Lightroom :: How To Update Web Template HTML Files On MAC
Feb 15, 2013
I'm running lightroom 4.3 on a PC. The web template needed a few changes making, mainly the layout and replacing links for images etc., I could not find a way to update via lightroom so I changed the detail.html and grid.html files directly in C:Program FilesAdobeAdobe Photoshop Lightroom
4.3Sharedwebenginesdefault_html.lrwebengine. Now I need to make the same changes in lightroom 4.3 on a MAC, but how to locate the same files and update?
I set up a template to rename my files, the template was set up to show the date, a job ident and the city and state where the photo was taken. Everything works except I can not get the job ident to show in the name. I made sure in the metadata that the indent was there in the work flow section. I have gone back redone the template.
I take a lot of images for time laspe sequences andI have just upgraded to LR5 and the issue I am seeing is after inporting or developing the images the only thumbnails that update are those I curently amm looking at in the library. I can scroll down after leaving the machine for hours and they only update when currently scrolled. This is really annoying and just taking ages to do anything. I have downloaded LR5.2 RC but there is no change that I can see.
Using Win7 64bit + PS CS6 64 bit ext on a 16GB PC. In which folder do I find the web gallery templates for Bridge CS6? Is there info available on how the programming/ configuration works with the info passed by Bridge - filename, contact info, copyrights, description/title, email, etc.
After updating to LR 3.6 all of my files are now black & white 'highkey' and ugly as hell. Any new files I add are initially correct in the 'color' I shot them but once I select a single file they are all converted to the same crappy black/white. I uninstalled LR and reinstalled but the values are retained time and time again.
I have upgraded from Ltroom 3 to 5.2 and lots of differences straight away.
I have a question if
1) enable profile corrections 2) setup is Auto or Custom Or Default 3) the camera is correcr ( canon) 4) Model of the lens is correct EF17-40 5) Profile is shown as EOS-1D Mk 3
the arrows do not show any other camera and Mine is a Canon 50D, How do get the correct Profile to register also unable to update DNG files.
Made some minor changes / updates to our .idw template and would like to update previous .idw's to the new template. Can this be done automatically? Is this done in styles?
I have opened previous .idw's and checked for updates in styles and none are shown. The changes/updates are to the title block and revision table. New drawings open with the new template changes, but we would like those changes to any previous drawings as well.
So I just downloaded and ran the updates for lightroom 3 (now 3.6) and now when I open folders to view my picture files, the canon raw files are no longer associated with lightroom. Let me further explain.
After shooting, I would plug my card into a card reader and see which pictures I wanted to view in lightroom. I shoot in jpeg and raw so I could view the jpeg thumbnails to see which raw files I wanted to open in lightroom. The raw files would be "labeled" with the LR icon and I would then doulbe click the raw file I wanted and by doing so it would initiate the opeing of LR. However, now the raw files do not have the LR icon assocaited with the raw files and I can longer clcik the raw files to automatically open lightroom.
I made iLogic for assembly and drawing, now i want to update drawing template parameters thru ilogic, as i already linked Fx(parameters) & iProperties to Template, but for updating template i need to close file and open again that file,
currently m using this method.
What is the solution for updating drawing template (like Model Description, Drawing no.).
I'm trying to update a template which has custom drawing properties. In AutoCad LT 2012 (and obviously full autocad) there is an UPDATEFIELD command which updates the drawing properties.
This command is not known in my version of AutoCad LT 2008. Is there another command I can use?
I am trying to create an iLogic (or VB) rule to update an active drawing title blocks from our Template File.I don't want to use any of the external software (Transfer Wizard etc), we just need a simple rule that will update the title blocks when we need to.
I've got a project that we made some changes to several of our Civil 3D styles. I'm trying to use the Manage/Import Civil 3D styles utility to update my template. It's not working. When the dialog comes up, it shows me what styles are new with a green plus sign next to it. It does not show me the items that are in conflict (changed). Once I process it, the new style does get added to my template but the modified styles did not come over.
I'm looking for a good tutorial for converting PSD files into HTML emails. I know the basic steps such as slicing up the document, how to optimize the images, save as an HTML file and images but after that it gets fuzzy. I'm struggling with how to have text blocks in photoshop show up as text rather than be an image in the HTML.
I've searched on Lynda.com, YouTube, and quite a few other sources but can't seem to find anything that goes over it in depth. I'm a novice when it comes to HTML.
I've sliced an image for publishing to the web and saved it as an HTML file using the Save for Web command (PSC3). It is my understanding that PS creates the images and pages according to the options set in the Save for Web dialog, however, when viewed, the page shows place holders for the slices, but only red X's for the images. The resulting HTML code references a number of GIF files located in an "images" folder, but I cannot find the location of that folder. Search does not show a folder, nor the referenced file names.
Am I mis-understanding the HTML option in the Save for Web process? If not, where did PS put the images it supposedly created from the slices?
Our client uses CS 5.5, and Photoshop will continuously take control of pdf and html files. This is without any interraction from the user, and after setting it back to the desired settings (pdf - Reader, html - Chrome), after some time (and doesn't seem to be related to anything the user does, restarting machine etc), Photoshop will snatch control of either or both of these extensions.
Resetting Photoshop preferences does work for a time but it is not long before the issues arise again.
I am working with the Web module in Lightroom 4 (now 4.4) to create an online gallery with photos. I like the layout of the HMTL default template and would like to use. The only problem I found is that I can't seem to find a way to change the size of the thumbnail images and the enlarged photo that appears once the viewer clicks on the thumbnail.
I would like to change the default filename for the HTML pages produced by Lightroom 3 in the web gallery. Specifically, I would like to remove the string "_large" from the HTML filename, so it corresponds exactly to the image filename.
Specifically, the URL by default is like this: [URL] ....
and I would like it to be like this: [URL] ....
I assume there is some way to make this change using the template editors, but I can't figure it out.
I recently started a tumblr Blog account. Still having some problems configuring it. I created a new page in tumblr and would like to embedd a picture gallery out of Lightroom. There are some nice html presets in Lightroom, but I cant get them into tumblr. I now installed a tumblr plugin (Jeffrey Friedl), but it only let me upload a picture onto my main tumblr page. What I want is to export a HTML gallery preset not on the main page of tumbler but on the "sub" page I have created.
I recently bought the 'Work' template from Outfront, complete with the Photoshop source files. I then acquired a copy of Photoshop and immediately wondered how I can modify the colours in the source files.
I have created a drawing template for survey and I need to distribute it to the field crews and eventually put it on the server. The template contains description keys, point styles, point label styles, custom point file formats, figure styles, figure prefix database, line code sets, etc.
How do I transfer all the external files along with the drawing template? Is it a straight forward copy? Etransmit doesn't seem to do it unless additional files are manually included, but I can't figure out what files to include or where they live.
the location of the template folder or files. I'm not sure if it's (C:\Documents and Settings\Owner\.gimp-2.8\templates) which nothing is there. or if it's (C:\Program Files\GIMP 2\share\gimp\2.0) in which case I can't find anything there either...
We have a problem whereby our Templates revert back to a Default state. This is totally random.
One operator can create a drawing with the correct template loading up, and seconds later another operator will report that an old 'Inventor' default template has loaded up. On investigation it appears all templates marked as "standard" revert back to older versions.
I have made the Templates read only, but the problem still persists.
Autodesk Inventor 2013-64Bit Edition Intel Xeon W3520 @ 2.67GHz Win 7 Pro 6.7 System Rating NVIDIA Quadro FX 1800
I have created Template drawing files of D Size, C Size, B Size with defined title blocks and dwg sheet information on it. These template files i want to used in 2011 Solid Works . I don't want to again create the Title Blocks , Border layout and Sheet information for Solid Works. How can i import or make use of ready templates created in Inventor to Solid Works. ?
We just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
I have a problem where I am unsure if my upgraded template is incompatible with Revit 2013 or is there something else at play.
If I create a precast stair in default template I get "end with riser" turned on automaticaly. If I copy that stair to my template and create new stair, "end with riser" is turned off and I manually have to adjust stair afterwards.
Problem is "end with riser" is now an instance parameter of stairs and I can't find where to change the default value.
Why is the stair type that works in default template stuffed when copied to my template?
A month ago, a Windows update broke the version of PowerPoint I was using (on deadline, of course). The next day, while we were trying to straighten out that mess, I hit a website that downloaded a virus, which caused Win XP to blue screen within minutes. That got cleaned up immediately, and our net op set my computer to run in safe mode. After about 2 weeks in safe mode, I returned to normal access.
Since I started running safe mode, I've been unable to write to the workspace files in Ventura. I thought returning to normal access would straighten that out, but it hasn't. Neither has a reinstall. The net op has been through the registry twice, including cleaning out every key he could find before the reinstall.
Every time I close V10, I have to hit OK on half a dozen prompts. There's one for each of the four *.cfg files in the workspace folder. After the fourth one (shortcut keys), the Ventura window closes and the shortcut keys message is presented twice more.
Naturally, within VP, if I access Options, I get the four cfg prompts, and I get them again when I click OK in the Options palette. Only the cfg files are affected. The workspace *.ini files update without issue.
