I followed the instructions starting up Lightroom 5, but, when I looked at my files that it upgraded, many file were missing. So I Imported the missing files with LR5. But then I noticed that many of the files I had imported (~3,000), had all the keywords missing! How can I fix this without reindexing the whole batch of files?
View 1 RepliesI have upgraded to Lightroom 5.3. After uploading the software, when I attempt to open the program, I get the message: "The application was unable to open correctly (0xc000007b). Click OK to close the application. I have not been able to contact Adobe for support.
View 2 Replies View Relatedi have lightroom 4 and would like to upgrade to lightroom five. will i loss any of my files when i upgrade or will the be loaded in automaticly after the upgrade.
View 3 Replies View RelatedI've got my files set to rename on import
Custom: {Date (YYYYMMDD)>>} {Custom Text} {Import # 01} >>}
However it's putting the import date on the files rather than the capture date.It's only started happening recently (this month) started with video (move) files being set to the date ahead from my Canon IXUS 220 HS
Now it's not importing the capture date for purposes of the file name.The files still say the correct date in Windows.
I have upgraded from Ltroom 3 to 5.2 and lots of differences straight away.
I have a question if
1) enable profile corrections
2) setup is Auto or Custom Or Default
3) the camera is correcr ( canon)
4) Model of the lens is correct EF17-40
5) Profile is shown as EOS-1D Mk 3
the arrows do not show any other camera and Mine is a Canon 50D, How do get the correct Profile to register also unable to update DNG files.
I've imported AI files that I want to alter using spline editing tolls like 'Outline'. I'm having to select in Pshop the area that I want to export as AI file but when I get it into Max when I want a 1' outline it goes completely out of the area. if I enter .0125" in outline I get about a 20' outline!
What am I doing wrong? How can I convert the spline's scale to work properly with 'Outline'?
A week ago all was well in Premiere Pro CS6 world. One day I updated Windows, next day all but a few .mp4 video files opened in Premiere Pro, played fine as well, EXCEPT for the fact that the display now has green (sometimes multicolour, sometimes a solid green block) bars in the lower third of the screen. See screenshot below.
These same files open/display fine in After Effects, Photoshop and VLC- and Quicktime players. I'd read something fromyears ago about Windows Updates causing this, so removed one of therecent KB's to no avail. I did install AdobeMediaEncoderTrial_64-6.0.3-mul-AdobeUpdate and DynamicLinkMediaServerRetail-1.0.1-mul-AdobeUpdate and reverted to Quicktime 7.6 but nothing makes a difference.
In the end, I formatted C:, reinstalled Windows 7 Ultimate 64bit, downloaded/installed about 260 updates and reinstalled CS6 (and then the aforementioned AME and DLMS updates and QT7.6) but it's STILL the same problem.
Also tried exporting (part of) one of these files, just to see if it wasn't just a display problem: the exported file with the same properties as the original also has the green bars.
I was using elements 8 and just purchased elements 10. the system asked if I wanted to import files / tags etc over to 10 which I said yes. It downloaded to 49%then stopped. How do I get all my photos (arouond 20 thousand) over to the upgrade. I cannot find how to go back and restart.
View 3 Replies View RelatedI have been using Photoshop CS and have found it very easy to use and navigate and was looking very forward to getting CS5.
Anyway, I have been stumbling around CS5 for a few days now and opened up a template I created in CS. This template had 2 main layers - 1) was the case or card holder and 2) was the colour of the card backs. These are then opened up in Flash as part of the slideshow.
Now, the case layer had a number of filters mainly the bevel and emboss which remained static as this was the case. The colour of the case needs to change to reflect the colour of the actual case. Another issue as well, is where is the little icon at the bottom of the Actions/History palette gone that allows you to change these filters? I cannot find the Bevel filter in the Filters menu.
how I can open the older psd files in CS5 complete with the layers (is this something that has been dropped) and also tell me where the filter button on the Actions/History palette has gone?
Even the most simple documents are not correctly exported/imported from/to CorelDRAW.
Just try to enter some graphical text using two different (uncommon) fonts... Export as SVG and re-import the file as a new document into CorelDRAW...
@ Corel: Either drop the SVG format from your import/export formats drop down box or get the standard correctly implemented.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
Trying to import an SVG file from this Wikipedia page I noticed that the text of the Brasilian flag does not get imported correctly by CorelDRAW X6.
Similar errors occur for:
Wikipedia, Spain flag
Wikipedia, Portugese flag
Wikipedia, Chinese flag
I pay for seriously expecting Corel staff members to not just read in here but to fix Corel programs' problems I report.But they do nothing.
I'm so excited to recieve my new CD in the post but... I am halfway through a design project, and if I install the new latest version Xara Photo & Graphic Designer 7
1. Will my old Xara X1 (cd version) files work in latest version if I upgrade/install XP/GP7?
2. and will they be 2 stand alone programs and can switch between the two? or overwrite each other>?
At this time I am unable to locate my original cd, which has been in mass storage, so I fear installing just to find out, otherwise I wouldnt have asked this forum, backed up my design project and tried this already.
i upgraded to CS6 photoshop and now i am having problems with multichannel photoshop files not importing correctly into CorelDraw x6. Either no channels appear at all or some will be missing or misnamed.
i realize that X6 may not have the latest and greatest import filters for the latest in Adobe products.
i have even saved the psd files as rgb and grayscale, hoping the issue was just multixhannel but that did not work.
I am using PSE 11 & Windows 7. Was working just fine. I opened up some RAW photos through the organizer; selected a file to view, and clicked on editor > photo editor to open and edit it. This worked fine, too. It would open in the RAW editing window first (where I make the RAW adjustments like exposure, etc.) and then I'd click open image and edit in PSE 11 just like I wanted to.
I did this for several photos, got up to go to the bathroom, and came back to my cat on my laptop keyboard. Of course.
Now, after rebooting, reopening PSE, rebooting again,I cannot view my photo in the editor. I go to PSE organizer, find my RAW photo, and click on editor > photo editor just like I used to. It flashes "edit in progress" just like it should, flips over to the empty PSE 11 window, and just sits there. Empty. The photo's not showing up.
I've clicked every button/setting/menu I can find. In the bottom toolbar there's the option "show open files" or "show files selected in organizer". When I click "show files selected in organizer", a tiny preview of the photo I'd selected shows up in the lower toolbar, but not in the main gray workspace. Taunting me. I've click-dragged, right clicked, etc. when I just try to open the file from PSE, instead of going through organizer, it doesn't work either.
I just imported a .csv file in Civil 3D 2014. I did so by going to the insert tab and going points from a file. I selected my file and choose the PNEZD (comma delimited ) and the point showed up. The only issue there is the point number is showing below the elevations but I am assuming that has something to do with the style settings. My real issue is when I created a 3D polyline and went to the nod I wanted to create a line from the Z coordinate was 0. Did I import the .csv file incorrectly?
When I go to the point group in prospector the point elevation is shown but when I put my curser over a point the northing and easting are correct but there is still no Z point.
I am running Mac 10.6.8 and recently upgraded to PS6. I can no longer print to my Epson 3880 nor can I open NEF files. I have applied all udates from Apple, Epson and Adobe.
View 2 Replies View RelatedI've been using v3.6 on a windows 7 PC for about 2 years. I've recently upgraded to v5.3 on the PC and at the same time have installed v5.3 on my laptop also running windows 7. On the laptop using a few new images: the smart preview, exporting and web functions work fine. On the original PC which has my original catalog of c17K images these three functions do not work. As far as I can tell the association between the masters and the images in the library has not been lost. The library and develop functions in v5.3 are working on all the c17K images in the original catalog.I've set the Export dialogue box up using recommendations from answers I've gleaned form other discussions in the forum eg; making sure the 'do nothing' flag is active in the post processing section and reducing the quality of the JPEG image. Still when I export nothing happens.
View 2 Replies View RelatedIs a direct upgrade from LR 3 (v.3.6) to LR 5.0 possible?As a rule, how many versions can a user be behind? 2, 3?
View 3 Replies View RelatedSince upgrading to LR4, I've not figured how to upgrade my catalog to LR4 also - currently it's labelled as 'Lightroom 2 catalog-2.lrcat". I'm slowly working through updating changes to 'render to LR4' but I'm uncertain if this will then automatically turn the catalog to LR4, or if I need to do this separately - and when?
View 1 Replies View RelatedI have just bought a copy of the LR5 upgrade disc on the understanding that I can upgrade from LR3 without the need to go via LR4.
However, I can not get the disc to run at all, it is not recognising the disc as having any content.
I'm using Windows 7 64 bit, LR currently 4.1. LR has been nagging me to update to 4.3. I downloaded it (twice, thinking that maybe the first download was corrupted) and everytime I try to run the installation, it does not load and basicaly everything freezes. No error message whatsover.
View 2 Replies View RelatedI installed my upgrade to LR5 last night but it keeps giving me an error when I try to upgrade my LR4 catalog. It goes through the initial steps, stays at "preparing new searchable data" for a long time, then eventually stops and pops up the error message: "Unable to upgrade catalog. Lightroom encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of Lightroom". I tried upgrading a smaller catalog that I don't use anymore and it worked fine. how I can get this catalog converted? Its my main catalog with all of my current years' images. For the time being LR 4 is working fine but I'd love to get 5 up and running.
View 2 Replies View RelatedI just opened Lightroom and was prompted to do an upgrade (4.3) now my catalogs are all gone. How can I get them back?
View 2 Replies View RelatedI am trying out the 30 day LR 5 trial to see if I would like to upgrade. For some reason my Develop Module contains the same tools as my older version, though I know I shouldn't even see a "brightness" tool.How do I fix this and get the new tools so I can continue my 30 day trial?
View 1 Replies View RelatedWhen I upgraded I did not have my back up disc connected . Many of my images in LR4 did not show up in LR5 .
View 3 Replies View RelatedMy LR 5 is developing with LR4 processing. How do I upgrade so I am developing with LR 5 develop tools?
View 4 Replies View RelatedI just upgraded my iMAC to OS 10.7.4 and started getting the following dialog box message when I tried to open Lightroom 4: "The Lightroom catalog cannot be used because the parent folder “/” does not allow files to be created within it. Please fix the folder permissions or choose a different catalog" I have changed the permissions to read/write for the drive, parent folder and catalog file.
View 5 Replies View RelatedI have LR 3 and I would like to upgrade to LR 4. Can I install the upgrade to LR 4 and still keep my LR 3 installation intact so that I can switch back and forth between the two versions if I want to?
View 2 Replies View RelatedI can't import ANY images to LR 4.4 since upgrading my Mac OS to Mountain Lion 10.8.3 this past week. I downloaded LR5 Beta and all works well. I deleted LR5 Beta to see if it was conflicting with LR4.4 somehow and rebooted. Still no change. I can't import from my card reader (that says it can't even read the files) or from a location on my hard drive. The error message for importing is "Could not copy a file to requested location."
View 7 Replies View RelatedWhen I used LR3.6 The Library option listed all my files on the left hand side under 'Folder' and showed a sub-folder for each year 2009-2012. I have now upgraded to LR4, and all I can see is 2011. During the install process of LR$ it asked me if I wanted to upgrade the process model, which I said yes and it did. Then, because I had read that 4.1 fixed a lot of issues, I downloaded and installed RC4.1 which I am running now.
How do I make LR4 show me all my Folders? I don't think I should be re-importing them all.
Somehow our watermark function on the library>export process is no longer working after the 4.3 upgrade today. We created a new test watermark and that did not work either.
View 6 Replies View Related