I have 100 files by the name of happy.jpg stored in 100 different folders, and I want to open all of them together at one go instead of individually going into each folder and opening them one by one,
View 2 Replies
I have Photoshop CS3
try to open another file and it'd automatically stop working. I.E. I would get the "Photoshop has stopped working" message. This happens with any file and any file format. I can never have more than one file open.
This is a HUGE problem for me--I'm a graphic designer and it's almost impossible to work with Photoshop this way for the rest of my career. I lost my CS3 installation discs when I moved and I don't want to have to buy a new license...
You could do this in CS5, but it doesn't seem possible in CS6. It's a bit clunky when dragging from one file to another in the tab mode. I liked having the workspace open side by side.
View 1 Replies View RelatedI used to highlight multiple raw files in Bridge and just press Enter (being the equivalent to File -> Open) and the images would all open together in one ACR interface with the filmstrip down the side. Now, however, one file opens and if I hit cancel or done, the second image THEN opens, and so on and so forth. If instead of pressing Enter I choose File -> Open in Camera Raw or I right-click and Open in Camera Raw, it works fine and does what I want (or if I click the aperture symbol on the toolbar at the top).
The worst part is that it worked fine until I uninstalled CS5.1. I had CS5.1 no problem, then installed CS6/CC alongside it. I got eveything working how I wanted in CS6/CC and then uninstalled CS5.1. I may be wrong on the exact timing of the problem and therefore it may be a Red Herring, but it seems fairly close together when this started.
Notes: There is no expansion bar on the left of ACR that is just hiding the filmstrip. Which is consistant with the fact that the second image does in fact open after I close the first. So they are clearly being treated as seperate open actions. Also, in Bridge, Edit -> Preferences -> General: 'Double-click Edits Camera Raw Settings in Bridge', ticked or unticked makes no difference. Also in Photoshop, Edit - Preferences -> File Handling: 'Prefer Adobe Camera Raw for Supported Raw Files', ticked or unticked makes no difference.
I have also tried changing the above mentioned options, closing PS and Bridge so the preferences file is updates, changing them back to how I want and closing so the preferences file is updated and I get the same results.
how do you select multiple files (in this case PNGs) and open them as individual layers on one file instead of opening them as separate files?
View 5 Replies View RelatedMy engineering department produces .ps files that need to be merged into a single Photoshop file as individual layers. Here's what I'd like to do:
1) Drag a set of .ps files onto a droplet
2) For every .ps file, open with same parameters (e.g. 300 DPI, RGB)
3) Adjust Hue/Sat and set Lightness to +50
4) Colorize each layer and adjust saturation to 100%
5) Make each opened file an individual layer in NewFile.psd
6) Close/delete any intermediate files (but not the original .ps's) and leave NewFile.psd open for further editing
My current droplet will do 1-4, but now I'm stuck! How do I take all the open files and make them into layers in a new .psd?
If I can't do this directly, I can save the results of each .ps conversion into a separate .psd, but then I'll need a droplet to convert
each .psd into a layer in NewFile.psd. I can't figure how to do that, because the Override Open/Save setting seems to mess things up.
I choose OpenAs in the editor, and set to Raw, but I can only open one file at a time.
View 2 Replies View RelatedI can open one JPEG at a time, or multiple Raw images in ACR.
Have checked other sources including Barbara Brundage "The Missing Manual" but whilst it does not specifically say you cannot, likewise there is no indication that you can.
I have a builder client who sends house plans in dwg. Recently, I have been receiving a folder full of dwg files for every room, options, etc.. When I try to open, say, the first floor plan, only dimensions show up. If I open up bedroom 3, only that bedroom shows, with no dims or context. How do I get one complete plan all together?
View 2 Replies View RelatedI just re-installed windows and all the fine (PITA!) trimmings. Now, when I open a file (any type) for Inventor thru windows explorer it opens a NEW instance of Inventor everytime! This is a HUGE system hog, waste of time ect ect.
How can I correct this to just open in the instance that is already there?
Inventor 2014 PDS
im currently running a
Precision T3500
Xeon W3520
Quadro fx580
6gb ram
Win7 Ultimate
I'm only running Autocad 2013 LT on my computer without servers.
I need to open multiple files at a time with some of them being 40mb large. Problem is it takes quite sometime to open the large files.
What can i do to improve the performance of opening and working with larger files? Would adding more ram dramticaly improve it? If not, i would go about buying a new i7 cpu.
I recently had a power failure while working in AICS5 on Mac OS 10.7.5. When I restarted, AI reopened and tried to open every file I've worked on, in the last month or so.
View 6 Replies View RelatedI have been using the sheet set manager with very few problems for years until - you guessed it - I was upgraded to Windows 7 OS v6.1 and Civil3D 2012 IDS.
Up until then, I was able to open layouts in different drawing files through the sheet set manager while in an open file. Now, I get an error message (see attached) and have to close the file I'm in to open the other.
I can open files through the regular file open command and have more than one open at the same time, but it takes away the convenience of using the sheet set manager to avoid having to browse to the desired sheet layouts when copyclipping sheet layout drawing elements from one file to another.
I have studied every sheet set system variable to see if that was the problem, but could not find an answer. I have the same problem in Civil3D 2010. It happens to new and existing sheet sets in both versions and sheet sets made before the Windows update.
I try to open mulitple ai files through palette dialog but it fails on Error:8702, there is no document. But if i change to var win = new Window ("dialog", "Batch"); the open file works well.
var txtSourceFolder = win.add("edittext",undefined);
var btnOk = win.add("button",undefined,"Run");
btnOk.onClick=function(){
try
[Code] ....
how to convert multiple selections to multiple layers or multiple files with one go?
View 6 Replies View RelatedWhy doesn't the filmstrip open when I attempt to open multiple photos in camera row? I'm using CS4.
View 4 Replies View RelatedI am trying to batch plot to PDF's from a drawing file that has multiple tabs in it. I would like each tab to be a separate PDF file. We are utilizing Acrobat X to write the PDF's. AutoCAD places all of the tabs into one file whether I tell a Multi-sheet file or a Single-sheet file.
View 6 Replies View RelatedI'm trying to find a way to plot multiple (over a thousand) DWG files to PDF without doing each one manually. I've played around a little bit but without any luck. I'm using AutoCAD 2002 LT. Is there any way to do this?
I've also got little to no experience with the more complex settings and abilities of autocad so do so in laymans terms.
2002 lt has no general publish (only publish to web) option and how sheet sets work.
I am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.
My operating system is Mac OS X.
After getting no support from your phone support line. I am writing here in hopes that this issue can be resolved. I cannot open files or create new files in Photoshop CC trial.
View 3 Replies View RelatedI have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies View RelatedHow can I open multiple images at 100% PS 5.5
View 4 Replies View Relatedwhat im trying to do is open multiple images in Photoshop cs3 and then blend the images together. But the problem that i am facing is that i can only open one image at a time.
View 7 Replies View RelatedI just ran the update for my CS3 to version 10.0.1 now i am unable to open 2 photos at the same time or it crashes
View 4 Replies View RelatedAbout a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
I keep getting this random problem with Photoshop as part of my CC suite.At random times certain actions I take within Photoshop will launch multiple tabs in firefox directing me to the Adobe help page.Just now it happend when I was was within my layer 'color overlay' properties and in the process of changing the color to white.
As soon as I click my colour picker Firefox opened up about 20 tabs all pointing to Adobes help page.I couldn't save my work as every time I went back to Photoshop the same thing happened. I lost my work.I have the latest update of the 64 bit version of Photoshop.
Where in CS6 is the "button" for simultaneously viewing multiple open images? There was one in CS5.
View 1 Replies View RelatedWhen I try to open multiple raw photos from cs6 mini bridge, after selecting them, none open up. If I do one it works fine. I also tried the review mode and only one opens.
View 2 Replies View RelatedWhen the "Open Documents as Tabs" checkbox is UNCHECKED, opening multiple documents via File > Open will open them as intended: stacking them on top of each other. However, dragging multiple documents onto the PS tab in the taskbar, or dragging them directly onto PS application surface will NOT have this effect and will open the documents in tabbed mode regardless of the prefs settings. THIS IS !%$@#$ ANNOYING!!! I hope adobe considers fixing this without making me pay a gazillion bucks for another update for a bug fix.
View 2 Replies View RelatedI recently installed a student version of Maya 2012 on my home computer so I didn’t have to work from college for a project, but I have run into some issues.
Not sure what is going on with my Maya but it won't open files unless I actually go to it in the browser and double click on the file. Even once I have done that I can only save over it, save as doesn't work. I also can't create or set projects. There are probably more problems but these are the ones I noticed/really need.
This is what appears in my output window:
Could not find maya.utils._guiExceptHook.
Invalid Python Environment: Python is unable to find Maya's Python modules
Python Environment:
PYTHONHOME = C:Program FilesAutodeskMaya2012in
PYTHONPATH = C:Program FilesAutodeskMaya2012in;C:/Program Files/Autodesk/MayaPlugIn2012//scripts;C:/Program Files/NVIDIA Corporation/PhysX for Maya/Maya 2012/scripts
[code]....
I'm using Gimp 2.8.4 on a MacBook Pro.
I have been working on an image file for several hours now, and as a result, there were MANY files open (probably over 30).
I attempted to save the file, and recieved the following error message:
"Could not read the contents of [folder name] Too many open files"
I then closed each of the open files except the file I was trying to save, but got the same results.
The same error message pops up when I try to open a file as well.
