I've imported AI files that I want to alter using spline editing tolls like 'Outline'. I'm having to select in Pshop the area that I want to export as AI file but when I get it into Max when I want a 1' outline it goes completely out of the area. if I enter .0125" in outline I get about a 20' outline!
What am I doing wrong? How can I convert the spline's scale to work properly with 'Outline'?
Even the most simple documents are not correctly exported/imported from/to CorelDRAW.
Just try to enter some graphical text using two different (uncommon) fonts... Export as SVG and re-import the file as a new document into CorelDRAW...
@ Corel: Either drop the SVG format from your import/export formats drop down box or get the standard correctly implemented.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
I just imported a .csv file in Civil 3D 2014. I did so by going to the insert tab and going points from a file. I selected my file and choose the PNEZD (comma delimited ) and the point showed up. The only issue there is the point number is showing below the elevations but I am assuming that has something to do with the style settings. My real issue is when I created a 3D polyline and went to the nod I wanted to create a line from the Z coordinate was 0. Did I import the .csv file incorrectly?
When I go to the point group in prospector the point elevation is shown but when I put my curser over a point the northing and easting are correct but there is still no Z point.
well - how to scale an image correct! I am pretty new to GIMP and i want to scale an image.
what is wanted: want to have an image with approx 300 x 200 pixel:
currently it (the image called Demo-image.jpg) has a size of approx 580 x 260 pixel.
First of all; i open a new window - (with 1080x540 pixel)
then i open my Demo-image.jpg in this newly created window - Question: should i drop in this Demo-image.jpg as a new layer or as a new picture. guess that this is pretty important. Unfortunatly i do not have any glue!?
Then i take the marker tool and mark the whole Demo-image.jpg - and afterward i choose (out of the toolbox -) the scaling-tool. Now i try to scale down the Demo-image.jpg.
If i am lucky then the scaling -dialogue pops up. Then i can see some values; height and width - What now happens is totally misterious: Whatever i do:
a. playing with the numbers (/height or width)
b. taking the demo-image.jpg with the "mouse" and tryin to scale "manually by shifting the edges...
All i do - it has no effect.
Recently when I click on an image/layer to rescale (like I have done hundreds of times) the height figure resets to 1 px. When I try to increase it back to the original figure, nothing happens apart from weird lines that appear below the image. It started yesterday, after I was in the middle of a project and Gimp crashed (which it has never done before). It does not matter how many new projects I start, after a while the scale tool stops working.
View 7 Replies View RelatedUsing ACAD 2013 64 bits. I am trying to insert a block created in inches (by another company), in a drawing created in meters, but it is not working. This is the initial setup: Block-drawing's units are set to inches, type Architectural. My drawing's units are set to meters, type decimal. So far so good, I guess. Then, I proceed to open my drawing, execute the insert block command and select the Block-drawing. Once selected, I can see in the dialog box . Block unit clearly reading inches and the correct scale factor of 0.0254. However, when click OK, the drawing is huge. I check it's properties and the block's geometry is correctly set at an insertion scale of 1, 1, 1; but, in Misc, the block unit is now "meters" and the unit factor is "1"! This means that one inch equals one meter. This does not happen when I create the blocks; in those cases it works as it should.
View 4 Replies View RelatedI have a problem exporting a file to TIFF format as the text spacing becomes "corrupted".The text is just a simple text block, pick any font you want (i.e. Arial). I export the file as TIFF format with the following changes of note:
Do not select "Maintain Aspect Ratio".Change the vertical scaling to something like 140% (nothing magical about 140%, just something that stretches it out enough)
That's it. When the text comes out, the letters are all stuck together, either overlapping or touching. This happens with TIFF, PNG or BMP format, but it does not happen when I export GIF or JPG format. Of course, converting the text to curves prior to export also produces the correct result.
Of course, the reverse also happens if I scale vertical to less than 100%, the characters get spaced out farther than they should. I cannot really convert to PNG then to TIFF as I need to maintain the CMYK colorspace on this one. I also do not "pre-scale" the image correctly in CorelDraw first because I actually need to export the image to several different aspect ratios and I would like to maintain only one "master" source image.
I am trying to get the door swing arc to scale correctly as the width of the box is changed.
But the block is defying logic by scaling the arc radius exactly 5 units short of what it should be.
I've tried deleting, recreating, and chaining the parameter over and over only to have the same problem each time.
I've imported a PDF file and I'm trying to do a quantity take-off by finding the area of certain areas (this is a landscape plan). However, I'm having trouble calibrating the scale so 10' on my plan is 10' according to AutoCAD as well.
View 2 Replies View RelatedI imported a model from Sketchup into 3DS Max. When I apply materials to some of the surfaces, the scale of the texture varies from face to face, these are the triangles that make up a polygon. It's as if the texture is getting stretched or compressed in one direction or another. Other polygons allow for consistent materials. It seems to be random and I can't figure out what to do.
View 2 Replies View RelatedI am using Photoshop Elements 10 Version 10 (20110831.m.17215) and everytime I plug in a memory card to upload images it wants to upload every image on the card, even though it has previously uploaded images from that card, even though I have the "Copy New Files Only (Ignore Already Imported Files)" box ticked in the preferences Camera or Card Reader section. This gets very frustrating and time consuming when I have to go through the images every single time to uncheck the images that have already been uploaded.
View 3 Replies View RelatedThis message comes up when I try to import to light room. A box comes up that says "Import Results" then the error message shows with a group of file numbers that wouldn't import.
View 1 Replies View RelatedI've got my files set to rename on import
Custom: {Date (YYYYMMDD)>>} {Custom Text} {Import # 01} >>}
However it's putting the import date on the files rather than the capture date.It's only started happening recently (this month) started with video (move) files being set to the date ahead from my Canon IXUS 220 HS
Now it's not importing the capture date for purposes of the file name.The files still say the correct date in Windows.
I followed the instructions starting up Lightroom 5, but, when I looked at my files that it upgraded, many file were missing. So I Imported the missing files with LR5. But then I noticed that many of the files I had imported (~3,000), had all the keywords missing! How can I fix this without reindexing the whole batch of files?
View 1 Replies View RelatedA week ago all was well in Premiere Pro CS6 world. One day I updated Windows, next day all but a few .mp4 video files opened in Premiere Pro, played fine as well, EXCEPT for the fact that the display now has green (sometimes multicolour, sometimes a solid green block) bars in the lower third of the screen. See screenshot below.
These same files open/display fine in After Effects, Photoshop and VLC- and Quicktime players. I'd read something fromyears ago about Windows Updates causing this, so removed one of therecent KB's to no avail. I did install AdobeMediaEncoderTrial_64-6.0.3-mul-AdobeUpdate and DynamicLinkMediaServerRetail-1.0.1-mul-AdobeUpdate and reverted to Quicktime 7.6 but nothing makes a difference.
In the end, I formatted C:, reinstalled Windows 7 Ultimate 64bit, downloaded/installed about 260 updates and reinstalled CS6 (and then the aforementioned AME and DLMS updates and QT7.6) but it's STILL the same problem.
Also tried exporting (part of) one of these files, just to see if it wasn't just a display problem: the exported file with the same properties as the original also has the green bars.
I have been using Photoshop CS and have found it very easy to use and navigate and was looking very forward to getting CS5.
Anyway, I have been stumbling around CS5 for a few days now and opened up a template I created in CS. This template had 2 main layers - 1) was the case or card holder and 2) was the colour of the card backs. These are then opened up in Flash as part of the slideshow.
Now, the case layer had a number of filters mainly the bevel and emboss which remained static as this was the case. The colour of the case needs to change to reflect the colour of the actual case. Another issue as well, is where is the little icon at the bottom of the Actions/History palette gone that allows you to change these filters? I cannot find the Bevel filter in the Filters menu.
how I can open the older psd files in CS5 complete with the layers (is this something that has been dropped) and also tell me where the filter button on the Actions/History palette has gone?
Trying to import an SVG file from this Wikipedia page I noticed that the text of the Brasilian flag does not get imported correctly by CorelDRAW X6.
Similar errors occur for:
Wikipedia, Spain flag
Wikipedia, Portugese flag
Wikipedia, Chinese flag
I pay for seriously expecting Corel staff members to not just read in here but to fix Corel programs' problems I report.But they do nothing.
I have LR loaded on my MacBook Pro and everything was alright in terms of LR operation. I use a 5D MKII camera and always shoot in RAW (CR2). I always download images from the Card to the HDD and then import it to LR. However, CR2 Raw files are not getting imported and I am getting the following error message - "The files appear to be unsupported or damaged".
I can still import other files like .tiff and .jpg files.
i upgraded to CS6 photoshop and now i am having problems with multichannel photoshop files not importing correctly into CorelDraw x6. Either no channels appear at all or some will be missing or misnamed.
i realize that X6 may not have the latest and greatest import filters for the latest in Adobe products.
i have even saved the psd files as rgb and grayscale, hoping the issue was just multixhannel but that did not work.
I am using PSE 11 & Windows 7. Was working just fine. I opened up some RAW photos through the organizer; selected a file to view, and clicked on editor > photo editor to open and edit it. This worked fine, too. It would open in the RAW editing window first (where I make the RAW adjustments like exposure, etc.) and then I'd click open image and edit in PSE 11 just like I wanted to.
I did this for several photos, got up to go to the bathroom, and came back to my cat on my laptop keyboard. Of course.
Now, after rebooting, reopening PSE, rebooting again,I cannot view my photo in the editor. I go to PSE organizer, find my RAW photo, and click on editor > photo editor just like I used to. It flashes "edit in progress" just like it should, flips over to the empty PSE 11 window, and just sits there. Empty. The photo's not showing up.
I've clicked every button/setting/menu I can find. In the bottom toolbar there's the option "show open files" or "show files selected in organizer". When I click "show files selected in organizer", a tiny preview of the photo I'd selected shows up in the lower toolbar, but not in the main gray workspace. Taunting me. I've click-dragged, right clicked, etc. when I just try to open the file from PSE, instead of going through organizer, it doesn't work either.
I'm trying to import a couple of models from the google warehouse into Photoshop CS5 extended.
They open without an error, but aren't visible.
I tried following this KB article: [URL] ..........
The script throws a syntax error:
Line: 68
-> var Construct0r = function() { };
I've also stepped through the parts of the model in the 3d palette looking for elements that have the opacity set incorrectly, but they all seem to be set to 100%.
I see the kb article is from january 2011; Is there a newer version of that script
if there is a log or register of files that have been imported into a drawing. I'm currently importing landxml files alot and sometimes would like to confirm which files were imported. I can start my own register but wondered if c3d is doing it already?
View 2 Replies View RelatedI have been recently and reluctantly put in a graphics position for large format printing. a customer sent a job in an e-mail, and called to say he wanted the text a different color. For the life of me I can't figure out how to do it. Is it possible? it's an eps file that has some graphics, but mostly text.
View 2 Replies View RelatedAfter importing folders into LR, are there any issues with going into those folders and moving out .png, .gif, .pdf and other files that LR does not import?
View 1 Replies View RelatedAfter I updated to 3.6 I could no longer preview the pictures on the card or camera regardless of the format. Prior to 3.6 I had no problem.. I did not change ,y preferences but I checked them to be sure and can see nothing that deals with this.
View 3 Replies View RelatedI'm now getting the error message: "The following files were not imported because they could not be read (189)." Not sure why this would appear after years of successfully importing.
View 7 Replies View RelatedI recently had a number of old transparencies scanned at a local service bureau and delivered as jpegs on disc. The images import just fine into Lightroom from the disc, but when I try to rename them, I get a dialogue box telling me I can't rename them "...because they are missing or not writable." Thinking, perhaps, that Lightroom was somehow trying unsuccessfully to rename them on the source disc, I tried downloading them to my computer first, ejecting the disc, then importing them into Lightroom. Same result. What am I doing wrong? How do I rename these images?
View 1 Replies View RelatedI have a foler with just over 5065 images that I am trying to import, but when the imprt dialogue window comes up, it only shows 4995. Have tried unchecking the 'dont import duplicates' and have trried multiple times, but for some reason it only registers 4995 images. Where the other 75 could be hiding? all the other folders in the main folder imported fine..
View 9 Replies View RelatedFirst time I have gotten this error while attempting to import.
View 2 Replies View RelatedI'm using LR 4 on a Mac.I've been an LR user for three years.I few days ago I imported 500+ images from a folder in Apple Finder into LR.The import was successful because I deleted a few photos and made adjustments to a few right after finishing the import.
Today I went back into LR to continue working on the remaining images and the folder I imported them into is not visible.When I search using a filename and Find under Library in LR, I'm told that no Photos match.Trying to re-import the images results in a message that the photos are already in LR!
is there a workaround to prevent Photoshop modify the scale of 3D objects when importing them ?
In fact, PS try to optimize thesize of the object regarding the size of the picture...I should prefer either the opposite or nothing at all, to allow me to define the definition and the resolution of the file to allow me to print at scale 1:1 the different views of my model in orthographic view...
In addition it could also render different object imported one by one (at their respective scale) and merge in a single layer...