I found what I think is a bug in Photoshop CS6. The Pen tool keeps reverting back to the "Exclude" boolean mode every time you select the Pen tool. In previous versions of Photoshop, the boolean mode stayed at whatever mode it was set at when no paths were selected.
View 17 RepliesI cannot seem to add the pen tool button.
I know there is a general way to do this but it seems to elude me at the moment. I go to the button palette and can use the tool from there but would prefer that is was on the side bar.
How to the fix the little buttons (icons) on the tool palette(s)?
Sometimes, by mistake, I drag an (or many) icon(s) to another place. I work with autocad 2010.
I'm setting up some custom toolbars and that's no problem, but what I'd like to do is have one of the buttons be a toggle, so the icon changes depending on what state it is in. I'm just having a bit of trouble figuring out how I find those buttons programatically from within C#. I've included Autodesk.Autocad.Customization which gives me the Toolbar, Tool bar button, etc classes, but I don't know how to find the existing toolbars from the running session of AutoCAD.
View 9 Replies View RelatedI just downloaded de Maya 2013 bonus tools, and when I use the auto unwrap tool, the buttons that used to cut, select, continue even cancel dont show; but the "click area" still works, the problem is to find it
In Maya 2012, this plugin works fine unfortunately I dont have access to that version anymore.
I'm always having to move my tool windows around, out of the way, or close them entirely when trying to see and work with my images.
Wouldn't it be great if we could simply minimize one or more of the tool windows to the bottom of the application screen? Then the tools remain INSIDE the current dimensions of the app, and can be restored to normal size with a keystroke or a click. Shouldn't be too hard to implement.
My draworder tool bar buttons and pull down commands are not working. I click on them and get
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
This is the same issue for all of the draworder commands.
If I type draworder in the commande line I can get it to work. How do I restore my tool bar commands to get them to work?
Sometimes when I start up Photoshop CS6, I discover that all my preferences have reverted to defaults.
View 5 Replies View RelatedI've been noticing that my preferences for Photoshop (and InDesign too) occassionally revert back to their defaults on their own (rulers default back to pixels or picas, workspace defaults back to the original state and so forth). It was mildly annoying, but does anyone know why this is happening? Has anyone else experienced this? Not the most earth-shattering of problems but obviously not normal...(makes you wonder if something more serious may be lurking behind the scenes).
I know to change rulers permanently you need to do it with all documents closed, so that's not it (I'm sure that would be everyone's first piece of advice).
Particulars: CS2, Windows XP (I'd like to blame Windows!), doesn't appear to be any pattern to when it occurs other than it happens on a relaunch of the program, not in mid-stream while you're working. More interesting, I see it happening on 3 different systems (which makes me think it's something with Adobe or Windows, not my flukey PC )
I have edited a picture using MS Paint. Its a mistake actually, i accidentally CUT a portion off ( the portion becomes white space ) and save it.
When i view the picture in Photoshop, Picasa, or any other image viewer, the white space is there. However, when i see my picture in thumbnail mode in My Pictures folder, the original image is there ( the thumbnail is unedited ). Question is, anybody can advice me how can i get the original picture back? Is there any way i could go around?
I'm trying to create a pretty simple "starfield" by using noise and then playing with the Levels. When I go to adjust the levels, everything looks good in the preview. However, when I click "ok" the image reverts back to what it looked like before, with maybe a VERY slight change, but nowhere close to what my preview had shown originally. I'm not sure what could be causing this, but it does the same thing whether I try levels, brightness/contrast, and threshhold.
View 1 Replies View RelatedIn the past I have almost always used Nikon's Capture NX2 as my RAW editor. In that, it's immediately obvious how to get back to the original NEF camera image, or even choose to go back to different stages in the editing history.
There seems no obvious way to do this in ACR. For example I made a mistake in a RAW edit, but when I reopened the RAW image again from Bridge I got the edited version with the unwanted error., I would like ACR to do what Nikon Capture can do.
I have also just found that, when trying to assign a keyword to this file in Bridge, I got got an "...error writing metadata" message. All the other NEF files in that folder (none of which have yet been edited in ACR) accepted the keywords with no problems.
Since writing the above, I have found that this "error writing metadata" is a common issue for which there seems no solution - it extends back to earlier versions of Bridge (I have CS6 64-bit with vety latest updates).
Ever since I downloaded the latest 13.0.1 update to CS6 two days ago, my custom settings keep resetting to every time I close down and reopen the program. Even my custom brushes keep disappearing and require reloading. This is getting maddening! Why is it happening and what can I do to fix it?
View 2 Replies View RelatedI want to edit on a certain layer, for example layer 1: My current layer happens to be layer 2, so: I click on layer 1 to make it current. I do the editing & it isn't quite what I want, so I undo theaction. As I undo the action, CS6 also undoes my layer change (i.e makes tolayer 2 current again) even though I want layer 1 to remain the current one. Is there any way to change this in edit preferences or somewhere?
View 6 Replies View RelatedI've been using photoshop CS6 since it came out of beta, and I've been happy with 99% of the interface changes, except for some of the the new tool cursors which now have arrows in the upper left corner. I've been meaning to post this a while ago, but it seemed that the forums were offline.
One example is the crop tool, but what mainly hinders me are the lassos and paint bucket cursor icons. Is there any way I can replace those with the original ones from cs5 and prior?
When you pick up a tool, and it has an icon of an object (i.e. a lasso), your instinct is to look at and use the tip of that object, not some little black arrow in a corner.
For example, you wouldn't want to have an arrow next to your text cursor, or next to your magic wand cursor, would you? You'd want to use the tip of the wand.
I'm not sure what part of the user community suggested these little arrows be added on those tools, but I find it to be a bad design idea. And it's an annoying choice imo, beacause it doesn't make sense from an interaction design point of view, and not because it would be hard for me to get wrid of my habit of using the tip of the lasso, and to get used to the arrow instead. It's bad, because now, there are two conflicting pointers in the same tool: the icon tip and the arrow tip.
[EDIT] I'm sure people will say that they prefer the new design, arguing about "design consistency" and whatnot. So this is why I ask if there's a way for me to replace the cursors in my photoshop, not everyone's.
I am trying to rename a folder, after I type in the new name it reverts back to the old name.
View 1 Replies View RelatedHow do I exclude a selected area within a photo from reacting to the fill tool(paint bucket)?
View 3 Replies View RelatedI use my photo camera for photo's and video, but as PSE is crashing/freezes when it encounters a mts file I would like to exclude these from importing but the default "media type" settings does not allow this.How can I force PSE to exclude these files, so I can import all photos into the organizer.
View 2 Replies View RelatedI have upgraded from pse9 to 11 and after selecting a photo in organiser then viewing in full screen and enlarging to 100% then exiting, organiser loses the highlight and reverts to the first photo. This also occurs when the photo is edited and saved you have to find where the editedd photo has gone to, it is time consuming when you have a large number of photos in the organiser. pse9 did not do this.Also pse11 does not sort photos properly by the shot date especially when the photos ard edited
View 1 Replies View Relatedmy problem is when i open cad 2012, the cursor keep become big.. i already try revert to default and it back to normal but when i close the program,cursor will revert again become big and hard to do draft.
My spec :
Acer aspire 4736z laptop
windows 7 64bit
4gb ddr2 ram
intel GMA 4500m graphic with latest driver
I have a body object from Inventor. I need to create a rendering showing the inside of the unit. I created a spline, and extruded it as my "cutting object". When I try Boolean or ProBoolean, it doesn't look right.
ProBoolean makes it disappear and Boolean creates gaps in the geometry.
I would attempt to re-model this in MAX but it is far beyond my abilities right now.
Deanbody_object_boolean_help.zip
Max 2014 (SP2)
Win 7 64-bit; Dual Xeon E5-2687W @ 3.10 GHz; 64 GB Ram
NVIDIA GeForce GTX 570; Quadro 4000
I have a relatively flat shape with many curves on the edges. I am trying to intersect a plane with all the curved edges and do a Boolean intersection. It worked with a less complex shape but this one has over 19000 objects. Any size limit on Boolean operations?
View 2 Replies View RelatedI am trying to use the Boolean modifier more than one time on a box and it doesn't seem to work. I pick the Operand B to subtract on the second object I want to Boolean out, it disappears, but there is no hole there.
View 8 Replies View RelatedI would like to reversing a Boolean operation if an error happens.
I have two solids that when I try to perform a Subtract Boolean Operation gives me an error. When the error happens I lose both solids. I would like to be able to reverse the subtraction in an event of an error so that I still have both solids.
Dim Solid_1 as Solid3d = CreateSoldFromPl(plinePoints1)
Dim Solid_2 as Solid3d = CreateSoldFromPl(plinePoints1)Try
Solid_1.BooleanOperation(BooleanOperationType.BoolSubtract, Solid_2)
End Try
One of our employees is having an issue where his project file keeps reverting back to a default setup and his changes are being lost. Is there anyway to prevent this from happening?
View 2 Replies View RelatedWe have a problem whereby our Templates revert back to a Default state. This is totally random.
One operator can create a drawing with the correct template loading up, and seconds later another operator will report that an old 'Inventor' default template has loaded up. On investigation it appears all templates marked as "standard" revert back to older versions.
I have made the Templates read only, but the problem still persists.
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
Has seen Inventor randomly reset a users project file from whatever it's set at to Default?
I have a couple of users here that for whatever reason have a habit of closing out Inventor everytime they want to close out one file and open another...yes, if they work on 10 files in one day, they've opened and closed Inventor 10 times...i.e. open, close, open, close, etc.
I've seen the project file reset happen on thier stations only thusfar.
Inventor 2010
i have a little layering system i set up. in my drawing, in modelspace (or on any of my sheets), there's a little drop-down box that saves 'unsaved layer state'. if i click on it, i can find my 'personal layer state', select it, and all my layers pop up. but then if i switch tabs for a second, it goes right back to 'unsaved layer state'. how do i keep this on my own personal one?!
View 1 Replies View RelatedDoes the IV2012 API allow the creation of a Yes/No parameter. I have created "Text" parameters but I am stumped on this one.
View 5 Replies View RelatedLooking for sample VBA code to get all referenced documents from an assembly and add a boolean user parameter to each (parts and sub assemblies). I have been trying to modify peices of code I have found on this forum and Mod the Machine, but have had no luck so far.
There may also be standard content center parts in the assembly as well that I would like to somehow identify so I can skip over them.
I created a cone where I wanted to cut some cylindrical hole in it so I created the cylinders and did a boolean subtraction of the cylinders from the cone.
I got the holes cut out, but the resulting object appears as though it's hollow. Is this something do do with my display or is there a setting I'm missing to create objects as hollow/solid?