I created objects and extruded them and then I adding materials from the Autocad 2011 material library. I added brick to a wall and I was wondering what command I would have to type in to "scale" the brick size or just have a way so that the material will appear larger on the object because the bricks are quite small.
View 3 RepliesI'm rendering an equipment shelter that sits atop a gravel pad. I've picked the "Gravel Crushed" material, and it looks OK, but I'd like to be able to scale the material so it isn't so "fine". I'd like it to be more coarse.
How to change the scale of the material?
I'm using Max Design 2013 to render Revit models.
Linking the RVT file into max works well and all materials are scaled visually as expeected. The problem comes with replacing materials.
I'm working in Metric files in MM.
As an example I've got a wall in Revit with Brick, Common material attached, The image file used is Brick_Non_Uniform_Running_Burgundy.png which is 5 bricks wide x 16 brick courses tall. When rendered this look correct on the model.
However, I;ve I drop another Autodesk brick material onto the wall in Max the scaling is messed up. When I've noticed is that the scale on the Bitmap in Max of the Revit material is 3.33mm x 3.89mm The scaling of the bitmap of the Max material (same numbers of bricks) is 1016x1187mm.
Whats going on between Revit and Max that causes this behavior?
I am having problems to scale 2d objects I use the command scale but when it request a base point it said "extremely small scale factor ignored" I have to do this 5 or 6 times until the command works.
The other thing is that I can not do a 1 dimension scale in 2D.
When I type in the command "SC" for scaling the object, it'll asks me to specify base point then I can enter what scale I want it to be, such as 2 times or 0.5 for half sacle.
with the new 2013 version, sometimes it'll exit the command if I select the insertion point of the block or if the object is at the 0,0,0 location of the drawing. it'll also give a message of "the scaling factor is too small". But I haven't enter what scale I want to scale the object yet.
I would like to scale all objects by x2 in Model Space using reference point xyz=0. Just like one would do via scale command. However, I would like to do so programmatically in VB.NET
View 2 Replies View RelatedI have two "drawing title" lines in my block when I use the, stretch, move, scale parameter the attributes lose the position (the drawing titles lines are stacked) and will not scale with the rest of the objects. I tried all tricks that I could possibly think of but no success.
maybe LT2012 has a bug that does not allow me do this correctly?
LT 2012 User
Windows 7 professional
how you get objects, say i drew a rectangle, to the correct size from model space to paper space. And why when you change the dimensions of an object to meters from milimeters, does it not change the size of the object on paperspace when it's at the same scale.
View 2 Replies View RelatedAfter drawing in model space(1:1 Scale) I then dimension as needed using Annotative Dimensions, Multileaders and MText using the same 1:1 scale. But when I create the variuos viewports on my layout pages the dimensions aren't scaling to the viewport scale.
This is where it may be partly my fault; When I first started using annotative dimensions etc. a box would pop up asking what scale to use. Because I am dimensioning in model space, rather than always seeing this text box I selected "Do not ask again" check box to always use 1:1 scaling.
These are some of the other settings in place;
ANNOAUTOSCALE = 4
Annotation Visibility = ON
Automatically Add Scales = ON
how to apply materials to objects. I have made my objects and am ready to apply a material to them. I typed materials into command and the table pops up where you can render a material. I then chose my material and i see it at the bottom of the table where i can edit. All is good at this point. Now, I go back to top of table and choose apply material to objects and a little paint brush icon appears. I go and try to highlight objects and it does but when i click nothing happens. Am I missing something or is there another approach?
Just in case, I am drawing a basketball court and want to put a wood floor down. I went to the material list and chose one of the woods/plastics.
I love annotative scaling of objects it is a great feature. I am however having one problem that I'm not sure if I've missed a setting or something. Is there a way to prevent civil 3d from scaling your annotative objects based on the view scale you are looking at? For example if I zoom out (in model space or max viewport) to show my entire drawing and regen, civil 3d scales all my text and blocks to an enomous scale esentially blocking my entire drawing with solid colour. also if I zoom into a small area to do some detail work all my text becomes microscopic and unuseable. This makes adjusting text so it doesn;t overlap other text very difficult if it never appears at the correct size. Is there a way to freeze annotative objects at thier correct scale (for the current viewport scale) so they dont scale simply because you zoom in or out on a drawing?
View 3 Replies View RelatedI just wanted to add some materials to my objects and it seems some menu entries on Toolpalettes are missing (masonry etc.). I installed the full version of AutoCAD 2012 and also downloaded some additional material libraries. I'm attaching some screenshots of missing menu items and a screenshot of installed items in control panel.
View 3 Replies View RelatedI need to scale up about 300 circles (manholes) but i need to hold the center point of each manhole. is there a command for this so i don't have to scale each individual circle?
View 6 Replies View RelatedHow do you scale 3D objects in CS6? The scale tool has disappeared in CS6 as opposed to CS5. There's got to be an easy way, I just can't figure it out.
View 5 Replies View Relatedhow line art changes when scaling object in AI CC? For example I have a logo file to deliver to client that doesn't have the font. In AI CS6 and below you can hold the shift key and resize objects smaller and keep the shape's intergrity. I've noticed in AI CC that resizing fonts converted to paths smaller does not hold the characters shape as well as previous versions of Illustrator. I understood the industry practice of converting fonts to paths as the last thing to do prior to shipping out a design to production. But what happens to logo files that get sent out to clients/vendors, for these files it is paramount to keep the shape intact.
View 16 Replies View RelatedI am using Autocad 2011 just download it and its all perfect if you consider that I was stuck with 2008 before...
My problem is that I m creating objects from the tool palette (doors, windows, walls) and I cant change their material..
In Photoshop CC, smart objects that have a layer mask, always say they're at 100% (width and Height) even if they've been resized. If there is NO mask, the correct size appears. I hate this. It wasn't like this before, at least in CS4. Any reasons for this?
View 7 Replies View RelatedI can't get certain graphics to scale down correctly correctly.
Take a look at the 2 jpegs enclosed - one solid, the other with 1px outline. The graphic men were originally 40mm tall.
In each case the one on the left is the original. The one on the right is the same graphic reduced to 25% then enlarged to 400%. Both should look the same.
How to stop these distortions from happening? I've tried adding and releasing Compound Path, Grouping and Ungrouping, Selecting and deselecting 'Scale Stroke and Effects'. No combination works!
I'm especially confused about 'Scale Stroke and Effects'. Surely when it's selected, the outline should reduce to 0.25 px. It doesn't - it stays at 1px.
In Section View the material region is filled with a solid hatch, this obscures other objects such as the bounding surfaces and labeling.
For some reason the material hatch is always on top in the display order Manually forcing it to the back in the display order is possible. This is not a reasonable solution due to the time involved and repetition.Transparency allows the objects beneath to be visible but their tool tips are not functioning due to the overlap. The same would apply to using something other than a solid hatch.
The primary concerns are:
Visibility of all objectsSelectibility of objectsTooltip functionality
is there a workaround to prevent Photoshop modify the scale of 3D objects when importing them ?
In fact, PS try to optimize thesize of the object regarding the size of the picture...I should prefer either the opposite or nothing at all, to allow me to define the definition and the resolution of the file to allow me to print at scale 1:1 the different views of my model in orthographic view...
In addition it could also render different object imported one by one (at their respective scale) and merge in a single layer...
CorelDrawX6 user reporting that she imports a PDF file into CorelDrawX6 (Windows 7 pro, 64-bit system, version is X6 with update 2 and Hot patch applied, Windows OS is fully updated). Taking a pdf file scaling up to full scale, she is not getting the correct measurements. She tested it to see if the same thing happened on another user's computer that is XP Pro XP3 with CorelDraw X5 and it does not have the same issue.
So it may be in CorelDraw X6 (she moved to X6 recently). Also, she said it does not happen consistently. Yesterday this was a problem, today with the same file it appears to be OK.
I have this problem with my selection tool i use to scale with my selection tool now all of a sudden i cant scale it gives me a block you can drag the object around but you can't scale the object for a fast scaling.. where do i change the setting of the selection tool back to scaling an object..
View 1 Replies View RelatedIs there anyway to animate fading in/out of objects when using this material? I searched and couldn't find something that worked. I tried creating a blend material but that didn't seem to work.
edit: actually blending materials works. i thought the values went from 0 to 1.0. but it's from 0 to 100. but the render time is crazy long. are there any more efficient methods?
I created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)
I have a problem: when i scale objects (even if I do a proportional scale clicking "Shift" button), the program automatically modify the alignment and the form of the object. for example if i scale a "stickman" which is completely symmetric, finally I have a figure with arms of different dimensions and proportions. Im using the cs5
The problem is not about the stroke dimension, is the path that is modified.
I am wondering if it is possible to assign a newly created or current material to multiple selected objects? I've searched in the forum and investigate right-mouse menu in Mudbox 2012 but still couldn't find a way to assign a material to multiple objects at once.
View 2 Replies View RelatedWhy the drawing title in my dynamic block will not scale up or down. The rest of the objects scale properly but just this the drawing title text attribute will not follow suit.
I tried adding position point and link, etc....I run out options and don't know how to fix this.
LT 2012 user
AutoCAD LT 2012
Windows 7 - 64 bit
I have a problem trying to import objects to load their correct material properties. The textures are all there but I have to reset there specular properties everytime. Even if I import the same object straight after I export it with the materials properly set, I still have to reset them all over again. Is there a setting somewhere like in Customize that I can change to make the objects maintain their properties on import?
View 4 Replies View RelatedI am having trouble having objects set to 'Phase Created' = Existing to show a desired material. They are all a dark grey.
I have gone into 'Manage', and "Phases" under 'Phasing', and under the tab, 'Graphic Overrides', changed 'Material' for 'Existing to "Phase - New". But this did not change anything.
Where else does this get changed?
Using 2013.
I can delete every unused material except one in the Material Editor.I am trying to make the custom Material library and somehowI have got the Material I cannot delete. URL....
View 9 Replies View RelatedI am in the samill building buisness. While designing I thought it would be nice to show logs on our equipment. Is there anyway to show bark on drawings to show the texture on the final drawing?
View 1 Replies View Related