I am trying to open a video to edit in CS6 and I get this error: Could not complete your request because DynamicLink is not available
I tried to update and it told me to use the Adobe Application Manager, which in turn gave an error and told me to use the Adobe Support Advisor, which didnt work.
I tried to uninstall the program and it told me to use the Adobe Application Manager.
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012 I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
# Restart the computer and try the installation again.
I'm trying to uninstall PS CC - I am using the trial and do not wish to continue. However when I follow Adobe's guide and uninstall in Applications I get this message: “Uninstall Adobe Photoshop CC” is used by Mac OS X and can’t be opened".
I didn't have any template charged in my Revit, so I've tried to ADD Features or to Repair it or even Uninstall but i just receive the message that it is unable to do it!
Please find the attached "Error Message.jpg" file.I am getting that Error Message while trying to Uninstall "CorelDRAW Graphics Suite X6" on a Windows XP Desktop Computer. This Computer belongs to other person. I am getting the same Error Message upon trying to Re-Install CorelDRAW Graphics Suite X6.How do I successfully Uninstall and Re-Install?
it's been a couple of days since i tried out Photoshop CS4 and Dreamweaver CS4 to see how they compare to the CS3 versions, it worked fine and all till suddenly it stopped working, so i been trying to uninstall/reinstall to get it working under the free trial limit i still have left (27 days as of this writing) it still will not work.
Sometimes i would install Photoshop/Dreamweaver and say an error occurred and some components were unable to install and would be unable to load the file even after doing what the instructions say...
Same goes for when i try to uninstall both Photoshop/Dreamweaver, i would try to uninstall and would still remain in my program files...
I am completely stumped on what to do, i can't even re-install photoshop/dreamweaver cs3 as well due to this...
I am running on Vista 32bit SP1 Pack on HP Pavilion, i want to completely get rid of CS4 versions and go back to my reliable CS3 again,
I am trying to update to Camera Raw 6.7.1 in CS5. I downloaded form this link:
[URL].........
However, after download and unzip the folder says it is the update for version 7.1 which will not work for CS5. Need a link to download the update to version 6.7.1.
why cs6 13.0.1 wont update to 13.0.2 i have even done the manul update and that will not work.
i have removed and put photoshop on my macbook retina now 2 times i have all up to date updates. i have done every step ive seen in other discussions and still no luck.
I am not able to update photoshop CS6 to the latest version. I have this problem on two computers. I get an error message which refers me to a file in the ../common filesadobeinstaller directory, but the file is not readable (gz). I have repeatedly tried to install the update. I have de-installed the program and re-installed it, but am still unable to apply the update.
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
I'm at the stage where I input my date of birth and choosing a personal URL for Adobe Photoshop Elements 9. I DO NOT use symbols. I have tried simple words and names and sometimes include numbers. I've checked both boxes referring to updates and agreeing to the Terms of Use. I click on Update Account and I get this message:
"And error has occurred, and your changes were not saved."
I have registered the program on the website. My account is identified and recognized. Why can't I get passed Update Account? Why must I have a personal URL if it's the only thing stopping my progress?
I've got two large catalogs (one business, one personal) that work perfectly fine in LR4.4, but when I try to upgrade them to LR5 I get the error, "Lightroom couldn't update the format of its catalog file because the file appears to be damaged."
The catalogs sure don't seem damaged as they work perfectly in LR4.4. I've been able to update a few small single-shoot catalogs, is this a known problem with updating large catalogs (65k photos in one, 180k in the other)?
I have upgraded from Ltroom 3 to 5.2 and lots of differences straight away.
I have a question if
1) enable profile corrections 2) setup is Auto or Custom Or Default 3) the camera is correcr ( canon) 4) Model of the lens is correct EF17-40 5) Profile is shown as EOS-1D Mk 3
the arrows do not show any other camera and Mine is a Canon 50D, How do get the correct Profile to register also unable to update DNG files.
I have an ilogic assembly that I change to different widths. And I want ilogic to put the part number into the title block according to the size of the assembly.
What I have works but won't update on its own. I have to open the ilogic rule and close it, then open the i properties of the idw and close before it will update.
Suddenly I can't use Solid hatch. I tells me "Unable to update the solid fill" when I try to change a hatch pattern to Soild. And when I try to Hatch with Solid it tells me "Unable to fill the boundary with solid". I'm hatching a basic PLine Rectangle (all corners joined). Worked fine yesterday.
I'm trying to update my Smugmug Publish Plugin from version 2.0.3.1 to the current 2.0.7.0. I keep getting the message "Unable to perform Plugin Update. Failed to move the old plugin out of the way."
I have some parts published in the Content Center. I need to modify a dimension on some parts. I can edit the family table and modify it. The new dimensions are right. But if I open an assembly which use older versions of the modified parts, when I try to update the Content Center parts, Inventor says all standard parts are up to date. When I insert the modified from the CC, I obtain the old version.
I don't have local versions of the part.
If I insert the part with option "Update standard parts when insert", I have the old version too.
I have already made these modification on other parts with no problem, what is wrong with this part ?
How can I update the data connection source for all the display map layers in my map layouts? If I want to change the shapefile a layer is representing I can not get the layer to point to the new shapefile.
The layer seems to always remember the name/location of the old shapefile. If I export the layer and modify the value in Notepad then load a new layer from the saved and modified layer file it will change. However I would have to do this for every layer I want to change.
Is there another way to change the property of this layer in AutoCAD?
Example: I create a drawing and layout with a Display layer that points to the FDO data for shapefiles "C:datauildings.shp".
I then give the drawing to another worker hows data is on "E:DATABUILDINGS.SHP" the data connection to the layer cannot be updated that I can see.
When I insert a threaded part from the Content Center I get this message "unable to successfully update the member part file, problem occurred when setting thread data" The fastener will insert but the threads are very small.
I am installing LR4. I tried to update the catalog.I received the message that LR encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of Lightroom. When I click on the See Adobe Technote button, I received the message that that file is unavailable from the Adobe Website. I don't want to loose all my catalog information from my previous instralling of LR2.7.
i just noticed that there is no manual update file for ACR 7.2. most of our company computers are offline.
how should we update them without a manual update file?
[URL]..........
adobes says the final ACR 7.2 update is available through the CS6 update.well that is of no use when you have offline computers. This update will be released as manual update file too?! any infos?
When transfering images from Lightroom to Photoshop HDR for instance. message says update Camera Raw. Update attempts all come back to 'update server is not in service' --
I have recently switched from the Creative Cloud subscription to the Photoshop/Lightroom CC program because I didn't use any of the other apps (so why pay for them).
I am having issues with PS and tried to uninstall it from my iMac in the manner I know to uninstall programs and can't seem to get it done.
I need to uninstall so I can download another version to be able to use it.
i had a trial of cs6 installed on my computer decided not to go with it going with another one now it wont uninstall. It shows up in uninstall and when i click on it to uninstall it says Uninstall Failed Your Uninstall encountered errors. I have ran the cleaner tool and it did nothing didnt pick it up? how do i get this off so i can get the one i want?
