Photoshop :: Layered Files Not Open Correctly In CS5
Jul 10, 2012
I have been using Photoshop CS and have found it very easy to use and navigate and was looking very forward to getting CS5.
Anyway, I have been stumbling around CS5 for a few days now and opened up a template I created in CS. This template had 2 main layers - 1) was the case or card holder and 2) was the colour of the card backs. These are then opened up in Flash as part of the slideshow.
Now, the case layer had a number of filters mainly the bevel and emboss which remained static as this was the case. The colour of the case needs to change to reflect the colour of the actual case. Another issue as well, is where is the little icon at the bottom of the Actions/History palette gone that allows you to change these filters? I cannot find the Bevel filter in the Filters menu.
how I can open the older psd files in CS5 complete with the layers (is this something that has been dropped) and also tell me where the filter button on the Actions/History palette has gone?
View 5 Replies
ADVERTISEMENT
Aug 28, 2008
I have a large 300 M layered pdf file that when I attempt to open eventually pops up the "not enough memory (RAM) message.
I am on a windows XP Power Spec computer with 1.97 GB RAM I have allocated 1106 MB for memory useage, 12 history states and 8 cache level.
I have a 187 GB Seagate exterior harddrive as my main scratch disk and a mirrored main drive C with 154 GB of free space as my second scratch disk.
I also experience a canvas disapearance occasionally when using the polygonnal lasso tool. I can be clicking along and all of the sudden the image disapears until I click again. Annoying but not unworkable.
View 2 Replies
View Related
Dec 16, 2007
I'm doing a gif animation in PS and have five pictures that I need to have as layers on the top of each other. At the moment I'm opening them and copy-pasting them on one of the images to make layers, but this is slow and sometimes confusing with all the images open at the same time.
Is there any way to just tell Photoshop to open all the files so that they are automatically stacked on the top of each other as layers?
View 11 Replies
View Related
Dec 31, 2012
I have had this problem so much I have switched back to using CS5 Photoshop when I handle layers. For some reason when I have a multi-layered photoshop file in CS6 and I try to save - it gives me a program error. This doesnt happen all the time just when I have been working on a document for a long length of time ( maybe something to do with auto save?) The only way I can save the file is to flatten but then I loose all of my hard work and layers!
View 3 Replies
View Related
Aug 20, 2008
I can no longer save layered .psd files to any folder. What does get saved is only a generic file symbol.
I'm using a Dell 8200 computer, 1GB of RAM, IntelPentium4 processer, Windows XP Professional,and a Canon MP780 multiple function printer.
View 3 Replies
View Related
Nov 19, 2008
Is there any way to edit a layered .png file in Photoshop CS2?
I've got a layered .png file, and when I open it in Photoshop it's just one flat image.
If Photoshop can't open the file and preserve the layers, does anyone know Fireworks can save the .png as a layered .psd file that I can then edit?
View 2 Replies
View Related
Oct 2, 2012
I've created a collage using Microsoft Picture It! by cutting images out of photographs and layering them. Can I open this file in Photoshop Elements and be able to move the layered images around separately?
View 1 Replies
View Related
Oct 22, 2013
I've been sent a layered PSD of a website design by a client. The file contains bitmap images, text, simple shapes and smart objects. We're going to create an animation using the design and therefore need to produce a vector version of the design in Illustrator (except for the bitmapped elements which we have large format version of).
is there a way of taking the layered PSD in to Illustrator which will convert as much of the design as possible in to vectors (including the smart objects), make the text editable and save hours of our time having to rebuild the site pretty much from scratch in Illustrator.
Ive imported it in already as an experiment. Although quite successful, none of the smart objects convert to vector and it looks like all of the text is un-editable and some of it causes missing font messages even though the fonts a definitely there.
View 1 Replies
View Related
Nov 20, 2013
I've created a New image and selected Open Layer to bring another image in, however the 'other' Open layer image' appears in the center of the newly opened image space. How can I move the Open layered image around?
View 1 Replies
View Related
Oct 25, 2013
I am using CS6, as is the other user. When they open the file in Illustrator all the artwork is on one layer, even though the original file has numerous layers, and opens with these layers when I open it even now.I have never come across this problem before in all the years I have used Illustrator and have had no joy when trying to search for this problem.
View 4 Replies
View Related
Jan 9, 2013
I recently updated my adobe software and I am still getting issues with saving layered files. I keep gettting program error - only occasionally. Sometimes saving to my desktop works and other times it doesnt. Other coworkers are experiencing same thing ever since they updated.
It happens when working on a layered file for any length of time and need to save it out as a layered photoshop file. We are forced to flatten and save as a tif and loose our layers. I think it has something to do with background task but not sure...
View 2 Replies
View Related
Dec 10, 2012
Being an architectural photographer I create a lot of layered files with many exposures with different lights on and daylight separately. I always save my layered files in a folder called Layered files in the project. I also save flattened 8 bit Tif's at full resolution for my client as a print file in a separate folder along with another folder for web and device optimized files. When my client opens some of my flattened files they tell me the only see one layer. When I open some of them in Preview I get the same result. I only see the last layer I put into my layered file. But when I open the same photo in Bridge I see the full flattened file as I saved it. What can I do about that?
View 3 Replies
View Related
Feb 14, 2013
10.7.4/Mac Pro/PhotoshopCS6 13.0 - When cmyk converting a multilayered rgb file layers containing transparency doesn't convert to same profile as layers not including transparency, e.g. a product with a shadow - each on separate layers.
the product layer is converted to working Color settings but the transparent layer isn't and is converted completely different, both grayscale and UCR/GCR.
View 14 Replies
View Related
Jul 1, 2013
Why does Illustrator CS5.5 crash when opening 1.5GB sized vector layered files on my iMac OS X?
View 2 Replies
View Related
Jul 8, 2013
I saved a file as a .tif and it saved as normal then I shut down Photoshop and then the PC. The next day when I try to open the file it doesn't open correctly it opens but the right hand side of the photo is on the left and the left hand side of the image is now on the right, its like its been cut in half and put back the wrong way.
It also didn't open with the layers only as a locked background. When I view the file in the icon it looks fine until I open it.
View 3 Replies
View Related
Feb 16, 2013
can i convert a non layered file to a layered file bases on used colors?
View 4 Replies
View Related
Sep 24, 2012
Environment: CS6 (PS 13.0.1) Mac OS X 10.7.5. Plenty of hardware. (Generally starting with .CR2 RAW.)Recently (maybe since the 13.0.1 update??), I have been having problems with the open and save as dialog boxes.
First. The open file dialog always defaults to Enable: blank (i.e. no file types enabled). Each time I have to go to the bottom of the dropdown list and select "All readable documents" before I can open ANY type of file. I've searched in everyway I can think of looking for some method to have OPEN default to "all readable" but can't find anyway to do this. when whipping around at deadline having to stop each time and make this change is irritating. No other program has this difficulty (including Illustrator and InDesign). PS 5.5 did not exhibit this behavior on the same machine.
Second. When I save as and try to select any file format, say going from psd to tiff, the format dropdown list ALWAYS selects the format ABOVE the one I choose. Example: If I select JPEG, PS tries to save as .iff. If I pull the selection down to JPEG2000 it will then save as standard JPEG. Again just an irritant but, tiff (which I need for several other programs) is last on the list thus there is no way I can go one below it to get tiff format selected. It always comes out as png. Also note that the Format selection indicates the correct format - in the case of tiff the dialog box shows TIFF selected, but the program is appending .png. (Continuing the save as (without altering my selection) always results in the incorrect format no matter what the Format dialog says in the save as operation.) Again, no other program I work with (including several Adobe products) exhibits this behavior.
I seriously need to be able to save as tiff.
View 12 Replies
View Related
Dec 9, 2013
Will Photoshop correctly open a psd file saved using PSP X16? Will all layers remain intact?
View 1 Replies
View Related
Jan 5, 2014
MY AI Will not operate correctly it will not open as it should and it will not let me update it keeps saying error u44m147 so i try to uninstal and reinstal it wonlt let me proceed!
View 1 Replies
View Related
Jan 23, 2013
i upgraded to CS6 photoshop and now i am having problems with multichannel photoshop files not importing correctly into CorelDraw x6. Either no channels appear at all or some will be missing or misnamed.
i realize that X6 may not have the latest and greatest import filters for the latest in Adobe products.
i have even saved the psd files as rgb and grayscale, hoping the issue was just multixhannel but that did not work.
View 5 Replies
View Related
Sep 28, 2013
I am using PSE 11 & Windows 7. Was working just fine. I opened up some RAW photos through the organizer; selected a file to view, and clicked on editor > photo editor to open and edit it. This worked fine, too. It would open in the RAW editing window first (where I make the RAW adjustments like exposure, etc.) and then I'd click open image and edit in PSE 11 just like I wanted to.
I did this for several photos, got up to go to the bathroom, and came back to my cat on my laptop keyboard. Of course.
Now, after rebooting, reopening PSE, rebooting again,I cannot view my photo in the editor. I go to PSE organizer, find my RAW photo, and click on editor > photo editor just like I used to. It flashes "edit in progress" just like it should, flips over to the empty PSE 11 window, and just sits there. Empty. The photo's not showing up.
I've clicked every button/setting/menu I can find. In the bottom toolbar there's the option "show open files" or "show files selected in organizer". When I click "show files selected in organizer", a tiny preview of the photo I'd selected shows up in the lower toolbar, but not in the main gray workspace. Taunting me. I've click-dragged, right clicked, etc. when I just try to open the file from PSE, instead of going through organizer, it doesn't work either.
View 4 Replies
View Related
Aug 15, 2013
I am having an issue placing my Ai file, saved multiple ways, in InDesign without losing quality? Maybe save settings or a step-by-step? I work between Ps, Ai, Id often but just started using Ai to create my own graphics.
View 1 Replies
View Related
Jan 24, 2014
I have upgraded to Lightroom 5.3. After uploading the software, when I attempt to open the program, I get the message: "The application was unable to open correctly (0xc000007b). Click OK to close the application. I have not been able to contact Adobe for support.
View 2 Replies
View Related
Jan 4, 2012
I've imported AI files that I want to alter using spline editing tolls like 'Outline'. I'm having to select in Pshop the area that I want to export as AI file but when I get it into Max when I want a 1' outline it goes completely out of the area. if I enter .0125" in outline I get about a 20' outline!
What am I doing wrong? How can I convert the spline's scale to work properly with 'Outline'?
View 1 Replies
View Related
Jan 6, 2012
I've got my files set to rename on import
Custom: {Date (YYYYMMDD)>>} {Custom Text} {Import # 01} >>}
However it's putting the import date on the files rather than the capture date.It's only started happening recently (this month) started with video (move) files being set to the date ahead from my Canon IXUS 220 HS
Now it's not importing the capture date for purposes of the file name.The files still say the correct date in Windows.
View 11 Replies
View Related
Jun 14, 2013
I followed the instructions starting up Lightroom 5, but, when I looked at my files that it upgraded, many file were missing. So I Imported the missing files with LR5. But then I noticed that many of the files I had imported (~3,000), had all the keywords missing! How can I fix this without reindexing the whole batch of files?
View 1 Replies
View Related
Mar 8, 2014
A week ago all was well in Premiere Pro CS6 world. One day I updated Windows, next day all but a few .mp4 video files opened in Premiere Pro, played fine as well, EXCEPT for the fact that the display now has green (sometimes multicolour, sometimes a solid green block) bars in the lower third of the screen. See screenshot below.
These same files open/display fine in After Effects, Photoshop and VLC- and Quicktime players. I'd read something fromyears ago about Windows Updates causing this, so removed one of therecent KB's to no avail. I did install AdobeMediaEncoderTrial_64-6.0.3-mul-AdobeUpdate and DynamicLinkMediaServerRetail-1.0.1-mul-AdobeUpdate and reverted to Quicktime 7.6 but nothing makes a difference.
In the end, I formatted C:, reinstalled Windows 7 Ultimate 64bit, downloaded/installed about 260 updates and reinstalled CS6 (and then the aforementioned AME and DLMS updates and QT7.6) but it's STILL the same problem.
Also tried exporting (part of) one of these files, just to see if it wasn't just a display problem: the exported file with the same properties as the original also has the green bars.
View 10 Replies
View Related
Jul 1, 2013
Even the most simple documents are not correctly exported/imported from/to CorelDRAW.
Just try to enter some graphical text using two different (uncommon) fonts... Export as SVG and re-import the file as a new document into CorelDRAW...
@ Corel: Either drop the SVG format from your import/export formats drop down box or get the standard correctly implemented.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 2 Replies
View Related
Jan 5, 2013
Trying to import an SVG file from this Wikipedia page I noticed that the text of the Brasilian flag does not get imported correctly by CorelDRAW X6.
Similar errors occur for:
Wikipedia, Spain flag
Wikipedia, Portugese flag
Wikipedia, Chinese flag
I pay for seriously expecting Corel staff members to not just read in here but to fix Corel programs' problems I report.But they do nothing.
View 13 Replies
View Related
Dec 20, 2013
I just imported a .csv file in Civil 3D 2014. I did so by going to the insert tab and going points from a file. I selected my file and choose the PNEZD (comma delimited ) and the point showed up. The only issue there is the point number is showing below the elevations but I am assuming that has something to do with the style settings. My real issue is when I created a 3D polyline and went to the nod I wanted to create a line from the Z coordinate was 0. Did I import the .csv file incorrectly?
When I go to the point group in prospector the point elevation is shown but when I put my curser over a point the northing and easting are correct but there is still no Z point.
View 9 Replies
View Related
Jan 21, 2009
I am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.
My operating system is Mac OS X.
View 3 Replies
View Related
