Photoshop :: Reverting To Original RAW Image In ACR?
Nov 5, 2012
In the past I have almost always used Nikon's Capture NX2 as my RAW editor. In that, it's immediately obvious how to get back to the original NEF camera image, or even choose to go back to different stages in the editing history.
There seems no obvious way to do this in ACR. For example I made a mistake in a RAW edit, but when I reopened the RAW image again from Bridge I got the edited version with the unwanted error., I would like ACR to do what Nikon Capture can do.
I have also just found that, when trying to assign a keyword to this file in Bridge, I got got an "...error writing metadata" message. All the other NEF files in that folder (none of which have yet been edited in ACR) accepted the keywords with no problems.
Since writing the above, I have found that this "error writing metadata" is a common issue for which there seems no solution - it extends back to earlier versions of Bridge (I have CS6 64-bit with vety latest updates).
View 4 Replies
ADVERTISEMENT
Jun 24, 2006
I have edited a picture using MS Paint. Its a mistake actually, i accidentally CUT a portion off ( the portion becomes white space ) and save it.
When i view the picture in Photoshop, Picasa, or any other image viewer, the white space is there. However, when i see my picture in thumbnail mode in My Pictures folder, the original image is there ( the thumbnail is unedited ). Question is, anybody can advice me how can i get the original picture back? Is there any way i could go around?
View 1 Replies
View Related
Sep 22, 2013
I'm trying to create a pretty simple "starfield" by using noise and then playing with the Levels. When I go to adjust the levels, everything looks good in the preview. However, when I click "ok" the image reverts back to what it looked like before, with maybe a VERY slight change, but nowhere close to what my preview had shown originally. I'm not sure what could be causing this, but it does the same thing whether I try levels, brightness/contrast, and threshhold.
View 1 Replies
View Related
Jul 24, 2012
I just finished a logo design in corel draw x5.The design was made on a a4 dimensions.I copy the elements to paste them into a much smaller canvas but the image when minimized is pixelated not vectored as the original.
How can I paste the image and the image is as the original (vectored)?
View 8 Replies
View Related
Sep 20, 2013
Sometimes when I start up Photoshop CS6, I discover that all my preferences have reverted to defaults.
View 5 Replies
View Related
Sep 20, 2006
I've been noticing that my preferences for Photoshop (and InDesign too) occassionally revert back to their defaults on their own (rulers default back to pixels or picas, workspace defaults back to the original state and so forth). It was mildly annoying, but does anyone know why this is happening? Has anyone else experienced this? Not the most earth-shattering of problems but obviously not normal...(makes you wonder if something more serious may be lurking behind the scenes).
I know to change rulers permanently you need to do it with all documents closed, so that's not it (I'm sure that would be everyone's first piece of advice).
Particulars: CS2, Windows XP (I'd like to blame Windows!), doesn't appear to be any pattern to when it occurs other than it happens on a relaunch of the program, not in mid-stream while you're working. More interesting, I see it happening on 3 different systems (which makes me think it's something with Adobe or Windows, not my flukey PC )
View 2 Replies
View Related
Apr 21, 2013
This is a huge problem for me, and it's getting incredibly annoying.
This issue is when I import an image (drag and drop, or other ways as well) into Photoshop and the image appears in a really small size. I need to be extremely percise in all of my projects by the pixel, I can't have it going a single pixel larger or smaller. But when I drag it in, it shows up much smaller and I have to drag the boundries to make it larger. I basically just want to drag a 64x96 image in, and have it actually show up as 64x96, not incredibly smaller.
I don't know the size of a portion on the canvas, because I can't just guess, so it's impossible to actually stretch it to its original size and actually be accurate.
View 4 Replies
View Related
Jun 14, 2012
In CS3 I would duplicate an image in order to soft-proof before printing. By going from full to partial screen I could then identify both original and duplicates and could pull them into adjacent positions. In CS6 that doesn't work How do I separate my two images and place them next to each other?
View 2 Replies
View Related
Oct 28, 2006
Does anyone know how I can crop an image, but keep the original proportions of the image? Is there a way to crop and manually set the crop size?
View 3 Replies
View Related
Jan 26, 2006
I love taking landscape photos and i am interested in turning them into black and white images. No problem with that bit, i then want to make the black and white more intense, i realise this will be difficult with the black but i want the white to be, i don't know slightly more silver i suppose, more haunting......am i making sense, lol.
I would also like to keep some color from the original image, maybe have a tree with just a faint coloring from the original or a stream with just a hint of the original blue.
I don't know how to transfer the original color to the black and white copy, is it done with a mask?.
View 3 Replies
View Related
Nov 6, 2007
I am trying to match the color.
The original is the manufacturer's, #1.
Shot at 2007-11-06
My photo is the yellowish, this is my original photographed image, #2.
Shot at 2007-11-06
The third is my closest attempt to color correct: (Color Balance: Midtones- Red +10, Green +40, Blue +72, Shadows- Cyan -5, Green +8, Blue +13, Highlights- Cyan -4, Green +5, Blue +12), #3.
View 5 Replies
View Related
Sep 1, 2012
Ever since I downloaded the latest 13.0.1 update to CS6 two days ago, my custom settings keep resetting to every time I close down and reopen the program. Even my custom brushes keep disappearing and require reloading. This is getting maddening! Why is it happening and what can I do to fix it?
View 2 Replies
View Related
Aug 7, 2013
I want to edit on a certain layer, for example layer 1: My current layer happens to be layer 2, so: I click on layer 1 to make it current. I do the editing & it isn't quite what I want, so I undo theaction. As I undo the action, CS6 also undoes my layer change (i.e makes tolayer 2 current again) even though I want layer 1 to remain the current one. Is there any way to change this in edit preferences or somewhere?
View 6 Replies
View Related
Jun 17, 2012
If I select Edit Content on a Smart Object layer, and then select Duplicate Layer, will that put two copies of the original image in the file?
I used the Place command to bring high resolution images into a canvas of a much lower resolution. I've already spent a lot of time scaling and positioning the images on the canvas. But it turns out, I would now like to do certain editing on the original pixels of the images because of their greater resolution. Of course, that defeats the purpose of Smart Objects for non-destructive editing.
But there's no reason I can't keep two copies of an original image in a file, and destructively edit only one copy, right?
View 6 Replies
View Related
Mar 8, 2012
I have a image i want to convert orginal image to sharp lineart how can i do photoshop CS3.
View 8 Replies
View Related
Sep 9, 2004
I'm using version 5.5 in Windows 2000. I am confused because all other images in other programs etc appear normal whereas in photoshop 5.5 they have a greenish tinge. I corrected this on the original image by choosing View > Preview > Uncompensated RGB. However, if I try colour adjustment etc e.g. variations, all the preview images still have the green tinge. Does anyone know how to correct this?
Also Uncompensated RGB is supposed to be the default view, but when I close PS the setting is lost and on opening, all images including the original are back to green. What am I missing? I have other versions 5.5 and CS on other pcs with no problems.
View 2 Replies
View Related
Oct 3, 2008
way of adding colour to a black and white picture? I have the original in colour, but I want to change it to black and white and then put a bit of the original colour back into a couple of places...
View 2 Replies
View Related
Jan 6, 2003
I'm trying to save a file as web content (either jpg or gif) but when I save the file it is much darker than the original.
If I view the saved version of the file in PS there are no issues, but once I view it in a browser, the issue arises.
Is there a way to control this? I've never had this problem before while working with photographs or other files.
For the record I'm using PS 6.0 for PC and the browser I'm using is IE 5.5.
View 3 Replies
View Related
May 11, 2012
I found what I think is a bug in Photoshop CS6. The Pen tool keeps reverting back to the "Exclude" boolean mode every time you select the Pen tool. In previous versions of Photoshop, the boolean mode stayed at whatever mode it was set at when no paths were selected.
View 17 Replies
View Related
Aug 12, 2012
I've been using photoshop CS6 since it came out of beta, and I've been happy with 99% of the interface changes, except for some of the the new tool cursors which now have arrows in the upper left corner. I've been meaning to post this a while ago, but it seemed that the forums were offline.
One example is the crop tool, but what mainly hinders me are the lassos and paint bucket cursor icons. Is there any way I can replace those with the original ones from cs5 and prior?
When you pick up a tool, and it has an icon of an object (i.e. a lasso), your instinct is to look at and use the tip of that object, not some little black arrow in a corner.
For example, you wouldn't want to have an arrow next to your text cursor, or next to your magic wand cursor, would you? You'd want to use the tip of the wand.
I'm not sure what part of the user community suggested these little arrows be added on those tools, but I find it to be a bad design idea. And it's an annoying choice imo, beacause it doesn't make sense from an interaction design point of view, and not because it would be hard for me to get wrid of my habit of using the tip of the lasso, and to get used to the arrow instead. It's bad, because now, there are two conflicting pointers in the same tool: the icon tip and the arrow tip.
[EDIT] I'm sure people will say that they prefer the new design, arguing about "design consistency" and whatnot. So this is why I ask if there's a way for me to replace the cursors in my photoshop, not everyone's.
View 18 Replies
View Related
Oct 12, 2013
I am trying to rename a folder, after I type in the new name it reverts back to the old name.
View 1 Replies
View Related
Nov 17, 2013
I am editing .CR2 files using camera raw, and when I save the edited version as a .tiff, my changes are being applied to my original .CR2 as well. I am losing the original .CR2 files.
View 3 Replies
View Related
Jan 13, 2014
When you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies
View Related
Dec 5, 2012
I made a PNG logo transparent, and when I go to save the new transparent logo in PNG format, the quality has dropped significantly from the original. I have done nothing other than delete the background of the logo, why is this happening in a lossless format? What can I do to fix this or increase the quality of the transparent logo?
View 10 Replies
View Related
Feb 23, 2012
I have a very large piece of artwork in my possession. The artwork was originally drawn in high-resolution on a computer, but a true digital copy of the original is not available to the public.
My copy of the artwork is large enough such that the original pixels can just barely be distinguished by the naked eye. I would like to scan it in at extremely high resolution, or take photos of it (multiple photos of various sections may be necessary for enough resolution). Afterwards, I am wondering if Photoshop, some available filter, or other image-processing program would be able to analyze this ultra-resolution scan and reconstruct a perfect copy of the original digital image?
The idea is that if I can see the original pixels with my eye, Photoshop should be able to likewise deduce all the original pixels of the original digital image, and reconstruct it as such via some algorithm, in the original resolution.
View 6 Replies
View Related
Nov 4, 2012
When transforming I am unable to increase size from original .image is stretched outside box but parts of image is outwith original size and is unseen.
View 3 Replies
View Related
May 28, 2013
There seem to be a problem with PSE10 and PSE11 on my computer when loading image files digitized on my film scanner. When loaded into the editor the image file immediate takes today’s date and time, and thus changes place on the timeline. However, sometimes the original image file date remains intact, for no obvious reason. I find this very frustrating.
My setup is an HP computer running Windows7 Ultimate 64 bit, with i7 processor and 12GB memory. My film scanner is a Minolta Dimage Elite II working with a Windows XP-based computer, and data are transferred using memory stick.
It might be mentioned that I have made tests with a fixed set of image files on several computers running WindowsXP 32 bit, and several versions of PSE , including PSE10, without seeing this problem.
View 5 Replies
View Related
Jun 25, 2013
I have upgraded from pse9 to 11 and after selecting a photo in organiser then viewing in full screen and enlarging to 100% then exiting, organiser loses the highlight and reverts to the first photo. This also occurs when the photo is edited and saved you have to find where the editedd photo has gone to, it is time consuming when you have a large number of photos in the organiser. pse9 did not do this.Also pse11 does not sort photos properly by the shot date especially when the photos ard edited
View 1 Replies
View Related
Nov 21, 2012
There are times when I want to re-import an image but am not allowed to do so even when I un-check "do not allow duplicate imports"
View 8 Replies
View Related
Nov 27, 2012
my problem is when i open cad 2012, the cursor keep become big.. i already try revert to default and it back to normal but when i close the program,cursor will revert again become big and hard to do draft.
My spec :
Acer aspire 4736z laptop
windows 7 64bit
4gb ddr2 ram
intel GMA 4500m graphic with latest driver
View 3 Replies
View Related
Feb 18, 2013
I have an action which applies Levels and Curves to my black and white TIFFs. At the end it "saves as" a JPEG. Originally it saved them at quality level 10 but I re-recorded the action to set the quality at 12. However, since this change the action keeps saving as into the folder where the image I used for the re-recording was located.
View 1 Replies
View Related
