Photoshop :: Reverting Image
Jun 24, 2006
I have edited a picture using MS Paint. Its a mistake actually, i accidentally CUT a portion off ( the portion becomes white space ) and save it.
When i view the picture in Photoshop, Picasa, or any other image viewer, the white space is there. However, when i see my picture in thumbnail mode in My Pictures folder, the original image is there ( the thumbnail is unedited ). Question is, anybody can advice me how can i get the original picture back? Is there any way i could go around?
View 1 Replies
ADVERTISEMENT
Sep 22, 2013
I'm trying to create a pretty simple "starfield" by using noise and then playing with the Levels. When I go to adjust the levels, everything looks good in the preview. However, when I click "ok" the image reverts back to what it looked like before, with maybe a VERY slight change, but nowhere close to what my preview had shown originally. I'm not sure what could be causing this, but it does the same thing whether I try levels, brightness/contrast, and threshhold.
View 1 Replies
View Related
Nov 5, 2012
In the past I have almost always used Nikon's Capture NX2 as my RAW editor. In that, it's immediately obvious how to get back to the original NEF camera image, or even choose to go back to different stages in the editing history.
There seems no obvious way to do this in ACR. For example I made a mistake in a RAW edit, but when I reopened the RAW image again from Bridge I got the edited version with the unwanted error., I would like ACR to do what Nikon Capture can do.
I have also just found that, when trying to assign a keyword to this file in Bridge, I got got an "...error writing metadata" message. All the other NEF files in that folder (none of which have yet been edited in ACR) accepted the keywords with no problems.
Since writing the above, I have found that this "error writing metadata" is a common issue for which there seems no solution - it extends back to earlier versions of Bridge (I have CS6 64-bit with vety latest updates).
View 4 Replies
View Related
Sep 20, 2013
Sometimes when I start up Photoshop CS6, I discover that all my preferences have reverted to defaults.
View 5 Replies
View Related
Sep 20, 2006
I've been noticing that my preferences for Photoshop (and InDesign too) occassionally revert back to their defaults on their own (rulers default back to pixels or picas, workspace defaults back to the original state and so forth). It was mildly annoying, but does anyone know why this is happening? Has anyone else experienced this? Not the most earth-shattering of problems but obviously not normal...(makes you wonder if something more serious may be lurking behind the scenes).
I know to change rulers permanently you need to do it with all documents closed, so that's not it (I'm sure that would be everyone's first piece of advice).
Particulars: CS2, Windows XP (I'd like to blame Windows!), doesn't appear to be any pattern to when it occurs other than it happens on a relaunch of the program, not in mid-stream while you're working. More interesting, I see it happening on 3 different systems (which makes me think it's something with Adobe or Windows, not my flukey PC )
View 2 Replies
View Related
Sep 1, 2012
Ever since I downloaded the latest 13.0.1 update to CS6 two days ago, my custom settings keep resetting to every time I close down and reopen the program. Even my custom brushes keep disappearing and require reloading. This is getting maddening! Why is it happening and what can I do to fix it?
View 2 Replies
View Related
Aug 7, 2013
I want to edit on a certain layer, for example layer 1: My current layer happens to be layer 2, so: I click on layer 1 to make it current. I do the editing & it isn't quite what I want, so I undo theaction. As I undo the action, CS6 also undoes my layer change (i.e makes tolayer 2 current again) even though I want layer 1 to remain the current one. Is there any way to change this in edit preferences or somewhere?
View 6 Replies
View Related
May 11, 2012
I found what I think is a bug in Photoshop CS6. The Pen tool keeps reverting back to the "Exclude" boolean mode every time you select the Pen tool. In previous versions of Photoshop, the boolean mode stayed at whatever mode it was set at when no paths were selected.
View 17 Replies
View Related
Aug 12, 2012
I've been using photoshop CS6 since it came out of beta, and I've been happy with 99% of the interface changes, except for some of the the new tool cursors which now have arrows in the upper left corner. I've been meaning to post this a while ago, but it seemed that the forums were offline.
One example is the crop tool, but what mainly hinders me are the lassos and paint bucket cursor icons. Is there any way I can replace those with the original ones from cs5 and prior?
When you pick up a tool, and it has an icon of an object (i.e. a lasso), your instinct is to look at and use the tip of that object, not some little black arrow in a corner.
For example, you wouldn't want to have an arrow next to your text cursor, or next to your magic wand cursor, would you? You'd want to use the tip of the wand.
I'm not sure what part of the user community suggested these little arrows be added on those tools, but I find it to be a bad design idea. And it's an annoying choice imo, beacause it doesn't make sense from an interaction design point of view, and not because it would be hard for me to get wrid of my habit of using the tip of the lasso, and to get used to the arrow instead. It's bad, because now, there are two conflicting pointers in the same tool: the icon tip and the arrow tip.
[EDIT] I'm sure people will say that they prefer the new design, arguing about "design consistency" and whatnot. So this is why I ask if there's a way for me to replace the cursors in my photoshop, not everyone's.
View 18 Replies
View Related
Oct 12, 2013
I am trying to rename a folder, after I type in the new name it reverts back to the old name.
View 1 Replies
View Related
Jun 25, 2013
I have upgraded from pse9 to 11 and after selecting a photo in organiser then viewing in full screen and enlarging to 100% then exiting, organiser loses the highlight and reverts to the first photo. This also occurs when the photo is edited and saved you have to find where the editedd photo has gone to, it is time consuming when you have a large number of photos in the organiser. pse9 did not do this.Also pse11 does not sort photos properly by the shot date especially when the photos ard edited
View 1 Replies
View Related
Nov 27, 2012
my problem is when i open cad 2012, the cursor keep become big.. i already try revert to default and it back to normal but when i close the program,cursor will revert again become big and hard to do draft.
My spec :
Acer aspire 4736z laptop
windows 7 64bit
4gb ddr2 ram
intel GMA 4500m graphic with latest driver
View 3 Replies
View Related
Jun 28, 2013
One of our employees is having an issue where his project file keeps reverting back to a default setup and his changes are being lost. Is there anyway to prevent this from happening?
View 2 Replies
View Related
Aug 5, 2013
We have a problem whereby our Templates revert back to a Default state. This is totally random.
One operator can create a drawing with the correct template loading up, and seconds later another operator will report that an old 'Inventor' default template has loaded up. On investigation it appears all templates marked as "standard" revert back to older versions.
I have made the Templates read only, but the problem still persists.
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
View 7 Replies
View Related
Sep 22, 2009
Has seen Inventor randomly reset a users project file from whatever it's set at to Default?
I have a couple of users here that for whatever reason have a habit of closing out Inventor everytime they want to close out one file and open another...yes, if they work on 10 files in one day, they've opened and closed Inventor 10 times...i.e. open, close, open, close, etc.
I've seen the project file reset happen on thier stations only thusfar.
Inventor 2010
View 9 Replies
View Related
Apr 6, 2013
i have a little layering system i set up. in my drawing, in modelspace (or on any of my sheets), there's a little drop-down box that saves 'unsaved layer state'. if i click on it, i can find my 'personal layer state', select it, and all my layers pop up. but then if i switch tabs for a second, it goes right back to 'unsaved layer state'. how do i keep this on my own personal one?!
View 1 Replies
View Related
Jan 28, 2014
I create a column graph, I set my column styles, modify the text and other attributes to how I want them to look but if I change the data the whole graph keeps reverting back to the basic chart. Is there anyway to stop this because its really irritating when I need to create a set of 20 graphs.
View 2 Replies
View Related
Oct 24, 2012
When drawing 'strokes' in CS6 with brush, the `Fill` color will keep reverting back to 'None' no matter what I previously set it to. I'd like both fill and stroke color to retain their values as I previously set it, but it appears that fill color will retain value only if I draw shapes that do have a fill. It seems as though illustrator responds to the fact that I am drawing strokes only by redefining the fill value to be 'none'.
View 25 Replies
View Related
Mar 17, 2013
The Time Configuration dialogue isn't remembering when I set 'Custom' to 30. If I close and reopen the dialogue after setting 'Custom' to 30, it reverts to NTSC. If I set it to 3 or 4, for example, it sticks. Why is setting it to 30 reverting to NTSC when NTSC is NOT 30 fps?
View 2 Replies
View Related
Dec 11, 2007
I am trying to create some images in PS2 that have to be 3.5 to 4.0 mb. When viewing the Image Size screen, I might see an image size of 9.6 mb. However, when I save the image and run my mouse over the image in Bridge, it shows a size between 2 to 3 mb. I can't figure out why this discrepancy, or what math I need to do in order to figure out how to create the required image size other than by trial and error.
View 1 Replies
View Related
Jun 20, 2013
I have cs5.1 and when I convert an image to cmyk and save to tiff the saved image grays-out.
View 2 Replies
View Related
Nov 13, 2012
I'm trying to combine a monotone image onto a grayscale image to use in my Indesign file. The whole job has to print two colors.
How can I easily make the diaper a PMS color and add it to the grayscale baby and still maintain two colors (PMS + K)
Right now, I'm cheating and combining the PMS diaper onto the grayscale baby in Indesign..... but I really need to have this in Photoshop so I can add shadows to make it more convincing. I tried converting the grayscale to CMYK and deleting all channels but black, didn't work as it took away all the information from the image.
See image below.
(using CS5)
View 1 Replies
View Related
Sep 12, 2013
The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies
View Related
Jun 4, 2013
I am trying to find a faster way to save my images. I shoot in raw, save raw images as jpegs after editing them in Camera Raw. I am using Photoshop CS6 on a Mac version 10.7.5. When I save, I either have to save as a copy of the exisiting image, or replace the image I'm working on. Other forums I've read said to make an action to save and create a function key to make this process faster, but my function keys aren't working, and playing the action I've created still makes a copy of the image.
View 3 Replies
View Related
Jul 19, 2012
I have an action in which it will place an image onto an image like a watermark, when i place the image, it is not center by center so i drag it or use keyboard arrows to center and then press enter, then i saw its on the center, but when i save it, the saved image is not on the center, how was that?
you can see that the right side of border it is not centered because the left side border is thicker than right side, here is the part of the action
you can see that i move the image after i place it because its not on the center so adjusting it makes it at the center but the Translate part is not equal.
View 18 Replies
View Related
Jun 14, 2012
I would love to be able to export my image from 3d spherical panorama back to the complete Image. Raster image clips the image. Photoshop 3D is great for retouching the nadir (bottom) a spherical panorama image.
View 2 Replies
View Related
Nov 8, 2013
All the JPEG images I have converted from cr2 are grainy. I am converting them by Image Processor.
View 1 Replies
View Related
Jun 11, 2013
How to change the view in CS6 so that it is as sharp as my email program?
View 20 Replies
View Related
Apr 19, 2013
When I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies
View Related
Feb 22, 2006
Is there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies
View Related
Aug 7, 2013
I am trying to take a handprint such as the one below and change the color of the handprint to say a light pink (or any color) but I want to keep most of the detail of the fine lines that make this handprint unique. The lines could even just come out as white as below. The main thing is to change the overall color while maintaining the fine details. I have been trying to accomplish this for over a week now in Photoshop Elements 11 and I have been unsuccessful as anything I do just totally color fills the image, which does not keep any details of the handprint.
View 15 Replies
View Related
