Photoshop :: Scaling Objects When Imported 3D Files?
Apr 3, 2013
is there a workaround to prevent Photoshop modify the scale of 3D objects when importing them ?
In fact, PS try to optimize thesize of the object regarding the size of the picture...I should prefer either the opposite or nothing at all, to allow me to define the definition and the resolution of the file to allow me to print at scale 1:1 the different views of my model in orthographic view...
In addition it could also render different object imported one by one (at their respective scale) and merge in a single layer...
View 1 Replies
ADVERTISEMENT
Nov 3, 2011
I have a dwg that someone imported and I cannot find where this object is. I have tried searching the database with DBLink, Ideate BIMLink and I have gone into every view to no avail. I also used the reviTTools add-in which says there are no drawings in the file. Am I dealing with a corrupted file? I am super OCD and this is in our Template which makes it an even bigger problem.
View 2 Replies
View Related
Jan 28, 2014
I've imported an image into gimp, I then have imported another image using File open as layers.
Once this second image is imported it's obviously far too large, I want it to easily sit within the first image.
However when I right click > image > scale image it alter's both of them at once. It does this whether I have both images showing or not.
View 3 Replies
View Related
May 4, 2011
I have been given an incomplete plan view of a site with access roads and have been asked to extend the roads to meet up with a main road off site. Not having any survey points I figure the most accurate thing to do was to screenshot a Google map image, import it into my drawings and trace it. I'm struggling to scale the map image to my existing drawings.
The problem I'm having is when i click the image to scale, it obscures the view of the drawing, so I can't see anything to reference. Is there a way to make the image transparent? Or to have it permanently at the back.
View 9 Replies
View Related
May 20, 2012
How do you scale 3D objects in CS6? The scale tool has disappeared in CS6 as opposed to CS5. There's got to be an easy way, I just can't figure it out.
View 5 Replies
View Related
Jan 31, 2013
I am a C# developer and not very familiar with coreldraw(when using with c#). My problem is that i am programmatically importing image on a curve using the following C# code.
d.ActiveLayer.Import(imgpath);// image path is path of the cdr file
var v = d.ActiveShape;
v.SizeHeight = 20.00;
v.SizeWidth = 15.00;
v.AddToPowerClip(s);
Now when i run this code the image gets placed into the curve bit it gets stretched vertically means the face of a student(that comes from imagepath) get stretched vertically..When i do this Manually with scaling and sizing ratio locked it gets properly inserted in curve....
View 2 Replies
View Related
Nov 13, 2013
In Photoshop CC, smart objects that have a layer mask, always say they're at 100% (width and Height) even if they've been resized. If there is NO mask, the correct size appears. I hate this. It wasn't like this before, at least in CS4. Any reasons for this?
View 7 Replies
View Related
Jul 16, 2013
how line art changes when scaling object in AI CC? For example I have a logo file to deliver to client that doesn't have the font. In AI CS6 and below you can hold the shift key and resize objects smaller and keep the shape's intergrity. I've noticed in AI CC that resizing fonts converted to paths smaller does not hold the characters shape as well as previous versions of Illustrator. I understood the industry practice of converting fonts to paths as the last thing to do prior to shipping out a design to production. But what happens to logo files that get sent out to clients/vendors, for these files it is paramount to keep the shape intact.
View 16 Replies
View Related
Mar 13, 2013
I am having problems to scale 2d objects I use the command scale but when it request a base point it said "extremely small scale factor ignored" I have to do this 5 or 6 times until the command works.
The other thing is that I can not do a 1 dimension scale in 2D.
View 1 Replies
View Related
Jul 16, 2011
I created objects and extruded them and then I adding materials from the Autocad 2011 material library. I added brick to a wall and I was wondering what command I would have to type in to "scale" the brick size or just have a way so that the material will appear larger on the object because the bricks are quite small.
View 3 Replies
View Related
Apr 5, 2013
I can't get certain graphics to scale down correctly correctly.
Take a look at the 2 jpegs enclosed - one solid, the other with 1px outline. The graphic men were originally 40mm tall.
In each case the one on the left is the original. The one on the right is the same graphic reduced to 25% then enlarged to 400%. Both should look the same.
How to stop these distortions from happening? I've tried adding and releasing Compound Path, Grouping and Ungrouping, Selecting and deselecting 'Scale Stroke and Effects'. No combination works!
I'm especially confused about 'Scale Stroke and Effects'. Surely when it's selected, the outline should reduce to 0.25 px. It doesn't - it stays at 1px.
View 9 Replies
View Related
Jun 13, 2012
When I type in the command "SC" for scaling the object, it'll asks me to specify base point then I can enter what scale I want it to be, such as 2 times or 0.5 for half sacle.
with the new 2013 version, sometimes it'll exit the command if I select the insertion point of the block or if the object is at the 0,0,0 location of the drawing. it'll also give a message of "the scaling factor is too small". But I haven't enter what scale I want to scale the object yet.
View 1 Replies
View Related
May 24, 2012
I would like to scale all objects by x2 in Model Space using reference point xyz=0. Just like one would do via scale command. However, I would like to do so programmatically in VB.NET
View 2 Replies
View Related
Jun 27, 2013
I have two "drawing title" lines in my block when I use the, stretch, move, scale parameter the attributes lose the position (the drawing titles lines are stacked) and will not scale with the rest of the objects. I tried all tricks that I could possibly think of but no success.
maybe LT2012 has a bug that does not allow me do this correctly?
LT 2012 User
Windows 7 professional
View 8 Replies
View Related
Dec 27, 2013
I am using Photoshop Elements 10 Version 10 (20110831.m.17215) and everytime I plug in a memory card to upload images it wants to upload every image on the card, even though it has previously uploaded images from that card, even though I have the "Copy New Files Only (Ignore Already Imported Files)" box ticked in the preferences Camera or Card Reader section. This gets very frustrating and time consuming when I have to go through the images every single time to uncheck the images that have already been uploaded.
View 3 Replies
View Related
Oct 26, 2012
how you get objects, say i drew a rectangle, to the correct size from model space to paper space. And why when you change the dimensions of an object to meters from milimeters, does it not change the size of the object on paperspace when it's at the same scale.
View 2 Replies
View Related
Feb 28, 2013
CorelDrawX6 user reporting that she imports a PDF file into CorelDrawX6 (Windows 7 pro, 64-bit system, version is X6 with update 2 and Hot patch applied, Windows OS is fully updated). Taking a pdf file scaling up to full scale, she is not getting the correct measurements. She tested it to see if the same thing happened on another user's computer that is XP Pro XP3 with CorelDraw X5 and it does not have the same issue.
So it may be in CorelDraw X6 (she moved to X6 recently). Also, she said it does not happen consistently. Yesterday this was a problem, today with the same file it appears to be OK.
View 6 Replies
View Related
Oct 30, 2012
After drawing in model space(1:1 Scale) I then dimension as needed using Annotative Dimensions, Multileaders and MText using the same 1:1 scale. But when I create the variuos viewports on my layout pages the dimensions aren't scaling to the viewport scale.
This is where it may be partly my fault; When I first started using annotative dimensions etc. a box would pop up asking what scale to use. Because I am dimensioning in model space, rather than always seeing this text box I selected "Do not ask again" check box to always use 1:1 scaling.
These are some of the other settings in place;
ANNOAUTOSCALE = 4
Annotation Visibility = ON
Automatically Add Scales = ON
View 3 Replies
View Related
Nov 24, 2013
I have this problem with my selection tool i use to scale with my selection tool now all of a sudden i cant scale it gives me a block you can drag the object around but you can't scale the object for a fast scaling.. where do i change the setting of the selection tool back to scaling an object..
View 1 Replies
View Related
May 18, 2013
I'm importing my Revit file and when I try to select only the roof to apply materials it gives me a selection of "Wood-Sheathing-particlboard/osb" which includes the second floor sheathing and other things I don't want in my selection.
I thought I could add an edit poly modifier and select the individual roof polygons and apply materials to them but when I "Apply materials to selected objects" it applies to all of the wood sheathing,... selection.
How do I break these apart and re-name them?
View 2 Replies
View Related
Nov 14, 2012
(3ds max 2012, mental ray rendering) I would like to know how to separate objects from an imported model. For example, I have imported a bed with side tables, pillows, throw rug, etc- when it is imported into my scene all items are grouped together, so one click, anywhere, selects all items. I have used the Edit mesh function to delete the items I don't need but now I want to isolate each part of the model and apply different material finishes. When I hold the curser over each item they seemed to be named separately, as 'objects'. How do I detach these items from the imported model?
View 2 Replies
View Related
Jun 26, 2012
I love annotative scaling of objects it is a great feature. I am however having one problem that I'm not sure if I've missed a setting or something. Is there a way to prevent civil 3d from scaling your annotative objects based on the view scale you are looking at? For example if I zoom out (in model space or max viewport) to show my entire drawing and regen, civil 3d scales all my text and blocks to an enomous scale esentially blocking my entire drawing with solid colour. also if I zoom into a small area to do some detail work all my text becomes microscopic and unuseable. This makes adjusting text so it doesn;t overlap other text very difficult if it never appears at the correct size. Is there a way to freeze annotative objects at thier correct scale (for the current viewport scale) so they dont scale simply because you zoom in or out on a drawing?
View 3 Replies
View Related
Mar 1, 2013
I need to scale up about 300 circles (manholes) but i need to hold the center point of each manhole. is there a command for this so i don't have to scale each individual circle?
View 6 Replies
View Related
Feb 21, 2014
I created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)
View 19 Replies
View Related
Dec 9, 2012
I have a problem: when i scale objects (even if I do a proportional scale clicking "Shift" button), the program automatically modify the alignment and the form of the object. for example if i scale a "stickman" which is completely symmetric, finally I have a figure with arms of different dimensions and proportions. Im using the cs5
The problem is not about the stroke dimension, is the path that is modified.
View 3 Replies
View Related
Oct 14, 2013
I'm trying to import a part from solidworks. I've tried opening the .SLDPRT file, converting to IGES (203 and 214), and STEP. All give the same result.
See below pictures - the Maya import has "dingleberries" where there should be a flat surface (i.e. some of the tubes extend when they shouldn't). I know imports are rarely perfect, and that's OK as long as I know how to clean things up. How can I trim off the extra surfaces that appeared after the import? I'd just use an extruded cut in SolidWorks, but I'm in a strange land with Maya.
First - the part looks like this in SolidWorks:
But Maya sees:
View 1 Replies
View Related
Apr 28, 2013
I have included a xref scene in another file and but the xref when rendered does not respect hidden layers, hidden object OR "do not render' option set in layer manager. In other words all of the objects including the hidden ones are displayed. How I can leave my reference objects and layers in my original scene but not display them if I include the file as an xref scene.
View 1 Replies
View Related
Apr 22, 2013
I have two art objects on two layers. I want to match to the pixel the two objects that otherwise could be exactly the same but one layered object was imported slightly smaller.
The scale tool has good scale handling, I just want to measure the tool spots to the pixel to gain an exact scale size factor and match sizes.
View 2 Replies
View Related
Jun 12, 2012
I'm trying to import a couple of models from the google warehouse into Photoshop CS5 extended.
They open without an error, but aren't visible.
I tried following this KB article: [URL] ..........
The script throws a syntax error:
Line: 68
-> var Construct0r = function() { };
I've also stepped through the parts of the model in the 3d palette looking for elements that have the opacity set incorrectly, but they all seem to be set to 100%.
I see the kb article is from january 2011; Is there a newer version of that script
View 5 Replies
View Related
Jul 22, 2006
I have been recently and reluctantly put in a graphics position for large format printing. a customer sent a job in an e-mail, and called to say he wanted the text a different color. For the life of me I can't figure out how to do it. Is it possible? it's an eps file that has some graphics, but mostly text.
View 2 Replies
View Related
Dec 18, 2012
This message comes up when I try to import to light room. A box comes up that says "Import Results" then the error message shows with a group of file numbers that wouldn't import.
View 1 Replies
View Related
