Is there anyway to animate fading in/out of objects when using this material? I searched and couldn't find something that worked. I tried creating a blend material but that didn't seem to work.
edit: actually blending materials works. i thought the values went from 0 to 1.0. but it's from 0 to 100. but the render time is crazy long. are there any more efficient methods?
When I embed my animation and look at it in Mozilla or IE9+, it looks fine (URL...)
But when I check it out in Chrome, some of the characters fade in the middle of it, many don't change colors as they are supposed.URL....
correct process for animating a Material color change using AutoKey and the Curve Editor.
Right now, I am only able to crudely manipulate the color change by setting the material color change while the AutoKey is active.
The problem is that I am unable to control the speed/time at which the color change actually transpires in the scene.
So far, the only solution I have found, is to set the color change hundreds of frames after the point at which I want the color change to actually occur.
Normally, I would go into the curve editor and and manipulate the keys for the color change to slow or speed up the transition, and to control the exact timing.
However, even though I am able to locate the color change key(s) in the Curve Editor, I either do not know how to properly manipulate them, or I don't know what keys I actually want to manipulate.
I am accustomed to sliding keys left and right and using null keys to hold a key frame (in the this case the color prior to change, which is grey, and then the color after the change, which is fuchsia. however sliding keys around in the curve editor, when I have the "fuschia" key(s) selected (I misspelled the name, so in the file it is "fuschia" not "fuchsia"), does not seem to affect the actually timing of the color change.
FYI, the material that I am attempting to animate is the "fuschia" material in the Compact Material Editor.
i need to make his image into a site.. now i got some ?'s
he is using it for wallpapers, he wants the wallpapers part of the main image on its own layer, so that it is translucent then when you go over it, it will go to full color (no tranparency). do i have to do this as a gif and make it a rollover or something, do i need to make it a seperate image?
how to apply materials to objects. I have made my objects and am ready to apply a material to them. I typed materials into command and the table pops up where you can render a material. I then chose my material and i see it at the bottom of the table where i can edit. All is good at this point. Now, I go back to top of table and choose apply material to objects and a little paint brush icon appears. I go and try to highlight objects and it does but when i click nothing happens. Am I missing something or is there another approach?
Just in case, I am drawing a basketball court and want to put a wood floor down. I went to the material list and chose one of the woods/plastics.
I created objects and extruded them and then I adding materials from the Autocad 2011 material library. I added brick to a wall and I was wondering what command I would have to type in to "scale" the brick size or just have a way so that the material will appear larger on the object because the bricks are quite small.
View 3 Replies View RelatedI am wondering if it is possible to assign a newly created or current material to multiple selected objects? I've searched in the forum and investigate right-mouse menu in Mudbox 2012 but still couldn't find a way to assign a material to multiple objects at once.
View 2 Replies View RelatedI just wanted to add some materials to my objects and it seems some menu entries on Toolpalettes are missing (masonry etc.). I installed the full version of AutoCAD 2012 and also downloaded some additional material libraries. I'm attaching some screenshots of missing menu items and a screenshot of installed items in control panel.
View 3 Replies View RelatedI have a problem trying to import objects to load their correct material properties. The textures are all there but I have to reset there specular properties everytime. Even if I import the same object straight after I export it with the materials properly set, I still have to reset them all over again. Is there a setting somewhere like in Customize that I can change to make the objects maintain their properties on import?
View 4 Replies View RelatedI am using Autocad 2011 just download it and its all perfect if you consider that I was stuck with 2008 before...
My problem is that I m creating objects from the tool palette (doors, windows, walls) and I cant change their material..
In Section View the material region is filled with a solid hatch, this obscures other objects such as the bounding surfaces and labeling.
For some reason the material hatch is always on top in the display order Manually forcing it to the back in the display order is possible. This is not a reasonable solution due to the time involved and repetition.Transparency allows the objects beneath to be visible but their tool tips are not functioning due to the overlap. The same would apply to using something other than a solid hatch.
The primary concerns are:
Visibility of all objectsSelectibility of objectsTooltip functionality
I am having trouble having objects set to 'Phase Created' = Existing to show a desired material. They are all a dark grey.
I have gone into 'Manage', and "Phases" under 'Phasing', and under the tab, 'Graphic Overrides', changed 'Material' for 'Existing to "Phase - New". But this did not change anything.
Where else does this get changed?
Using 2013.
I'm trying to create an animation of a group of objects being assembled, then being placed in a box. once i've assembled each object, how can I move / rotate all objects simultaneously as if one complete object?
When I try the attach command, it removes all previous animation on each individual object.
I need to animate the hide and unhide of a set of objects, I know I can use the visibility track to do this, but I have two issues with this, one, this will not hide it from the view while animating or looking at it in wireframe, which makes it difficult since I'm doing some previz and I need the object gone from the wireframe view... Two, there is an object (I bought them) that refuses to take the visibility track coming from the master object, and it does not have its own one, so I don't have a clue why it ignores it.
Also know that I can suddenly move the object out of the camera view, but was trying to see if there was something a bit more elegant than this, a script to animate the hide and unhide of a groped object would be the ideal thing, but searching the web for it didn't return anything useful.
Say I have 400 boxes and I want to animate each box to move up and down along the z axis randomly. How would I go about doing that? I assume somehow with the noise modifier, but I can't figure out how to get it to work with motion and not the shape of the object.
View 3 Replies View RelatedI'm creating an animation of a magic 8 ball rolling towards the screen, getting larger as it comes forward. Now that the animation is complete, I would like to put it on an ease path to make the motnion look more realistic. Unfortunatley, when an easein is set for the 8 ball, it will skew the shapes, and everythign sort of flies off in all directions and then lands back where it should be at the end.
How it looks with an easein during the animation, and how I would like it to look during the animation.
How can I animate the actual path, NOT objects on a path. I am trying to animate on screen as if someone is writing text. Or spelling their name out. I can't figure this out. How to do this using indesign?
View 1 Replies View RelatedI started an animation requiring a multitude of objects and I'm starting to find it difficult to remember which one is which when they are all called "round rect," "rect 2 copy 2," etc. I found it easier to animate if I let them remain as objects rather than symbols, but it has started to become difficult to determine which object I need to animate next. I tried turning them into symbols, but it seems to complicate things more for me.
View 1 Replies View RelatedIs possible mask an image/ text inside a circle objetc with overflow hidden?Even I put an image/ text nested circle object + overflow hidden...The results is always the box edge, not the circle shape.
View 5 Replies View RelatedI want to scan all divs (objects) with the same class (box)
when any of them are clicked a function in called?
function check() {
var items = document.querySelectorAll(".box");
for (i = 0; i < items.length; i++) {
items[i].onclick = showinfo;
[Code]...
this syntax works in the browser but not in edge;
I would like to animate a serie of objects I made with the blend tool in Illustrator. It is an object that transforms into another one, I am trying to put this into a small animation like a gif.
I have also Photshop but I know better Illustrator, so I tried to export each of these objects in separate jpg files
but couldnt find a way.
I am trying to animate a mass production plant where objects move along conveyor belts.
When I apply pathdeform modifier to a single object with defined curved spline, there's no problem with the animation.But when I attach multiple objects to form single polygon the deformation path messes up.Objects astray from their initial positions before attaching.
I can delete every unused material except one in the Material Editor.I am trying to make the custom Material library and somehowI have got the Material I cannot delete. URL....
View 9 Replies View RelatedI am in the samill building buisness. While designing I thought it would be nice to show logs on our equipment. Is there anyway to show bark on drawings to show the texture on the final drawing?
View 1 Replies View RelatedI have an existing HTML page (created in Adobe Muse) and I am trying to draw some Adobe Edge objects on top of the page (e.g. a rectangle or an image). When I look in the layers panel, the Edge objects show as top in the list. However, visually when I look at the page, the elements show behind the pre-existing HTML page from Muse.
View 3 Replies View RelatedI upgraded to 3DsMax 2011 and still have some problems navigating the Slate Material Editor. I want to create a Mix material as the "first" material but I'm only able to double click on the Sample Slot to get a standard material in the "View1" as my "first" material. I am able to create a "Mix" node here, but it has to be connected to the "Standard" material and this makes it so that i can not drag the material in to the "Environment and Effects" tab as my "Environment Map".
When i go back to the "Compact Material Editor" (which waists time), I can select the Standard icon but "Maps" is not available in the "Material/Map Browser" when i right click on an open space.
Im on Max 2011 with sp1 and the latest hotfix installed, working with vray 1.5 sp5. When i try to re-set mu material editor (compact not slate) i get the folllowing error message
"Runtime error: cannot assign undefined to material editor slots" and a Macro_media utilities window opens with the following script
macroScript clear_medit_slots
enabledIn:#("MAX", "VIZ")
category:"Medit Tools"
internalCategory:"Medit Tools"
ButtonText:"Reset Material Editor Slots"
tooltip:"Reset Material Editor Slots"
[code]....
I'm not a scripter but it seems that there is no material defined to place into the slots on re-set. I've recently had a problem with my material editor not giving me acess to slate as i had loaded up my 2010 menus into 2011 but i've since re-installed max and vray and am still getting this.
I want to center an animate stage left and right in the browser window.
View 2 Replies View Related1. crolling like where you have buttons for example or press on a navigation bar tab, then it goes to that specific pace of the page, for a one page website, for example some sites you press on contacts and gose down to the bottom of the page where the contacts place is located, not opening a new link.
2.Second, navigation bar, where it fallows the scroll as it gose down, like for example when it is html the object is fixed to the top, and when you scroll down it will fallow it it,
3.I need Parallex scrolling where you can have the timeline or animations run while you scroll in the meantime and have animation running all the time, for example the infographic site where the bees are fluying but still have seperate animations while you scroll
4.I would also like to ask if like looping each animations sperately, not looping the whole timeline, can it be possible to loop an animation while you have all the interactivity witht he site like looping seperately all the time, without interfeering with all the other animation
5.I also are wondering if you can create multiple pages on one animate project, like multiple pages with html
I just moved on to edge animate from html, and html was also beirf learn for me and mostly i was doing design work, and i thought getting out of graphic river and moving on the theme forest.
I want also all the five things to work on one aimate project.
Is it possible to get the text color to FadeIn or the opacity of the text color to animate with the lines of code below? I simply want the color to fade in when the mouse rolls over the text.
Symbol.bindElementAction(compId, symbolName, "${_writing_btn}", "mouseover", function(sym, e) sym.$("writing_btn").css("color","#88ACBE");
});
[Code].....
I'd like to animate snow falling. I assume Edge would be able to do this. Will it be possible to add it as a background? Or would it just be easier to add the effect to the top graphic portion of my page? I've used Edge back when it first came out. But havent' touched it in a while. I'm now working "in the Cloud". and I do use Dreamweaver.
View 5 Replies View Related