Illustrator :: Fill Color Keeps Reverting To None When Drawing Strokes With Brush
Oct 24, 2012
When drawing 'strokes' in CS6 with brush, the `Fill` color will keep reverting back to 'None' no matter what I previously set it to. I'd like both fill and stroke color to retain their values as I previously set it, but it appears that fill color will retain value only if I draw shapes that do have a fill. It seems as though illustrator responds to the fact that I am drawing strokes only by redefining the fill value to be 'none'.
View 25 Replies
ADVERTISEMENT
Feb 8, 2012
I recently upgraded my computer to Windows 7 (32 bit) and installed CS5 on it. Everything seems to be fine, but using my wacom intuos 3 tablet i found that when making curved brush strokes every so often it came out as a straight line, the straight line being where i start and finish the curve (see pic below. The S stroke is what should happen. The straight line is what happens every so often with the same motion).
At first i thought it was the tablet and reinstalled the drivers to no effect. Since then i've discovered that the same thing occurs with the mouse. The problem occurs once every five or so strokes (i'm doing digital art, so there's a lot of strokes). It never happens if i do a stroke slowly, but will almost always happen if i do a fast stroke.
Testing other painting programs i've found them all to be fine (i grabbed trials of open Canvas, Sai and Gimp and had no such issues). However, getting out my old copy of CS2, i found it had the same problem. The problem does appear to be Photoshop + my computer based. I've since reinstalled them both but had no success there either. (My computer is a intel i3 btw with 8gb of ram, so i wouldn't believe it to be a performance issue)
View 5 Replies
View Related
Feb 27, 2013
I want to paint texture into an image without adding or changing color.
The best way to explain my goal is to visit this website with very fine work by Mark Wainer.
[URL]....
My own website is [URL]...
He has used Buzz, as have I, to change photos into watercolor like images, now defunct and taken over by Topaz software, who now market Simplify in place of BUZZ.
After running the filter, he has added brush strokes to add texture without altering any color—just adding a texture looking like impasto or thick brush strokes.
I have searched everywhere and view lots of video but cannot find a technique to get the result I want.
I am sure there is way to do this, probably with brushes in CS6 and unable to find or create a way to achieve this effect.
View 1 Replies
View Related
Aug 8, 2012
I have button drawing for web in Adobe Illustrator format. I'm trying to get fill settings to create the same look with CSS. I can't find what color to use and gradient settings.
View 1 Replies
View Related
May 27, 2013
I have no problem dividing objects using the "divide" tool in the Pathfinder palette, but I was wondering if there was a way to divide brush strokes?
For example, let's say you wanted to paint three brush strokes right next to each other, but not overlapping. Is there a way to select all three strokes and then divide them so no one stroke resides over another, they would be completely separate of each other.
View 11 Replies
View Related
Jul 30, 2013
I am using a charcaol brush on a stroke in CS6 and when I pick a gradient it just turns the color completely black. The gradient works if I make the stroke basic though. I am guessing it is not possible for whatever reason? I also tried to recolor the artwork but couldnt find any gradient options in there.
I suppose a workaround would to maybe make a duplicate of the stroke, make it a basic shape and blend the 2 or something?
View 3 Replies
View Related
Aug 26, 2012
got an out of the blue commission for a t-shirt .... now I'm getting a crash course in Illusrator. Been using it all of one day.
Here's the trouble though - when I use my brushes to make actual brush strokes, the resulting paths look "grainy" - like they aren't vectors/paths.
From what I understand, even drawing freehand with the brush should produce vectored lines - and I can play with points within those freehand brush strokes. But when I zoom out, the strokes I drew with the brush look almost "pixelly", while the ones done with the pen tool look nice and smooth (I should note this is a custom brush that I made, butt the other paths that I've applied the brush to look fine).
Is this normal? Should I resign myself to having to go back over everything using the pen tool (there's a lot of fine, irregular line work)? Or is there some setting of the brush or special key that I'm missing?I know it's small, but you might be able to see what I mean where the main vertical line meets up with the angled line. The near-vertical is brushed in, the angled one is a path with brush overlay....
View 14 Replies
View Related
Jan 2, 2014
There is one elementary thing about Illustrator CS6 that I don’t understand. Do the following:
-Select Pencil Tool. Make three strokes at random and select them.
-Apply a brush to them, for instance a Calligraphic Brush 5 pt. Oval.
-Deselect the strokes.
-Doubleclick the same brush on the Brushes Panel in order to edit it.
-Choose Preview to see changes.
-Change the brush size to 20 point. The three strokes will change in size, as they are supposed to.
-Click OK. A warning dialog box appears. Click Apply To Strokes.
Now what happens? THE CHANGES DO NOT APPLY TO THE STROKES. They turn back from 20 to 5 pt. Why? Try, on the other hand, to make the entire procedure without selecting Preview. Now the process runs perfectly; the change to 20 pt. is applied to the strokes. My question is: why does Preview spoil the process?
View 8 Replies
View Related
Apr 8, 2013
I've encountered a problem which is a first for me with Ai CS4, and that is I'm working on a cat illustration but I'm drawing hairs using a brush I've made that have anywhere from 4-5 strokes with multiple colors to mimic the look of hair. Everything was working fine until I used the hand tool to move the artboard around and the image pixelated a bit. Zooming in/out takes a bit of time as well, and then drawing any further strokes from a fresh boot now that I've saved my progress seem to be cached, then appear slowly one at a time afterwards.
I've got a Macbook Pro with 2.4ghz i5 cpu, 4gb ram, running osx 10.7.5. I'm wondering if I'm pushing the limits of the intel integrated graphics card. I have a Mac Pro at home with 8gb of ram although I learned recently that Ai CS4 only utilises 2gb of ram max. Regardless, my tower at home has a dedicated graphics card, ATI I believe.
System monitor reads 346mb free, 920mb wired, 2.03 active, 750mb inactive, used 3.66gb.
Trying to narrow it down to being operator error IE: too complex for Illustrator, or possibly the laptop hardware. I'd love to get back to work on this project of mine
Consequently the artboard size is 11.49in x 14.92in
View 2 Replies
View Related
Jul 12, 2012
How do i turn brush strokes into a solid object, and retain the tapering effects? Im using CS3 on Mac OSX
View 1 Replies
View Related
Aug 22, 2013
I'm trying to put some black hair brush strokes against a head and they will NOT turn black no matter what I do. I have checked the color tab to make sure it's set in RBG.
View 11 Replies
View Related
Jan 29, 2013
I need this function for adjusting scatter brush but I cannot find any.
View 5 Replies
View Related
Aug 5, 2011
Is there a smoothing setting for brushes? When I draw certain shapes with sharper corners (like squares) illustrator rounds them out very excessively. I know there has to be a certain amount of smoothing to convert a stroke made by the user into a vector, but is there a way to reduce the amount. Interestingly, if I draw the shape really fast, I get the desired result, however if I draw slowly, it rounds it tremendously. I would think it would be the other way around because with a slower stroke you are giving more input points and therefore more precision but this is obviously not the case. Basically, I want to achieve brush strokes that more accurately represent my input. T
View 3 Replies
View Related
Aug 5, 2013
I'm using the bristle brush to create some organic highlighting on my objects. Since the file gets too large & unmanageable, I tried thinking of other ways to reduce it down to just one gradient mesh object. I've seen suggestions of converting the bristle brush strokes to Raster, but I need this to be scaleable.
I've attached an image that shows an example of the bristle brushed object (painted inside an object), the outline view and the crazy Expanded view. How to combine this into one gradient mesh object?
View 6 Replies
View Related
Feb 17, 2013
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
View 4 Replies
View Related
Feb 13, 2013
Is there any way to add a favorite brush stroke to the list of brush strokes, or do you always have to open the original file to access the brush stroke?
View 9 Replies
View Related
Mar 5, 2013
I am going to trace some shape and need it have in dashed strokes and differently colored. When I want to use color options for strokes it doesnt work. How to color it?
View 3 Replies
View Related
Mar 28, 2013
How come the width tool can ne used on a path made by pen tool but not brush strokes? Is a brush stroke not a path??
View 4 Replies
View Related
Jan 6, 2013
I have a question regarding illustrator. Let's say I have a circle with blue fill and red stroke. And I place an image in the illustrator file. Now I want to change the red stroke of my circle to let's say a purple color by sampling the color from the image.
How can I achieve that with a eye dropper tool? Every time when I try to sample a color from the image, the whole circle will change to purple instead of just the stroke? I have tried multiple key combination, shift, alt, ctrl but they all don't work.
View 7 Replies
View Related
Nov 14, 2012
I have a file with two squares with red and blue fill colors respectively and transparent surrounding strokes. I'm trying to find a way to automatically set the stroke color of each square to the respective fill color. Is there an Illustrator script somewhere that would achieve that? I am not aware of an internal Illustrator command for this purpose.
View 8 Replies
View Related
Feb 16, 2014
I am using CS5.5, and I was watching a video of someone using CS6 inking a sketch with a calligraphic brush that has black stroke and white fill. I am trying to do the same thing, but every time I select the fill color and start using the brush it goes back to "none" as the fill option. Is this a CS6 exclusive feature?
View 1 Replies
View Related
Oct 11, 2012
a)) I have a simple drawing attached with color outlines.How do i fill in the shapes with color.The blue outline filled in Blue and the red outline filled in Red
b)) How do i set the drawing space so as it fits to a A4 size paper?
View 2 Replies
View Related
Jun 14, 2012
I was getting brush lag for a few days after installing CS6. every 4 or so normal brush strokes, the brush would start to lag. And after a few lagging strokes it would go back to normal and then repeat itself.
The first thing I did was delete the work spaces that I never use (I doubt that fixed the problem).
Second thing I did was turn the cache levels to 1 and set image previews to "never save" (found this tip online, didn't fix the lag problem but I still kept those settings anyway).
The third thing (and what I believe fixed the problem) was going to "performance" in Photoshop, clicking on the advanced settings for your graphics processor and turning the drawing mode from advanced to basic.
I never had to do this on cs4 which is why it took a few days of tinkering around to fix the problem.
View 7 Replies
View Related
Nov 7, 2013
I recently tried the trial version of photoshop CS6, and the lines I draw in photoshop are more like series of little straight lines. I can draw better lines in Paint Tool SAI with no stabilizer, but no matter what I do in photoshop the resulting lines are finicky.
My (really not that good at all) PC
i3-550 processor
4 GB DDR3 RAM
Intel HD Graphics (no workstation card for me, unfortunately)
500 GB HDD
Windows 7 64-bit Home Premium
View 4 Replies
View Related
Nov 19, 2013
Lightroom is the ability to partially 'subtract' brush strokes using the ALT key, rather than deleting the entire brush stroke and starting all over again. Is it possible to do the same thing in Photoshop? If so, how?
View 2 Replies
View Related
Apr 21, 2004
I am working on a paint pallet and need to add brush strokes. I want to give the effect that some one whiped the brush through the paint and then dabd it on the pallet. Make sence? I hope so.
I am not done yet, I actually just started, but I couldn't figure out how to go about the brush strokes so I figured I would ask.
View 8 Replies
View Related
Jan 7, 2009
I need to use a brush to create Japanese style brush strokes - like Japanese calligraphy as exemplified in the link below....
View 14 Replies
View Related
Feb 14, 2007
Any ideas on how to duplicate the brush strokes in this collage that seem to integrate the background color with the individual pictures, making for a wonderful transition between background and pictures? I have tried it many ways without complete success. Attachment 17051
View 3 Replies
View Related
Aug 29, 2013
Used to be possible to create a brush stroke that faded out over its length. You could choose the number of steps it took to fade and by trial, create a brush that faded the way you want.
Can't find anything in any documentation.
View 2 Replies
View Related
Oct 2, 2012
Essentially when I draw a line in any drawing program, I am unable to produce clean smooth lines. I primarily use photoshop. All lines that are created have a jitteryness to them. I've uploaded two pictures one featuring when I have the issue and the other where I do not have the issue. It happens randomly and different things seem to fix it.
There are times where re downloading the driver works or sometimes making a backup of the driver and doing a restore works as well. There are even times where simply restarting the program that I'm using will fix the issue, but it always seems to come back no matter what.
At one point thought that maybe my video card drivers were all out of date but that's not the case. Originally the issue was happening on my tablet pc, so I thought that it was only related to that computer but then noted that it also was happening on my desktop as well when using my intuos!
View 4 Replies
View Related
Feb 11, 2013
I read that I needed to change to 8 bit, and I did and I still can't use the brush strokes filter. Is there anything I can do about this?
View 4 Replies
View Related
