Corel Ventura :: Can't Update V10 Workspace CFG Files
May 19, 2011
A month ago, a Windows update broke the version of PowerPoint I was using (on deadline, of course). The next day, while we were trying to straighten out that mess, I hit a website that downloaded a virus, which caused Win XP to blue screen within minutes. That got cleaned up immediately, and our net op set my computer to run in safe mode. After about 2 weeks in safe mode, I returned to normal access.
Since I started running safe mode, I've been unable to write to the workspace files in Ventura. I thought returning to normal access would straighten that out, but it hasn't. Neither has a reinstall. The net op has been through the registry twice, including cleaning out every key he could find before the reinstall.
Every time I close V10, I have to hit OK on half a dozen prompts. There's one for each of the four *.cfg files in the workspace folder. After the fourth one (shortcut keys), the Ventura window closes and the shortcut keys message is presented twice more.
Naturally, within VP, if I access Options, I get the four cfg prompts, and I get them again when I click OK in the Options palette. Only the cfg files are affected. The workspace *.ini files update without issue.
View 7 Replies
ADVERTISEMENT
Jun 25, 2011
My father recently switched to Ventura 10 (from 8) on a Window 7 OS, and the program is running smoothly. However, he is not able to install any other fonts (other than default ones) on them.
View 11 Replies
View Related
Jun 14, 2012
How to import the AI EPS image (files done & saved on Adobe Illustrator) to Ventura 8 using a script? Basically, unlike EPS / TIFF / or JPEG images, the AI EPS images could be loaded in Ventura using script, but the script has a different behavior. It flawlessly loads & imports the AI EPS (you could see the AI EPS files in Ventura publication chapter file navigator), but the image does not load in the publication template.
In order for these AI EPS images to get loaded & appear in the template, they need to be imported as Encapsulated PostScript (EPS) using the Filter Type option (attached image for reference).
View 14 Replies
View Related
Nov 7, 2012
Any way of importing a LATEX formatted text into Ventura 10? Older versions had a filter, but 10 seems not to.
Or is it going to be the hard work of copying and pasting?
View 5 Replies
View Related
Jun 2, 2011
I have used this option in Ventura but want to avoid using a script I use to create a php page. Is there any way in VP of creating a header and footer which tops and tails the chapter?
View 10 Replies
View Related
Sep 15, 2011
I'm trying to import foreign characters into Ventura 10 that are not available in the Multinational A or B sets under Insert | Symbols. If I simply copy and paste them from Word, nothing shows up in Ventura. Is there any way to get these "extra" foreign characters to appear?
View 1 Replies
View Related
Mar 16, 2011
I just tried to restore V10 defaults using F8 but the problem persists:Ventura 10 interface is corrupt and icons in the toolbar are hidden; I can see the desktop through the V10 toolbars. Only when I mouse over them they appear. But not all icons will appear.
If I try to run the color management dialog box I get printer driver errors.Is there a way to restore V10?
In the meantime I'll try to remove/reinstall V10.
View 2 Replies
View Related
May 2, 2011
I was almost sure it was an easy task but I cannot find a way to format numbers in a table cell. All I want to do is to use the DECIMAL alignement in table cells containing prices.
But it works only when the number are specified in the format ####,00. If you need a number like #.###,00 you have to insert a dot in the numbe and Boooom Ventura (correctly) treats it as text .
So, my question is: is there a way to type 1000,00 and get 1.000,00 correctly decimally aligned? Here is what I'm trying to get (fixed width font):
10,00
100,00
1.000,00
View 3 Replies
View Related
Jul 25, 2012
Just want to ask if there's a script command or syntax in Ventura 8 to highlight and select multiple lines?There is a marker/paragraph tag to mark the beginning of the first line to be highlighted and selected, and also another marker/paragraph tag to mark the end.
Sample here...
line 1line 2line 3begin_select lineline4line5line6line7end_select lineline 8line 9line 10
Well, above is just simplified document sample. The main goal is to have a script to select multiples lines that will start from the marker "begin_select line" and selection/highlight will terminate at marker "end_select line". Thus, giving the output of highlighting and selecting multiple lines which are line4 up to line7.
View 5 Replies
View Related
May 9, 2011
I am using Ventura 10 and I need to have a tag as a heading which has a rule around the text but the rule must have rounded corners... How to do it.
View 8 Replies
View Related
Mar 2, 2011
I run into a nasty problem using Ventura 10 on Windows XP.
When I select a text part to give it another colour (e.g. blue) and also it alise and/or bold the text, then after saving these settings are repeated several to many times in front of the indicated text part.
View 10 Replies
View Related
Dec 14, 2011
I am using Corel VENTURA7 running under Windows Vista in 64 bit processor speed. I have a four page document covered with photos, about 20 per page. Seemingly at random, my photos disappear from view and will not print. The individual frames still have the photo links attached - they are not embedded - and when I close Ventura and come back in I get a message telling me that I have broken links indicated by files in Navigator being crossed out. However, there are no files crossed out in Navigator. If I delete the offending files from Navigator (and hence the frames) and reload them, they reload with a suffix 1 appended to their name in Navigator, but still won't display on the page.
View 1 Replies
View Related
Nov 13, 2011
i'm using DBP to fill a 48 page catalog in ventura 10 with 500 product descriptions (up to 600 characters) and small .jpg photos in tables (six columns). the data is .dbf format (dbaseIV from access2000) including a memo-field and .jpg links. depending on the sort order and/or filtering (selection of ) the items it either:
1. works like a dream or
2. most commonly, the tables (including the headers) have additional empty rows around each item
with exactly the same data just sorted differently the results can be different (with or without empty rows). the result is 100% repeatable using the same recipe/sorting.i can't see any difference in the .txt files apart from the sort order of the table contents.the .jpgs are all 600 x 600px and the frame preset to 2.1cm x 2.1 cm..default page fonts all set to 7pt to avoid row height > page size
View 3 Replies
View Related
Nov 29, 2011
I would like to save the workspace to a CD as a backup in case the one in use becomes degraded. Can this be done. If so, what files should I save.
View 4 Replies
View Related
Feb 3, 2013
I am running Corel Draw X6 64 Bit on a new Windows 7 Pro 64 bit Laptop. All current updates applied. V 16.2.0.998
If I check off "Select workspace at startup" every time I start Photo-Paint the workspace selection box is hidden behind the splash screen!
I've tried resetting my profiles.How do I get the selection box on top?
View 2 Replies
View Related
Nov 9, 2007
When I try to open photo paint x3, a box pops up that says "Valid workspace file not found at the path specified." I click OK, then the box pops up again. Click OK once more then the program closes.
View 4 Replies
View Related
Sep 9, 2013
So when I booted up this morning and logged into the CC desktop application it told me that there was a Photoshop update available. I installed the update, opened Photoshop, and my workspace no longer exists. All of my custom settings (scratchpad color, menus, docks... EVERYTHING) has been reset to the "Essentials" workspace. And when I tried to "sync settings" to hopefully pull back my custom workspace from the "cloud" it showed that I had never synced before and seemed to have no information to pull from the cloud. So that did absolutely nothing. I had also saved my custom workspace, but it isn't an option to select in the drop-down menu.
Now I have to spend time trying to remember all of my custom tweaks before I can even get started on my work. At this rate, I'm going to have to screenshot my setup just so I have a record of my workspace in preparation for the next update that wipes out everything. I thought the whole point of "sync settings" was that a backup was kept of everything so this wouldn't happen.My experience thus far with CC has been that every update breaks something in my workflow.
View 4 Replies
View Related
Nov 1, 2012
There must be a faster way to updated the current, custom workspace, without having to choose "Save Workspace" and retyping the same name! I constantly tweek my workspace and do not want to save multiple versions, I just want to update the current space.
I'd like to simply hold "option" as I select the current workspace name and have AI update that workspace with my current setup.
View 6 Replies
View Related
Jun 9, 2012
In PS CS3 you could open as many graphical files as you wanted, move them around on the scrren, edit them, then create a new file and copy those into it creating a composite image.
Now, with CS6, I haven't figured out how to do that yet. If I load an image, it takes up the entire workspace, with rulers going negative to hugely positive with no reason to do so. If I load another image, I can't see them both unless I tile. if there is a way to put ALL files, say 10 of them all on ONE workspace at once? I'm almost ready to go BACK to CS3!
View 5 Replies
View Related
Apr 16, 2013
You could do this in CS5, but it doesn't seem possible in CS6. It's a bit clunky when dragging from one file to another in the tab mode. I liked having the workspace open side by side.
View 1 Replies
View Related
Apr 11, 2012
I just downloaded 2013 Autocad for MAC and I can't manage to see my drawing toolbars and also don't know where to find workspace settings to change my workspace to autocad classic.
View 9 Replies
View Related
May 1, 2011
I am trying to go from the 3D Modeling workspace to the 2D workspace without the XYZ coordinate gizmo on the drawing screen (just want to see the XY ucs) to work in 2D format.
View 1 Replies
View Related
Aug 29, 2012
I need to transfer them from CS5 to CS6. I can't work without them. I looked everywhere. Where are they stored (on a Mac)? I did try that useless migration thing.
View 3 Replies
View Related
Apr 4, 2007
Im having some color discrepancies in ps cs2. The colors that i see on my workspace(psd) are different from the colors that appear when i save the image. Check the screen grab for an example. This effect is way more pronounced on my screen.
View 2 Replies
View Related
Jan 4, 2012
is there a way to have the profile be on 2d drafting already as yoju open a new file or should you always open a new file and then change the profile from architecture to 2d drafting?
View 2 Replies
View Related
Jan 20, 2013
In previous PS versions I could see my open files as thumbnails at the bottom of my workspace instead of tabs at the top. I would love to keep using that workflow- can this be selected somehow?
View 7 Replies
View Related
Sep 15, 2013
how do I get raw NEF files (from Nikon) to open in the edit workspace of elements 8? I have windows 7 , and when I try to open NEF raw files from the viewer, it says cannot recognize the file type.
View 1 Replies
View Related
Jan 8, 2013
Some of the earlier versions (eg WP12) included clipart in .jp2 format. Connect V6 searches these files - but can't display them.
View 2 Replies
View Related
Dec 31, 2010
Recently had problematic re-install of both X3 and X5. Finally succeeded in sequential numeric order (i.e. first X3 and then X5). However now, CONNECT X5 no longer displays CDR vector file thumbnails. Currently CDRs are associated with X3.
View 14 Replies
View Related
Jul 12, 2011
Just installed the trial version of Corel Paintshop Photo Pro X3. Now I try to open old files made around 1999-2001 with Corel Photo Paint (from Office 7 Professional). None of the files are recognized. Funny thing is, WordPerfect X3 does recognize those files, and is able to import them in a document. But what do I have to do to be able to work with those files again in Corel Paintshop?? Or in any other photo-editing program for that matter?
View 5 Replies
View Related
Jun 26, 2012
So A client hires a designer to create a vehicle wrap. He does it in Photoshop. If you have not done vehicle wraps before you DO NOT DESIGN IN PHOTOSHOP!!! Anyway, he sends me a link to download a psb file. Another bad sign. Means the file is huge! 1 hr to download. I open it in photoshop (at least he left it unflattened) and reduce it down enough to make a psd with layers intact. I then import it into Corel and begin placement into the vector vehicle template. Once I get all the images fiting nicely I hit save. Come back to it the next day and it won't open. Message says a bitmap is not right "Abort, Retry or Ignore" I try the backup file, same error. I try to move a copy to my hard drive instead of working over the network. No go! Try rebooting, no go! Rebuilt the file agian and saved that version to my desktop. Saved successfully, made a couple changes and then CorelDraw crashes and shuts down. Try to reopen the file and same errors occur.
View 4 Replies
View Related
