When I import images (by dragging image into document), these often start off at a scaled size and with fractional dimensions, e.g. width 117.84px.
Is there a way to import images at their original dimensions?
When printing, does the printer follows the bleed dimensions or my original dimension?
So if it follows the bleed dimension, (For example.) I want my name card to be 85mm x 45mm with 3mm bleed, my inital dimension (when being created) have to be 79mm x 39mm (due to minusing off 6mm on both sides)? Am I right to say that?
There are times when I want to re-import an image but am not allowed to do so even when I un-check "do not allow duplicate imports"
View 8 Replies View RelatedThis is a huge problem for me, and it's getting incredibly annoying.
This issue is when I import an image (drag and drop, or other ways as well) into Photoshop and the image appears in a really small size. I need to be extremely percise in all of my projects by the pixel, I can't have it going a single pixel larger or smaller. But when I drag it in, it shows up much smaller and I have to drag the boundries to make it larger. I basically just want to drag a 64x96 image in, and have it actually show up as 64x96, not incredibly smaller.
I don't know the size of a portion on the canvas, because I can't just guess, so it's impossible to actually stretch it to its original size and actually be accurate.
Any tips on how to extract an embedded bitmap at its original pre-embedded resolution from an AI file?
View 8 Replies View RelatedI'm trying to upload a .svg file to a t shirt printing site. The image is to be printed on a sleeve therefore the dimentions need to be small (5 inch x 5 inch when uploaded). Every time I upload the file, it is returning information that the file is too big : 1261 px x 1323 px, 10.5 inch x 11.0 inch.
When I try to reduce the image size in Illustrator, the dimensions are still the same when I upload it?!?!? It is quite a complex design.
Using Illustrator CS3
I have a 900x900 px image, and a 900x900 px artboard.
When I place the image on the artboard, the image is 675.094x675.094 px
How can I place the image at its native size?
Windows 7 | CS5
I have an image received from a client in .eps format. I need to get it into either a .gif or .jpg format AND the final file MUST be .8 inches x .3 inces, AND no more than 10K in size. How can I save it with these dimensions/constraints and not lose resolution? What I have tried - export to .jpg (file is 5 inches x 3 inches), export and change resolution to 100ppi (image is nearly the right dimensions, but blurry). The tools I have are AI and PS both version CS5
View 10 Replies View RelatedMy radius and diameter dimensions keep jumping from my original line to another, see attached
View 1 Replies View RelatedThis may have a simple solution (and probably does), but I can't find it. What I'm trying to do is to import an AI file into AE 5.5 as original vectors. I need to be able to scale up to about 12,000 percent and then back down to 100 percent for the effect of an extreme closeup being zoomed out. The point of vectors, of course, is that you can do this without losing resolution... but no matter what I try, AI files keep being imported as raster files. When they're scaled up enough, the pixilation starts. There HAS to be a way around this!!!
View 6 Replies View RelatedI'm working on pdf image files, 300 dpi, and I want to use the Image Trace tool to vectorized these ones. The result has to be under 4 colors, and the file is a mozaic of photos calibrated 3mm x 3mm.
The purpose is to vectorize the whole image ( composed with approximately 800 photos )I did different tests with the settings of the Image Trace tool with samples of 12 x 12 mm ( 4 photos x 4 photos ) and the result is correct. But when I try to do the same with the entire image, the result is just horrible The entire image is sized 200 mm height and 130 mm width, but the import format is exactly the same than the samlpes I made my presets on.
I was thinking that Illustrator should act the same with the full image than with the small one, it just took more time to calculate the rendering, but apparently not.
I have PDF map created with latest PDF Creator. Originally it was made with GIS software Geo Media Professional (v6). Document looks good while previewing with Reader. When importing to Photoshop CS5 - looks good to (but raster). But when I'm trying to import it to CorelDrawX5 strange things happens:
Import takes a lot of time After hitting [Enter] file (group name.pdf) origin is about 5000mm;6400mm (width 45720mm, height 45720mm) - so it is definitely far from any page and much much bigger than original - in this case original was 2500mm width and 1067mm height landscape prepared to print on HP DesignJet 800PS 42'' roll hitting F4 - max range warning appears. I was trying to move group somewhere in visible work area using X,Y - strange results - negative position appears after hitting Enter
In CorelDRAW X4 I didn't get such "feature". There is no additional font embedded in document (ARIAL, HELVETICA).
How to export from Photoshop original filters and import them into Paint.NET?
View 5 Replies View RelatedVersion:1.0 StartHTML:0000000105 EndHTML:0000004414 StartFragment:0000002524 EndFragment:0000004378
What I bring to the software is my background in studio arts 2D and 3D. Photography is a tool to support both of these activities. Over the years that skill has developed and I have many great photos. The photos make me a little nuts now that I focus on digital. In digitals photos I easily have over 60,000 photos. I have some experience with Photoshop. I won’t say I am a proficient but will say I have good skills in it. I created my first logo in Photoshop. Of course it is not vector and I know it should be vector. I did it at no charge for a nonprofit. I would still like to create a vector form of the logo. Awhile back I purchased a book titled “Illustrator CS5 on demand”. It breaks it down in a way that Illustrator is less intimidating. It has renewed my interest in Illustrator. How do I more effectively merge all of these tools and skills? How do I bring what I know to Illustrator’s table? I know there are great possibilities here if I can learn to build vector graphics.
I'm having trouble importing images in Illustrator CS6. Dragging from finder doesn't work, nor does the "place" option. When opening an image in illustrator, all i get is a blank document.
View 2 Replies View RelatedI have a small problem: I have several images which I need to import / combine with an hole pattern. Then I just need the outlines of the holes (each color) for laser cutting. Doing by hand and coloring each dot is difficult, how to make this in some few steps ?
View 2 Replies View RelatedI am travelling to the UK and wish to export my photograph collection as a catalogue to my laptop (without the original photos) and work on organising them, deleting unwanted photos, etc and then reimport the catalogue on my return. My question is this - if I delete a photo whilst on my laptop, on reimport into my main computer will lightroom then go and delete this photograph from my original collection as I hope it will do?
View 2 Replies View RelatedI just finished a logo design in corel draw x5.The design was made on a a4 dimensions.I copy the elements to paste them into a much smaller canvas but the image when minimized is pixelated not vectored as the original.
How can I paste the image and the image is as the original (vectored)?
I'm very new to Civil 3D.I've been given original topography in a .dwg file and a .csv file of the same topography after some dirt work.My problem is when I import the .csv file the points don't overlay the original topography.
What I have done is added the .csv points to the original topography .dwg with the "Points From File" option.
Running a script to open up files and convert to another type. When it gets to a TIFF type file a dialog window titled 'TIFF Import Options' is opening. This windows has an Options column that contains two radio selections for 'Convert Layers to Objects' and 'Flatten Layers to a Single Image'. How would I open the file with the 'flatten layers to a single image' set?
View 1 Replies View RelatedI loaded Photoshop 10 and then imported/moved my catalogs from Photoshop 6. They are all scrambled - do not honor import dates/sequence and have dates and file names all intermingled. It is really a screwed up mess. I haven't found a way to unscrew it! - Or tell me I get to live with it!
View 5 Replies View RelatedImage Sizing Dimensions produces wrong image sizes upon export for certain images.
Example, I have export set up for iPad resolution, 2048x1536px at 264ppi. If I now export an 3264x4928px image it should be resized to 1356x2048px. What I get is 1356x2047 instead, one pixel too short on the long side. This doesn't happen for all images source resolutions and ratios though. I haven't figured out the pattern yet.
How to import Inventor file 2D(.idw) to autocad 2D (model space) with dimensions, axes, sections, ... ?
Inventor 2013 & Autocad Mechanical 2013
In the past I have almost always used Nikon's Capture NX2 as my RAW editor. In that, it's immediately obvious how to get back to the original NEF camera image, or even choose to go back to different stages in the editing history.
There seems no obvious way to do this in ACR. For example I made a mistake in a RAW edit, but when I reopened the RAW image again from Bridge I got the edited version with the unwanted error., I would like ACR to do what Nikon Capture can do.
I have also just found that, when trying to assign a keyword to this file in Bridge, I got got an "...error writing metadata" message. All the other NEF files in that folder (none of which have yet been edited in ACR) accepted the keywords with no problems.
Since writing the above, I have found that this "error writing metadata" is a common issue for which there seems no solution - it extends back to earlier versions of Bridge (I have CS6 64-bit with vety latest updates).
In CS3 I would duplicate an image in order to soft-proof before printing. By going from full to partial screen I could then identify both original and duplicates and could pull them into adjacent positions. In CS6 that doesn't work How do I separate my two images and place them next to each other?
View 2 Replies View RelatedDoes anyone know how I can crop an image, but keep the original proportions of the image? Is there a way to crop and manually set the crop size?
View 3 Replies View RelatedI love taking landscape photos and i am interested in turning them into black and white images. No problem with that bit, i then want to make the black and white more intense, i realise this will be difficult with the black but i want the white to be, i don't know slightly more silver i suppose, more haunting......am i making sense, lol.
I would also like to keep some color from the original image, maybe have a tree with just a faint coloring from the original or a stream with just a hint of the original blue.
I don't know how to transfer the original color to the black and white copy, is it done with a mask?.
I am trying to match the color.
The original is the manufacturer's, #1.
Shot at 2007-11-06
My photo is the yellowish, this is my original photographed image, #2.
Shot at 2007-11-06
The third is my closest attempt to color correct: (Color Balance: Midtones- Red +10, Green +40, Blue +72, Shadows- Cyan -5, Green +8, Blue +13, Highlights- Cyan -4, Green +5, Blue +12), #3.
Let's say I have a picture with an ugly translucent overlay, like this:
If I have a copy of the overlay that isn't transparent (or is transparent, but doesn't have anything behind it), is there a way I could use that to remove it from the original image? One application of this would be removing UIs from video game screenshots.
I opened an image, scaled it, changed the canvas size and pasted another image into it. When I move new image below the original image (where the gray checker board is located) the new image disappears.
I finally closed everything and started over. Same results.
Now what?
If I have a picture with a transparent overlay, along with a nontransparent version of the overlay, is there a way I can remove the overlay from the original image?
One application for this would be removing GUIs from video game screenshots.