I have upgraded from Ltroom 3 to 5.2 and lots of differences straight away.
I have a question if
1) enable profile corrections
2) setup is Auto or Custom Or Default
3) the camera is correcr ( canon)
4) Model of the lens is correct EF17-40
5) Profile is shown as EOS-1D Mk 3
the arrows do not show any other camera and Mine is a Canon 50D, How do get the correct Profile to register also unable to update DNG files.
I installed my upgrade to LR5 last night but it keeps giving me an error when I try to upgrade my LR4 catalog. It goes through the initial steps, stays at "preparing new searchable data" for a long time, then eventually stops and pops up the error message: "Unable to upgrade catalog. Lightroom encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of Lightroom". I tried upgrading a smaller catalog that I don't use anymore and it worked fine. how I can get this catalog converted? Its my main catalog with all of my current years' images. For the time being LR 4 is working fine but I'd love to get 5 up and running.
View 2 Replies View RelatedI just upgraded my iMAC to OS 10.7.4 and started getting the following dialog box message when I tried to open Lightroom 4: "The Lightroom catalog cannot be used because the parent folder “/” does not allow files to be created within it. Please fix the folder permissions or choose a different catalog" I have changed the permissions to read/write for the drive, parent folder and catalog file.
View 5 Replies View RelatedI have upgraded to Lightroom 5.3. After uploading the software, when I attempt to open the program, I get the message: "The application was unable to open correctly (0xc000007b). Click OK to close the application. I have not been able to contact Adobe for support.
View 2 Replies View RelatedI've got two large catalogs (one business, one personal) that work perfectly fine in LR4.4, but when I try to upgrade them to LR5 I get the error, "Lightroom couldn't update the format of its catalog file because the file appears to be damaged."
The catalogs sure don't seem damaged as they work perfectly in LR4.4. I've been able to update a few small single-shoot catalogs, is this a known problem with updating large catalogs (65k photos in one, 180k in the other)?
i have lightroom 4 and would like to upgrade to lightroom five. will i loss any of my files when i upgrade or will the be loaded in automaticly after the upgrade.
View 3 Replies View RelatedI followed the instructions starting up Lightroom 5, but, when I looked at my files that it upgraded, many file were missing. So I Imported the missing files with LR5. But then I noticed that many of the files I had imported (~3,000), had all the keywords missing! How can I fix this without reindexing the whole batch of files?
View 1 Replies View RelatedI'm trying to update my Smugmug Publish Plugin from version 2.0.3.1 to the current 2.0.7.0. I keep getting the message "Unable to perform Plugin Update. Failed to move the old plugin out of the way."
View 5 Replies View RelatedI take a lot of images for time laspe sequences andI have just upgraded to LR5 and the issue I am seeing is after inporting or developing the images the only thumbnails that update are those I curently amm looking at in the library. I can scroll down after leaving the machine for hours and they only update when currently scrolled. This is really annoying and just taking ages to do anything. I have downloaded LR5.2 RC but there is no change that I can see.
View 12 Replies View RelatedAfter updating to LR 3.6 all of my files are now black & white 'highkey' and ugly as hell. Any new files I add are initially correct in the 'color' I shot them but once I select a single file they are all converted to the same crappy black/white. I uninstalled LR and reinstalled but the values are retained time and time again.
View 7 Replies View RelatedI'm running lightroom 4.3 on a PC. The web template needed a few changes making, mainly the layout and replacing links for images etc., I could not find a way to update via lightroom so I changed the detail.html and grid.html files directly in C:Program FilesAdobeAdobe Photoshop Lightroom
4.3Sharedwebenginesdefault_html.lrwebengine. Now I need to make the same changes in lightroom 4.3 on a MAC, but how to locate the same files and update?
I'm having problems updating.I downloaded the update, but when going to install, is still on the screen and the update does not continue the upgrade process.
View 3 Replies View RelatedSo I just downloaded and ran the updates for lightroom 3 (now 3.6) and now when I open folders to view my picture files, the canon raw files are no longer associated with lightroom. Let me further explain.
After shooting, I would plug my card into a card reader and see which pictures I wanted to view in lightroom. I shoot in jpeg and raw so I could view the jpeg thumbnails to see which raw files I wanted to open in lightroom. The raw files would be "labeled" with the LR icon and I would then doulbe click the raw file I wanted and by doing so it would initiate the opeing of LR. However, now the raw files do not have the LR icon assocaited with the raw files and I can longer clcik the raw files to automatically open lightroom.
Did something change with the update?
I am installing LR4. I tried to update the catalog.I received the message that LR encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of Lightroom. When I click on the See Adobe Technote button, I received the message that that file is unavailable from the Adobe Website. I don't want to loose all my catalog information from my previous instralling of LR2.7.
View 1 Replies View RelatedI have the CS2 upgrade disc and the original Photoshop 7,with serial number, but it is damaged.
My CS2 is shown as registered but I am not able to see if that is of any value in this situation.
I recently upgraded from a mac mini to a macbook pro retina using migration assistant and time machine backup. All went well, and since all my photos were on an external drive, no problems there. However, when I try to import new photos, I see the images, but then get a list of the .CR2 files and an error message of "unable to read files." This is a Sandisk Extreme 16 GB SD card, and it still successfully works on the old mac. Following a similar issue in the forum, I checked permissions, and those appear to all be correct. I'm running LR 4.4.
View 1 Replies View RelatedI have lightroom 3.6. I just purchaesed a SDony alpha A99 camera and I am unable to view raw files in lightroom. What can be done
View 1 Replies View RelatedLightroom is current unable to export files (this has happened mid session) It tells me that the file could not be found dispite having just been worked on in lightroom and external editors (Nik software)Testing this it is now happening to all files. There are no tell tail ? marks against these files and all catalogues appear to OK.
Mac OSX 10.6 Lightroom 3.6
Mac Pro
Model Name:Mac Pro Model Identifier:MacPro3,1 Processor Name:Quad-Core Intel Xeon Processor Speed:2.8 GHz Number Of Processors:2 Total Number Of Cores:8 L2 Cache (per processor):12 MB Memory:4 GB Bus Speed:1.6 GHz Boot ROM Version:MP31.006C.B05 SMC Version (system):1.25f4 Serial Number (system):3T91400F1LY Hardware UUID:A31A73F4-7213-5FD9-BD0F-510B9C638369
Since updating to LR 4.4, I have been unable to download RAW file formats. In addition, normal .jpg files stopped working today! I can successfully still download into LR 3.6 which I kept on my system. I'm shooting with a Canon 1D Mark X and using LR on an iMac.
View 1 Replies View RelatedI am having trouble importing .CR2 files into lightroom 3.
View 5 Replies View RelatedI am unable to import NEF files into the new Lightroom 5.3, I recieve the following error message: "The files are not recognized by the raw format support in Lightroom. (251)" and then each .NEF file is listed separately. I am using the latest and most updated Lightroom software and a Nikon 3300. I get this message if I try to import directly from the SD card or if I try to import from the desktop (after copying the SD card contents onto my desktop). I also am unable to import directly from the camera. I'm using a promaster performance 32GG SD card that I formated in the Nikon 3300 before I started shooting. I took three pictures that were just JPGs on the card and these improt okay using any mechanism. All the other photos were taking RAW+JPG.
View 8 Replies View RelatedMy lightroom 4 will not open. It says being used by another application. how do i access files to unlock, If that is the problem?
View 1 Replies View RelatedI am using a MacBook Pro and Lightroom 4.4.
When importing I use the "Copy as DNG" feature and that works just fine for the RAW impages.
I then switch to the "Copy" feature to copy some JPG imsages taken with another camera and they are not copied. The information in the window is "Cound not copy a file to the requested location" and lists all files I tried to import. If I copy the files manually into the folders/locations that Lightroom should have done, the "Add" fearire works just fine.
I am just puzzled as to why Lightroom cannot copy the files to the folders that are there and add the image to the catalog on its own. Converting RAW to DNG works fine so what needs to be done to allow Copy to do the same thing.
I am unable to export any files from LR5. This just barely started happening. I have not had this issue, and I have been using LR5 for a few weeks on two different computers with no problems. I have checked all my settings several times, and tried restarting the program. It still won't export! It goes through all the files, and then a little pop-up window comes up saying it could not export the files.
View 1 Replies View RelatedI am unable to import NEF files from a d7000 into LR 4.3, but can import them into LR 3.6 without issue. What do I need to change in LR 4? It's running on a Mac and latest updates are installed.
View 4 Replies View RelatedMy hard drive crashed and I lost all my pictures. I used a recovery program and it shows them as LRPREV files but I cant open them. Is there any way to get them open and convert them to jpeg.
View 3 Replies View RelatedIf I select 5 files to rename it might rename 4 of them but not the 5th. If I try that one file by itself I get an error message saying it cannot do it. If I exit LR completely and try the file in Explorer I sometimes with still get the error message that dynamiclinkmediaserver.exe is using the file.
This is a real pain as I have over 400 video clips to tag and name and I have now spent two days on this issue.
I am using a Windows 7 Enterprise 64-bit,x laptop with 16 GB RAM.
Very recently I have lost the ability to move files from one folder to another in Lightroom 4.4. I was highlighting the files I wanted to move and then I would drag them to the folder I wanted to move the files to. Now if I highlight numerous files when I try to drag the files Lightroom will just highlight the file my cursor is hovering over. It then won't let me drag the file to the folder I desire.
View 1 Replies View RelatedI just bought Lightroom 5. I have been unable to export files as layers into Photoshop CS4, no matter what.
View 7 Replies View RelatedI know that Lightroom is unable to generate previews for PSD files if they haven't been saved with the Maximize Compatibility option. But, it seems that once you begin a preview for a folder Lightroom gets stuck in that mode even if you then go ahead and resave the file with the Maximize Compatibility option set to Always.
In a test just now I opened one of the problem files in Photoshop CS6 and saved it. Then I went back to Lightroom and tried to reimport the file but it still said Preview Unavailable. I tried toggling on/off a couple of layers and resaving but it. So, next I actually tried making a change to the file and resaving. That still didn't work. I've tried exiting from the Import dialog in LR and restarting the import and even restarting Lightroom but nothing makes a difference.
If I save a new copy of the file in Photoshop (without changing any settings in my Photoshop preferences) Lightroom i
lightroom will not export raw fiiles to a plugin... I have to make them tiff .
View 6 Replies View Related
