Photoshop :: How To Import Image At Original Size
Apr 21, 2013
This is a huge problem for me, and it's getting incredibly annoying.
This issue is when I import an image (drag and drop, or other ways as well) into Photoshop and the image appears in a really small size. I need to be extremely percise in all of my projects by the pixel, I can't have it going a single pixel larger or smaller. But when I drag it in, it shows up much smaller and I have to drag the boundries to make it larger. I basically just want to drag a 64x96 image in, and have it actually show up as 64x96, not incredibly smaller.
I don't know the size of a portion on the canvas, because I can't just guess, so it's impossible to actually stretch it to its original size and actually be accurate.
View 4 Replies
ADVERTISEMENT
Nov 21, 2012
There are times when I want to re-import an image but am not allowed to do so even when I un-check "do not allow duplicate imports"
View 8 Replies
View Related
Nov 4, 2012
When transforming I am unable to increase size from original .image is stretched outside box but parts of image is outwith original size and is unseen.
View 3 Replies
View Related
Jun 10, 2012
When I import images (by dragging image into document), these often start off at a scaled size and with fractional dimensions, e.g. width 117.84px.
Is there a way to import images at their original dimensions?
View 1 Replies
View Related
Jan 13, 2014
When you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies
View Related
Feb 19, 2013
I drag the graphed box to scale an image down (or up) and after clicking "scale" the image size decreases but the original box is there (original size). Why?
View 5 Replies
View Related
Jun 15, 2011
I wanted to combine two images one needs to be fit to the scale of the background image. So basically I followed the instructions.
Open up your background layer which was 800x600 landscape photo.
Then I imported my other image which was 600x800 portrait photo too. Layers -Import from file. I resized it then copied into a new layer. That was fine.
The problem is as soon as the new image is imported, the background image changes so that it only takes up half of the canvas. So now I've got a white area for half of the canvas. I can't seem to change this.
View 2 Replies
View Related
Sep 25, 2013
Bristle brushes have an option near their size sliders named "restore to original size" ... but for some brushes, this option is resetting brushes to another size other than the original size appearing on the brush swacthes.
View 1 Replies
View Related
Aug 7, 2012
I've just reduced the size of a canvas from 300x300 to 200x200 but when I merge the layers I'm left with a dotted line showing the original size.
reduced canvas size.tiff (128.61K)
Number of downloads: 3
View 3 Replies
View Related
Dec 6, 2013
My picture’s original size was 108.2 MB in tiff. After I developed my photo in Lightroom and exported the new image, the file decrease to 50MB in tiff. Why did Lightroom decrease the file size to more than half the original size? Is there a way to increase the exportation file size to that I may develop a large size print?
View 7 Replies
View Related
Aug 11, 2011
When I import images (using Xara Designer Pro v7.1) I do I the images to arrive at their actual image size (in pixels)?
e.g. I just created an image which is 788x 953, however when I import it (using File ==> Import etc...) it arrives at 500x376!
View 9 Replies
View Related
Mar 20, 2013
Import .svg file into gimp.. Image size 1024x1024 and smaller produces aliasing.
View 7 Replies
View Related
Oct 11, 2012
Some of my files I open in CS6 open really tiny.....like 0.044% or the original size. Is ther a setting I can change to have then open larger.....
View 3 Replies
View Related
Jul 31, 2012
I got a picture of 4kb, and used Photoshop(cs4) to paint white all,so it changed to white rectangle, then saved it. that's for web site logos, so it must keep the picture size same as original (ex, 70px * 50px).
The problem I have was, the saved picture(with png, jpeg, gif, or any format) has a size of over 40k bite. How to make the file size at most the original size, i.e. 4kb by using Photoshop, if it is possible.
View 3 Replies
View Related
Aug 3, 2006
I'm using Photoshop Esentials 3.0.
I have a photo of a negative from a 35 mm camera. File "A". It's a jpg file.
I need a picture of two of these negatives side by side.
I opened file "A" and used the marque to highlight the picture and copy it to the clip board.
Then I closed the file and opened a new file "B" and made the demensions of the new file "B" the same height, but I doubled the width.
Everything copied and pasted ok and I mergered down all the layers and saved it as a jpg. file.
Here is the problem.
The new file that I created, File "B" with the two pictures side by side is only about half of the height of the original file.
I've tried everything that I know but I just can't increase the height of the new file "B" I created with the two pictures side by side.
View 4 Replies
View Related
Jun 5, 2012
How to export from Photoshop original filters and import them into Paint.NET?
View 5 Replies
View Related
Aug 29, 2007
For a poster design I have a smart object that has been warped and transformed in delightful ways so it looks like it's on the cover of an old warped book. I had to change the smart object to siut my "client" (I'm doing it as a favour) and now it doesn't look right.
QUESION: how do I return this transformed and warped smart object back to its original pixels, so that it looks just like it does when I edit the smart object separately.
View 4 Replies
View Related
Oct 3, 2012
Attaching a JPG to an email, says its a larger size than the original?
View 2 Replies
View Related
Feb 27, 2012
I loaded Photoshop 10 and then imported/moved my catalogs from Photoshop 6. They are all scrambled - do not honor import dates/sequence and have dates and file names all intermingled. It is really a screwed up mess. I haven't found a way to unscrew it! - Or tell me I get to live with it!
View 5 Replies
View Related
Mar 4, 2013
This may have a simple solution (and probably does), but I can't find it. What I'm trying to do is to import an AI file into AE 5.5 as original vectors. I need to be able to scale up to about 12,000 percent and then back down to 100 percent for the effect of an extreme closeup being zoomed out. The point of vectors, of course, is that you can do this without losing resolution... but no matter what I try, AI files keep being imported as raster files. When they're scaled up enough, the pixilation starts. There HAS to be a way around this!!!
View 6 Replies
View Related
Sep 5, 2012
How can I get my gimp windows to return to their original size - they are very large and remain that way? Shrink wrap only only holds while working on the image, then large again.
View 1 Replies
View Related
Nov 2, 2013
How do I export photos and keep their original size. I do not have the Image Sizing checked but it seems to be resizing my photos anyway. It seems to have started this evening. I exported files fine at file sizes of ex: 5387 kb the original size. Not they are exporting at ex: 478 kb.
View 4 Replies
View Related
Jul 19, 2011
I have PDF map created with latest PDF Creator. Originally it was made with GIS software Geo Media Professional (v6). Document looks good while previewing with Reader. When importing to Photoshop CS5 - looks good to (but raster). But when I'm trying to import it to CorelDrawX5 strange things happens:
Import takes a lot of time After hitting [Enter] file (group name.pdf) origin is about 5000mm;6400mm (width 45720mm, height 45720mm) - so it is definitely far from any page and much much bigger than original - in this case original was 2500mm width and 1067mm height landscape prepared to print on HP DesignJet 800PS 42'' roll hitting F4 - max range warning appears. I was trying to move group somewhere in visible work area using X,Y - strange results - negative position appears after hitting Enter
In CorelDRAW X4 I didn't get such "feature". There is no additional font embedded in document (ARIAL, HELVETICA).
View 6 Replies
View Related
Jul 9, 2011
I joined two video clips and saved them as a single clip. They are both .mov files. One is 18mb and the other is 15mb, so I assumed the new file would be 33mb. When I save the new file in .mpg, however, it is only 27mb. When I try saving it in .mov, it balloons to over 120mb. How should I save the new clip to maintain the original size and ensure I'm not losing any quality?
Also, when I save the clips it seems to be converting the original 640*480 aspect ratio to 720*480. How do I preserve the original aspect ratio?
View 8 Replies
View Related
Jan 30, 2012
Why Corel Draw does not preserve original JPG size defined ie. in Photoshop.
Instead I think Corel Draw looks at the DPI and then maybe opens it as native monitor dpi I don't know but I spend ages to make JPG to size in PS to them make layout in CorelDraw and it was all wasted because I need to resize them back in CorelDraw.Graphic Designer, Web designer and playing with Video and Audio mixing and editing as well ;-).Working for Large Format Printing company Carrick Signs.
View 2 Replies
View Related
Nov 15, 2012
[ Bug ] Exporting to .GIF does not keep its original sizeThe checkbox 'Maintain Size' checked.
Result: importing that .GIF is 5 time size bigger.
View 2 Replies
View Related
May 17, 2012
LR 3.6 has serious limitations causing what should be an easy task hours to trouble shoot. Exporting original size JPEG images to DVD should be a no brainer but the application was not built to handle MS OS 7 64bit. Choice is to upgrade to LR v 4 but will it work?
View 4 Replies
View Related
Jan 11, 2013
I am travelling to the UK and wish to export my photograph collection as a catalogue to my laptop (without the original photos) and work on organising them, deleting unwanted photos, etc and then reimport the catalogue on my return. My question is this - if I delete a photo whilst on my laptop, on reimport into my main computer will lightroom then go and delete this photograph from my original collection as I hope it will do?
View 2 Replies
View Related
Jul 24, 2012
I just finished a logo design in corel draw x5.The design was made on a a4 dimensions.I copy the elements to paste them into a much smaller canvas but the image when minimized is pixelated not vectored as the original.
How can I paste the image and the image is as the original (vectored)?
View 8 Replies
View Related
May 1, 2012
Recently upgraded from X3 to X6. Just discovered there is no place on the property bar to change the size by entering a percent of original size. It was located next to the actual size in inches.
I did Ctrl-J and tried to find it in the customization, but came up empty. Surely this feature still exists?
View 5 Replies
View Related
Dec 14, 2013
How come the file size when I export from Lightroom is substantially smaller than the original file size? My original image file was 6MB, but when exported from zlightroom the file size for that file is only 2MB. I want to export full size files so that they can be published or enlarged.
View 7 Replies
View Related
