I am new to premiere CS5. I need to send the roughcut to the client for review before further work is done. How to export the project to create a quicktime video? How can I create different sized files?
View 1 RepliesI can't believe there is not more demand for this. My web dev is asking me for over 300 video clips in both .web and .ogg - - AME does not do this.Any success with a 3rd party plug-in of some sort. I can use Fire fogg (from Firefox) but it's slow using over the web as opposed to exporting from Premiere.
View 32 Replies View RelatedI'm having problems with progressive videos that look interlaced after exporting full size.The videos look fine within PP; when the same sequence is exported using You-Tube and Vimeo settings there is no interlacing.
View 6 Replies View RelatedI'm exporting DSLR footage with synced audio in order to "bake" the audio in. I'm going to bring the export into Prelude to organize and then back into Premiere to edit. What are the best export settings (including target and maximum bitrate) to maintain top quality footage that I'll continue editing?
View 1 Replies View RelatedCan I use "edit in" in Lightroom to move video clips to premier or premier elements to edit them?
View 17 Replies View RelatedHow can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
I am able to export from Lightroom to my computer (iMac), but the file that shows up is NOT EDITED.
View 2 Replies View RelatedEdited raw AVC/HD footage on Premiere Pro, but in preview and also when exported it flickers which it doesn't do on the original clip.
I've made 20 different sequences in this project without realising this issue! And I really want to avoid having to import all the clips again and re-edit.
Working on a 2011 MacBook Pro running cs6
Is there any way to automatically export only the pictures I've enhanced during the develop phase? I was resolved to Ctrl-Click on the ones at the bottom filmstrip that I could 'see' that I had edited (about 15 out of a hundred) and then export to a subdirectory. Maybe someway to filter that bottom filmstrip to only the pictures I've edited/enhanced?
View 5 Replies View Relatedwhen I upload a video to You Tube, I get a warning message that my video and audio are out of synch. Once uploaded, the video plays just fine, looks great. But I don't know why I get the warning when I upload. Video clip and audio track are the same length.
View 1 Replies View RelatedWhen exporting my edited pictures to a folder in m Pictures it goes as a blank soft color but no photo. It looks like a tiny dot and when you open it, it is a soft color..
View 10 Replies View RelatedI have created and burnt a video and find that after burning it plays fine on a computer but not on television. Opening the video in Pro X3 and checking the Properties I find that it is in NTSC profile. Obviously not a lot of use in the UK. The television tells me that the DVD is an incorrect DVD, which I would expect if it's burnt for viewing on a computer or in NTSC format.
How can I change this to PAL DVD? When saved it is saved in Corel VS, which I would expect. When I go into the Library to obtain the video there appears nowhere where I can change it to PAL.
I just finished editing MP4 videos with Corel VideoStudio x3. I exported the videos in the same format. The problem i am having with all of the videos is that when I try to view them with Adobe Flash Player All I get is the audio portion of the video and the Adobe controller is visible. I have tried to exporting the videos in a few different MP4 formats but none seem to work?
View 5 Replies View RelatedHow I can add an edited audio file to a MP4 video file? The problem is that the MP4 video already has audio files included with the import. I want to change those file and add the edited files. It seems that I can't delete or cut the audio files out of the video clip to add the edited version. By the way I am using Corel Video Studio Pro X3
View 1 Replies View RelatedAll I am trying to do is cut out small portions of a video just to get rid of the parts I don't want. However, when I use the multi-trim feature, it strips the original audio. I know it does this so you can create your own video and then overlay your own audio. However, all I want to do is just cut out a few portions of the video while retaining the original audio minus the parts I cut out (i.e. I don't want to have to overlay any audio for this project, I just want a simple way to cut a few parts out and be done).
View 8 Replies View Relatedhow to make my edited mp4 video files smaller so that They upload and download much quicker. I did some editing to some MPEG-4 video files and when I was finished I found out that the file sizes of each video blew up to huge numbers. During the editing I did add some transitions and .MPEG photo images. I didn't think that the video size would grow to that amount. I really would like to keep the MPEG-4 format for the convenience to the viewer. I just need to have it in the smallest file size possible. how I can get my "MP4 H264 - MPEG-4 AVC Resolution 640x480" videos to an acceptable file size?
View 8 Replies View RelatedHow do I get a premiere CC project to a web-friendly viewing format?
View 6 Replies View RelatedHow can I export a video from Premiere Pro CC in .mov format suitable for posting on the Amazon bookselling site?
View 2 Replies View RelatedI am on the final stages of finishing my first ever HD project, having made the jump Premiere Pro 2.0 to Premiere CS5. Mid-way thru I found it necessary to upgrade to Creative Cloud, so that is where I am working now. The HD world is so vastly different from the old SD flow that every single step of this project has been a huge learning curve for me. I am basically an 'oldie' but for all practical purposes I am a total 'newbie' at this. That said, I am now finding myself ready to export my project to DVD in a SD form with Stereo sound.
I am working with footage shot on the Red Epic. At my current stage I am working withh ProRes 444 renders from which I have created a full nested 74 minute timeline. Frame rate is 23.976 and the source is1920x1080 with 1.0 square pixels.
So now my movie is done, and it looks and sounds like I want it to. The question now, in a nutshell, is what file type and settings should I use to export my movie so that I can retain aspect ratio? Should I output a movie first or take the project into another program like encore first and make my disc from there?
Also, I have my first screening coming up (primarily for cast and crew and industry insiders) in a couple of weeks, so I need to create a 1080 HD File with my 5.1 surround track that I project from a laptop. The screening venue has the capability to do that via a simple HDMI cable hookup, but does the laptop I use need to have any special capabilities to do the job? And what is the best file type to use for that?
I have always been more of an artist than a tech head, but I am pretty much doing the whole post on this movie alone, with the exception of the Dissolve renders and the sound design, which I had done for me (I have a great finished 5.1 design in .wav format, as well as a stereo version).
I should also mention that I currently have Encore CS5. Can I work with this on a Premiere CC project?
i have recently brought a new computer (very powerful) for the things i want to do, as i am also posting this you can tell i make alot of videos as well.
Here are my computer specs:
intel core i7 quad core 3.70ghz
16gb beast ram 2400mhz
4gb amd radeon r9 290 graphics card
asus SSD writes @ 830mb/rs
At the moment i am exporting a video which is 1hour and 20 minutes long and have manged to get the export time down to 30-40minutes
I have always been trying to figuring out how to get faster exporting times for a long time now, is it dependant on the sequance settings as well?
How do I exporting one frame as an image?
View 1 Replies View Relatedi exported my video according to the tutorial here : URL....but now I dont know how to share the video, specifically email it.
View 1 Replies View RelatedI have a Flash project I'm working on that is video with corresponding bulletpoints displayed next to it. While I've gotten it to work with embed cue points in the FLV file so that at certain times in the video the Flash movie goes to certain frames to display the relevant bullet points I haven't gotten it so that it can tell what the appropriate bullet point is if someone scrubs the video past the last cue point trigger. I found a process to do it using actionscript cue points instead of navigation cue points (via this guide: [URL], but it uses an external xml file for the cue points. My problem is that I can't figure out how to get that XML file without having to redo all the cue points manually. Is there someway to make Premiere Pro (CS3) export an xml file of the markers placed in my timeline instead of embedding them into the FLV file? Alternatively if there is a way I could extract them from the FLV file, that would be acceptible too.
View 3 Replies View RelatedI have been attempting to export a video from both Premiere and Media encoder in the H.264 codec and it continually discards the final few seconds of black frames. I have tried placing black video there, but it doesn't make a difference.
View 6 Replies View RelatedI'm trying to export my video game footage that I took. Which was captured in 60fps, 1920x1080, 48khz. I'm trying to export at h.264, 60fps, vbr 2 pass.
My concern is that when I increase the target bitrate the file size increases a lot. I left it at 10 atm and the estimated file size is at 1430MB. Now I've watched videos on YouTube, on Adobe Premiere export settings for gameplay footage and their file size is under 100MB with just about the same output settings as mine. I've tried exporting in Premiere but it just gets stuck at 0%, Adobe Media Encoder works but the estimated completion time is around 4 hours. When I watched those exporting videos it was almost instantly completed when he hit the export button. I could just wait 4 hours for every video I make but that's just not efficient. So I'm just curious on any solutions to my problem.
Could it be my computer specs? I mean I'm able to play games like Skyrim completely fine but it's not like I was recording a game such as that. I was recording an old Gamecube game for goodness sake.
I'm working with the denoiser filter cleaning up some audio in an interview. In the timeline the audio sounds clean but on the export certain clips revert to their non-denoised state. It seems to happen with the same couple clips and I have tried unlinking and relinking the media, outputting audio only, outputting just pieces of the timeline and, of course, restarting my machine. There are lots of other clips in the timeline using the same filter and they sound fine
View 1 Replies View RelatedWhen exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
Is there a way to set the default Source Range to something besides Sequence In/Out?
My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap".
For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
Now here's that same in/out in "Lighter Appearance":
Not exactly optimized. Can hardly see it. This affects in/out points in the Source Window as well. Really hard to see.
Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
Okay getting completely irritated with these issues of overheating when I even just am rendering a video to get ready for export (and also on exporting)
I have tried setting power controls to the CPU to 80% but using SpeedFan I can see the CPU usage still spiking 90%-98% and heating just keeps rising and rising til shutdown.Idle CPU
-Rendering Usage in Balanced Power Settings
-Rendering Usage in High Power Settings
I really suck at understanding these things. But changing from Balanced to High Power didnt seem to affect the rendering times. But also the time was down at like 20-40 minutes before I started messing with the power controls now its at over 2 hours.
Finished a small render with success but it got pretty hot again and Norton pops up saying High CPU usage by PPro. 100% was hit quite a bit too
For the longest time if I ever tried to export or render a video longer than 5 minutes, my Premiere Pro or Media Encoder crashes. I don't know why but it is EXTREMELY irritating when attempting to make lengthened gaming videos. I have tried 15 different methods all online, to no avail. It always crashes around the 40% mark in Adobe Premiere and it isn't a corrupt project.
Technical Specifications:
OS NameMicrosoft Windows 7 Home PremiumVersion6.1.7601 Service Pack 1 Build 7601Other OS DescriptionNot AvailableOS ManufacturerMicrosoft CorporationSystem NameFRITZ-PCSystem ManufacturerMSISystem ModelMS-7821System Typex64-based PCProcessorIntel(R) Core(TM) i5-4670 CPU @ 3.40GHz, 3400 Mhz, 4 Core(s), 4 Logical Processor(s)BIOS Version/DateAmerican Megatrends Inc. V1.1, 5/3/2013SMBIOS Version2.7Windows DirectoryC:WindowsSystem DirectoryC:Windowssystem32Boot DeviceDeviceHarddiskVolume1LocaleUnited StatesHardware Abstraction LayerVersion = "6.1.7601.17514"User NameFritz-PCFritzTime ZoneEastern Standard TimeInstalled Physical Memory (RAM)8.00 GBTotal Physical Memory7.95 GBAvailable Physical Memory5.97 GBTotal Virtual Memory15.9 GBAvailable Virtual Memory12.4 GBPage File Space7.95 GBPage FileC:pagefile.sys
I recently started to work with the Adobe suit so i am not yet used to the workflow. We are serval people working on the post production of a short movie filmed with a red SCARLET in raw which means that the files are pretty big. The audio where captured in serval tracks who all have been merged with the video clips. The clips have thereafter been cut and placed in its right place. So now it is my job to work with the sound design. I have tryd to export the audio in both AAF and OMF and every time i open it up in Audition it sais that the media is offline. On my computer all i have is the orgininal Audio files. Is there anyway to get only the audio (all the tracks) to Audition, without having them searching for the merged files. For example creating new Audio from the cutted tracks?
View 1 Replies View RelatedUsing Premiere Pro CS6, I'm trying to figure out why it's doing this:
I imported a video into a new sequence and made sure to match the sequence settings with the video's. I do some basic editing (not adding more video or anything like that) but when I choose to export media and have it match the sequence settings, the video appears to have the exact same attributes as the original video (minus my changes) except the file size is 2-5x larger.