I am a total 'newbie' at this. That said, I am now finding myself ready to export my project to DVD in a SD form with Stereo sound.
I am working with footage shot on the Red Epic. At my current stage I am working withh ProRes 444 renders from which I have created a full nested 74 minute timeline. Frame rate is 23.976 and the source is1920x1080 with 1.0 square pixels.
So now my movie is done, and it looks and sounds like I want it to. The question now, in a nutshell, is what file type and settings should I use to export my movie so that I can retain aspect ratio? Should I output a movie first or take the project into another program like encore first and make my disc from there?
Also, I have my first screening coming up (primarily for cast and crew and industry insiders) in a couple of weeks, so I need to create a 1080 HD File with my 5.1 surround track that I project from a laptop. The screening venue has the capability to do that via a simple HDMI cable hookup, but does the laptop I use need to have any special capabilities to do the job? And what is the best file type to use for that?
I have always been more of an artist than a tech head, but I am pretty much doing the whole post on this movie alone, with the exception of the Dissolve renders and the sound design, which I had done for me (I have a great finished 5.1 design in .wav format, as well as a stereo version).
I should also mention that I currently have Encore CS5. Can I work with this on a Premiere CC project?
View 5 Replies
View Related
Jun 8, 2012
I can't believe there is not more demand for this. My web dev is asking me for over 300 video clips in both .web and .ogg - - AME does not do this.Any success with a 3rd party plug-in of some sort. I can use Fire fogg (from Firefox) but it's slow using over the web as opposed to exporting from Premiere.
View 32 Replies
View Related
Feb 15, 2014
i have recently brought a new computer (very powerful) for the things i want to do, as i am also posting this you can tell i make alot of videos as well.
Here are my computer specs:
intel core i7 quad core 3.70ghz
16gb beast ram 2400mhz
4gb amd radeon r9 290 graphics card
asus SSD writes @ 830mb/rs
At the moment i am exporting a video which is 1hour and 20 minutes long and have manged to get the export time down to 30-40minutes
I have always been trying to figuring out how to get faster exporting times for a long time now, is it dependant on the sequance settings as well?
View 24 Replies
View Related
Mar 14, 2014
How do I exporting one frame as an image?
View 1 Replies
View Related
Dec 12, 2013
i exported my video according to the tutorial here : URL....but now I dont know how to share the video, specifically email it.
View 1 Replies
View Related
Mar 10, 2014
I am new to premiere CS5. I need to send the roughcut to the client for review before further work is done. How to export the project to create a quicktime video? How can I create different sized files?
View 1 Replies
View Related
Feb 5, 2014
I have been attempting to export a video from both Premiere and Media encoder in the H.264 codec and it continually discards the final few seconds of black frames. I have tried placing black video there, but it doesn't make a difference.
View 6 Replies
View Related
Feb 6, 2014
I'm working with the denoiser filter cleaning up some audio in an interview. In the timeline the audio sounds clean but on the export certain clips revert to their non-denoised state. It seems to happen with the same couple clips and I have tried unlinking and relinking the media, outputting audio only, outputting just pieces of the timeline and, of course, restarting my machine. There are lots of other clips in the timeline using the same filter and they sound fine
View 1 Replies
View Related
Aug 5, 2013
When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. This affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
View 11 Replies
View Related
Feb 18, 2014
I'm having problems with progressive videos that look interlaced after exporting full size.The videos look fine within PP; when the same sequence is exported using You-Tube and Vimeo settings there is no interlacing.
View 6 Replies
View Related
Oct 27, 2013
Okay getting completely irritated with these issues of overheating when I even just am rendering a video to get ready for export (and also on exporting)
I have tried setting power controls to the CPU to 80% but using SpeedFan I can see the CPU usage still spiking 90%-98% and heating just keeps rising and rising til shutdown.Idle CPU
-Rendering Usage in Balanced Power Settings
-Rendering Usage in High Power Settings
I really suck at understanding these things. But changing from Balanced to High Power didnt seem to affect the rendering times. But also the time was down at like 20-40 minutes before I started messing with the power controls now its at over 2 hours.
Finished a small render with success but it got pretty hot again and Norton pops up saying High CPU usage by PPro. 100% was hit quite a bit too
View 15 Replies
View Related
Oct 14, 2013
I am using Illustrator CC and I am working on a file, after save it. I try to open it again and Illustrator stuck in thinking and never open the file.
Second time that this happened and with different files.
View 3 Replies
View Related
Dec 9, 2013
I'm exporting DSLR footage with synced audio in order to "bake" the audio in. I'm going to bring the export into Prelude to organize and then back into Premiere to edit. What are the best export settings (including target and maximum bitrate) to maintain top quality footage that I'll continue editing?
View 1 Replies
View Related
Feb 16, 2014
For the longest time if I ever tried to export or render a video longer than 5 minutes, my Premiere Pro or Media Encoder crashes. I don't know why but it is EXTREMELY irritating when attempting to make lengthened gaming videos. I have tried 15 different methods all online, to no avail. It always crashes around the 40% mark in Adobe Premiere and it isn't a corrupt project.
Technical Specifications:
OS NameMicrosoft Windows 7 Home PremiumVersion6.1.7601 Service Pack 1 Build 7601Other OS DescriptionNot AvailableOS ManufacturerMicrosoft CorporationSystem NameFRITZ-PCSystem ManufacturerMSISystem ModelMS-7821System Typex64-based PCProcessorIntel(R) Core(TM) i5-4670 CPU @ 3.40GHz, 3400 Mhz, 4 Core(s), 4 Logical Processor(s)BIOS Version/DateAmerican Megatrends Inc. V1.1, 5/3/2013SMBIOS Version2.7Windows DirectoryC:WindowsSystem DirectoryC:Windowssystem32Boot DeviceDeviceHarddiskVolume1LocaleUnited StatesHardware Abstraction LayerVersion = "6.1.7601.17514"User NameFritz-PCFritzTime ZoneEastern Standard TimeInstalled Physical Memory (RAM)8.00 GBTotal Physical Memory7.95 GBAvailable Physical Memory5.97 GBTotal Virtual Memory15.9 GBAvailable Virtual Memory12.4 GBPage File Space7.95 GBPage FileC:pagefile.sys
View 2 Replies
View Related
Jan 14, 2014
I recently started to work with the Adobe suit so i am not yet used to the workflow. We are serval people working on the post production of a short movie filmed with a red SCARLET in raw which means that the files are pretty big. The audio where captured in serval tracks who all have been merged with the video clips. The clips have thereafter been cut and placed in its right place. So now it is my job to work with the sound design. I have tryd to export the audio in both AAF and OMF and every time i open it up in Audition it sais that the media is offline. On my computer all i have is the orgininal Audio files. Is there anyway to get only the audio (all the tracks) to Audition, without having them searching for the merged files. For example creating new Audio from the cutted tracks?
View 1 Replies
View Related
