You could do this in CS5, but it doesn't seem possible in CS6. It's a bit clunky when dragging from one file to another in the tab mode. I liked having the workspace open side by side.
View 1 RepliesIn previous PS versions I could see my open files as thumbnails at the bottom of my workspace instead of tabs at the top. I would love to keep using that workflow- can this be selected somehow?
View 7 Replies View Relatedhow do I get raw NEF files (from Nikon) to open in the edit workspace of elements 8? I have windows 7 , and when I try to open NEF raw files from the viewer, it says cannot recognize the file type.
View 1 Replies View Relatedis there a way to have the profile be on 2d drafting already as yoju open a new file or should you always open a new file and then change the profile from architecture to 2d drafting?
View 2 Replies View RelatedI have 100 files by the name of happy.jpg stored in 100 different folders, and I want to open all of them together at one go instead of individually going into each folder and opening them one by one,
View 2 Replies View RelatedI have Photoshop CS3
try to open another file and it'd automatically stop working. I.E. I would get the "Photoshop has stopped working" message. This happens with any file and any file format. I can never have more than one file open.
This is a HUGE problem for me--I'm a graphic designer and it's almost impossible to work with Photoshop this way for the rest of my career. I lost my CS3 installation discs when I moved and I don't want to have to buy a new license...
I used to highlight multiple raw files in Bridge and just press Enter (being the equivalent to File -> Open) and the images would all open together in one ACR interface with the filmstrip down the side. Now, however, one file opens and if I hit cancel or done, the second image THEN opens, and so on and so forth. If instead of pressing Enter I choose File -> Open in Camera Raw or I right-click and Open in Camera Raw, it works fine and does what I want (or if I click the aperture symbol on the toolbar at the top).
The worst part is that it worked fine until I uninstalled CS5.1. I had CS5.1 no problem, then installed CS6/CC alongside it. I got eveything working how I wanted in CS6/CC and then uninstalled CS5.1. I may be wrong on the exact timing of the problem and therefore it may be a Red Herring, but it seems fairly close together when this started.
Notes: There is no expansion bar on the left of ACR that is just hiding the filmstrip. Which is consistant with the fact that the second image does in fact open after I close the first. So they are clearly being treated as seperate open actions. Also, in Bridge, Edit -> Preferences -> General: 'Double-click Edits Camera Raw Settings in Bridge', ticked or unticked makes no difference. Also in Photoshop, Edit - Preferences -> File Handling: 'Prefer Adobe Camera Raw for Supported Raw Files', ticked or unticked makes no difference.
I have also tried changing the above mentioned options, closing PS and Bridge so the preferences file is updates, changing them back to how I want and closing so the preferences file is updated and I get the same results.
how do you select multiple files (in this case PNGs) and open them as individual layers on one file instead of opening them as separate files?
View 5 Replies View RelatedMy engineering department produces .ps files that need to be merged into a single Photoshop file as individual layers. Here's what I'd like to do:
1) Drag a set of .ps files onto a droplet
2) For every .ps file, open with same parameters (e.g. 300 DPI, RGB)
3) Adjust Hue/Sat and set Lightness to +50
4) Colorize each layer and adjust saturation to 100%
5) Make each opened file an individual layer in NewFile.psd
6) Close/delete any intermediate files (but not the original .ps's) and leave NewFile.psd open for further editing
My current droplet will do 1-4, but now I'm stuck! How do I take all the open files and make them into layers in a new .psd?
If I can't do this directly, I can save the results of each .ps conversion into a separate .psd, but then I'll need a droplet to convert
each .psd into a layer in NewFile.psd. I can't figure how to do that, because the Override Open/Save setting seems to mess things up.
I choose OpenAs in the editor, and set to Raw, but I can only open one file at a time.
View 2 Replies View RelatedI can open one JPEG at a time, or multiple Raw images in ACR.
Have checked other sources including Barbara Brundage "The Missing Manual" but whilst it does not specifically say you cannot, likewise there is no indication that you can.
I have a builder client who sends house plans in dwg. Recently, I have been receiving a folder full of dwg files for every room, options, etc.. When I try to open, say, the first floor plan, only dimensions show up. If I open up bedroom 3, only that bedroom shows, with no dims or context. How do I get one complete plan all together?
View 2 Replies View RelatedI just re-installed windows and all the fine (PITA!) trimmings. Now, when I open a file (any type) for Inventor thru windows explorer it opens a NEW instance of Inventor everytime! This is a HUGE system hog, waste of time ect ect.
How can I correct this to just open in the instance that is already there?
Inventor 2014 PDS
im currently running a
Precision T3500
Xeon W3520
Quadro fx580
6gb ram
Win7 Ultimate
I'm only running Autocad 2013 LT on my computer without servers.
I need to open multiple files at a time with some of them being 40mb large. Problem is it takes quite sometime to open the large files.
What can i do to improve the performance of opening and working with larger files? Would adding more ram dramticaly improve it? If not, i would go about buying a new i7 cpu.
I recently had a power failure while working in AICS5 on Mac OS 10.7.5. When I restarted, AI reopened and tried to open every file I've worked on, in the last month or so.
View 6 Replies View RelatedI have been using the sheet set manager with very few problems for years until - you guessed it - I was upgraded to Windows 7 OS v6.1 and Civil3D 2012 IDS.
Up until then, I was able to open layouts in different drawing files through the sheet set manager while in an open file. Now, I get an error message (see attached) and have to close the file I'm in to open the other.
I can open files through the regular file open command and have more than one open at the same time, but it takes away the convenience of using the sheet set manager to avoid having to browse to the desired sheet layouts when copyclipping sheet layout drawing elements from one file to another.
I have studied every sheet set system variable to see if that was the problem, but could not find an answer. I have the same problem in Civil3D 2010. It happens to new and existing sheet sets in both versions and sheet sets made before the Windows update.
Is there any way to set a preference so that when I open an image from my Finder (Mac) it opens in the center of my Application Frame workspace rather than always docked to the top left corner?
CS5.1 Extended, updated, current Mac OSX updated
When I drag a 3600x3600 px image onto a 3600x3600 px canvas, my image gets placed on the canvas with it's center at 1803,1803 px. So it's off just a tiny bit. When I place an image smaller than 3600x3600 px, it gets placed on the canvas with its center at 1802,1802 px or 1802.5,1802.5 px It's not terribly difficult to center it after it's placed, but I'd rather not spend the 5 seconds or so every time I place an image if I don't have to.
CS5 12.0.4 64bit running on Windows 7 home 64bit
Why does every photo i open in the cs6 workspace, go black when i click on it?
View 7 Replies View RelatedI try to open mulitple ai files through palette dialog but it fails on Error:8702, there is no document. But if i change to var win = new Window ("dialog", "Batch"); the open file works well.
var txtSourceFolder = win.add("edittext",undefined);
var btnOk = win.add("button",undefined,"Run");
btnOk.onClick=function(){
try
[Code] ....
In Photoshop Elements 11, the editor workspace has stopped working and will not open.
View 3 Replies View RelatedIn PS CS3 you could open as many graphical files as you wanted, move them around on the scrren, edit them, then create a new file and copy those into it creating a composite image.
Now, with CS6, I haven't figured out how to do that yet. If I load an image, it takes up the entire workspace, with rulers going negative to hugely positive with no reason to do so. If I load another image, I can't see them both unless I tile. if there is a way to put ALL files, say 10 of them all on ONE workspace at once? I'm almost ready to go BACK to CS3!
how to convert multiple selections to multiple layers or multiple files with one go?
View 6 Replies View RelatedI need to transfer them from CS5 to CS6. I can't work without them. I looked everywhere. Where are they stored (on a Mac)? I did try that useless migration thing.
View 3 Replies View RelatedIm having some color discrepancies in ps cs2. The colors that i see on my workspace(psd) are different from the colors that appear when i save the image. Check the screen grab for an example. This effect is way more pronounced on my screen.
View 2 Replies View RelatedWhy doesn't the filmstrip open when I attempt to open multiple photos in camera row? I'm using CS4.
View 4 Replies View RelatedA month ago, a Windows update broke the version of PowerPoint I was using (on deadline, of course). The next day, while we were trying to straighten out that mess, I hit a website that downloaded a virus, which caused Win XP to blue screen within minutes. That got cleaned up immediately, and our net op set my computer to run in safe mode. After about 2 weeks in safe mode, I returned to normal access.
Since I started running safe mode, I've been unable to write to the workspace files in Ventura. I thought returning to normal access would straighten that out, but it hasn't. Neither has a reinstall. The net op has been through the registry twice, including cleaning out every key he could find before the reinstall.
Every time I close V10, I have to hit OK on half a dozen prompts. There's one for each of the four *.cfg files in the workspace folder. After the fourth one (shortcut keys), the Ventura window closes and the shortcut keys message is presented twice more.
Naturally, within VP, if I access Options, I get the four cfg prompts, and I get them again when I click OK in the Options palette. Only the cfg files are affected. The workspace *.ini files update without issue.
I just downloaded 2013 Autocad for MAC and I can't manage to see my drawing toolbars and also don't know where to find workspace settings to change my workspace to autocad classic.
View 9 Replies View RelatedI am trying to go from the 3D Modeling workspace to the 2D workspace without the XYZ coordinate gizmo on the drawing screen (just want to see the XY ucs) to work in 2D format.
View 1 Replies View RelatedI am trying to batch plot to PDF's from a drawing file that has multiple tabs in it. I would like each tab to be a separate PDF file. We are utilizing Acrobat X to write the PDF's. AutoCAD places all of the tabs into one file whether I tell a Multi-sheet file or a Single-sheet file.
View 6 Replies View RelatedI'm trying to find a way to plot multiple (over a thousand) DWG files to PDF without doing each one manually. I've played around a little bit but without any luck. I'm using AutoCAD 2002 LT. Is there any way to do this?
I've also got little to no experience with the more complex settings and abilities of autocad so do so in laymans terms.
2002 lt has no general publish (only publish to web) option and how sheet sets work.