way of adding colour to a black and white picture? I have the original in colour, but I want to change it to black and white and then put a bit of the original colour back into a couple of places...
View 2 RepliesI print to a Canon Colour Image Runner printer. The default colour setting is set to mono.
I've noticed when I open a colour image in Coreldraw, navigate to Print Setup, change the job settings to Colour, then print, it still comes out mono, or sometimes come out as a random combination of both mono and colour.
I've found this to be caused the setting called 'Output colour bitmaps as'. This appears to set itself to match the default printer settings on the host pc. Ie my printer is set to Mono by default, hence the above setting sets itself to Grayscale to match. If i choose to print my Coreldraw document in colour, the above mentioned setting remains set to Grayscale, hence the printed output is for bitmaps is grayscale, not colour as i selected.
Likewise if i change my printer defaults to colour, the 'Output colour bitmaps as' setting changes itself to RGB, and then there is no problem.
I assume this is a bug, as if one of my users chooses to print a document in colour, then it should come out in colour. It shouldn't be necessary to change *another* setting to achieve this.
I've got a bitmap image and I forgot to save the psd...
Anyway, on the bitmap is a certain colour which I got by changing the opacity of the original layer which had this colour.
Now, I want to get the original colour - before the opacity change. Is there a way I can calculate this? I really need the precise colour.
I remeber at one time I was able to convert a color image into black & white by reassing Control, Shift, U. Then there was another command that would allow be to add teh original colors back in where I wanted them, giving me a color and black & white image. I just cannot remeber how I did the second step.
View 2 Replies View RelatedI am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedCreating a collage. Just placed a new object with a layer mask. Now I need to create a hue/saturation, levels adjustment layer and color balance adjustment layer all with masks. Ok, no problem, but when I do this, my original picture turns black and white.
View 3 Replies View RelatedI use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
Basically just want to make the middle separating line in the following image:
Identical to (same degree of horizontal fadeout into transparency):
I have spent hours on it trying to edit the original layer below the alpha transparency or adding layers, getting nowhere.
How to add color to transparency background?
View 13 Replies View RelatedI'm new to Animate and just having a play making an animated Christmas card. Problem is all the symbols look fine if you go into each one in isolation, but when you are on the stage everything looks as though it's about a 50% tint of what it should be.
Animation plays as I want, just a lot paler that it should be. I've tried adding a strong colour above all my layers and the same thing happens...
For no apparent reason I can no longer add ratings/picks/colour labels to my pictures through either shortcuts or the menu. The only way I can add ratings is by clicking on the ratings dots when I have the grid extras turned on.
View 2 Replies View RelatedI captured video that is mono, and want to make it stereo? VS5 . I tried splitting the audio and trying to place it in another track which didn't work the closest I can get is to set it on 5.1 channel. But it doesn't quite sound correct in the right speaker.
View 2 Replies View RelatedMy mic I'm using to record is a mono (single channel) and I find that no matter what I do in VSPX5, the audio to my video stays in mono. I've tried saving an audio file of the clip as mono or stereo. I've tried saving the video using different compressions as well. Still, the audio only comes out of one speaker.
View 1 Replies View RelatedI am having problems with LR5.2RC rendering a substantial number of my .dng files in monochrome. There appears to be no logic to this, and files appear in colour in Finder. I am using an iMac with Mountain Lion.
View 12 Replies View RelatedI just finished a logo design in corel draw x5.The design was made on a a4 dimensions.I copy the elements to paste them into a much smaller canvas but the image when minimized is pixelated not vectored as the original.
How can I paste the image and the image is as the original (vectored)?
In the past I have almost always used Nikon's Capture NX2 as my RAW editor. In that, it's immediately obvious how to get back to the original NEF camera image, or even choose to go back to different stages in the editing history.
There seems no obvious way to do this in ACR. For example I made a mistake in a RAW edit, but when I reopened the RAW image again from Bridge I got the edited version with the unwanted error., I would like ACR to do what Nikon Capture can do.
I have also just found that, when trying to assign a keyword to this file in Bridge, I got got an "...error writing metadata" message. All the other NEF files in that folder (none of which have yet been edited in ACR) accepted the keywords with no problems.
Since writing the above, I have found that this "error writing metadata" is a common issue for which there seems no solution - it extends back to earlier versions of Bridge (I have CS6 64-bit with vety latest updates).
This is a huge problem for me, and it's getting incredibly annoying.
This issue is when I import an image (drag and drop, or other ways as well) into Photoshop and the image appears in a really small size. I need to be extremely percise in all of my projects by the pixel, I can't have it going a single pixel larger or smaller. But when I drag it in, it shows up much smaller and I have to drag the boundries to make it larger. I basically just want to drag a 64x96 image in, and have it actually show up as 64x96, not incredibly smaller.
I don't know the size of a portion on the canvas, because I can't just guess, so it's impossible to actually stretch it to its original size and actually be accurate.
In CS3 I would duplicate an image in order to soft-proof before printing. By going from full to partial screen I could then identify both original and duplicates and could pull them into adjacent positions. In CS6 that doesn't work How do I separate my two images and place them next to each other?
View 2 Replies View RelatedDoes anyone know how I can crop an image, but keep the original proportions of the image? Is there a way to crop and manually set the crop size?
View 3 Replies View RelatedI love taking landscape photos and i am interested in turning them into black and white images. No problem with that bit, i then want to make the black and white more intense, i realise this will be difficult with the black but i want the white to be, i don't know slightly more silver i suppose, more haunting......am i making sense, lol.
I would also like to keep some color from the original image, maybe have a tree with just a faint coloring from the original or a stream with just a hint of the original blue.
I don't know how to transfer the original color to the black and white copy, is it done with a mask?.
I am trying to match the color.
The original is the manufacturer's, #1.
Shot at 2007-11-06
My photo is the yellowish, this is my original photographed image, #2.
Shot at 2007-11-06
The third is my closest attempt to color correct: (Color Balance: Midtones- Red +10, Green +40, Blue +72, Shadows- Cyan -5, Green +8, Blue +13, Highlights- Cyan -4, Green +5, Blue +12), #3.
I have seen a number people new to smoke get confused when trying to edit mono audio source to a stereo track only to find the audio doesn't doesn't appear.
How about a preference that automatically splits the mono audio so that it edits to the stereo track?
If it was on by default it would definitely be of less confusion to new users
Or perhaps a dialogue box explaining why the edit did not work due to the differing audio properties.
Great work with getting smoke to where it is!
Illustrator cs6 - I have used image trace to create a 3 colour image of a photograph. Is there a way to create layers based on the three colours? (One layer for each of the three colours)
View 2 Replies View RelatedIf I select Edit Content on a Smart Object layer, and then select Duplicate Layer, will that put two copies of the original image in the file?
I used the Place command to bring high resolution images into a canvas of a much lower resolution. I've already spent a lot of time scaling and positioning the images on the canvas. But it turns out, I would now like to do certain editing on the original pixels of the images because of their greater resolution. Of course, that defeats the purpose of Smart Objects for non-destructive editing.
But there's no reason I can't keep two copies of an original image in a file, and destructively edit only one copy, right?
I have a image i want to convert orginal image to sharp lineart how can i do photoshop CS3.
View 8 Replies View RelatedI'm using version 5.5 in Windows 2000. I am confused because all other images in other programs etc appear normal whereas in photoshop 5.5 they have a greenish tinge. I corrected this on the original image by choosing View > Preview > Uncompensated RGB. However, if I try colour adjustment etc e.g. variations, all the preview images still have the green tinge. Does anyone know how to correct this?
Also Uncompensated RGB is supposed to be the default view, but when I close PS the setting is lost and on opening, all images including the original are back to green. What am I missing? I have other versions 5.5 and CS on other pcs with no problems.
I'm trying to save a file as web content (either jpg or gif) but when I save the file it is much darker than the original.
If I view the saved version of the file in PS there are no issues, but once I view it in a browser, the issue arises.
Is there a way to control this? I've never had this problem before while working with photographs or other files.
For the record I'm using PS 6.0 for PC and the browser I'm using is IE 5.5.
My video material holds two voices that were recorded on CH1 and CH2 in mono, resulting in a stereo clip that has one voice on the left channel and one voice on the right channel. So far I always duplicated the audio clips and use fill right and fill left. I just found out about channel mappings in CS2 and CS3, but for my actual project it is too late since it is cut already. It is my first project I'm doing in CS2 and after it is finished I will install CS3. So my first question is: When I use the channel mapping command, how are the resulting mono channels handled in the master? Will each mono channel fill the right AND the left channel of the stereo master track?
With delight I found out that the channel mixer in CS2 allows to use fill right and fill left effects, so I don't have to drag the effects on each clip separatley.
My second question is regarding the mixing of the two voices. Since we couldn't afford to have a professional sound engenieer at the shoot the channel of the voice that was not talking wasn't turned down, so the second voice will be heard on the other channel when the two people stood close together. Is there a more efficient way to mix the two voices instead of using rubber bands to bring down one voice when it is not talking? It's a hell lot of work.
I am editing .CR2 files using camera raw, and when I save the edited version as a .tiff, my changes are being applied to my original .CR2 as well. I am losing the original .CR2 files.
View 3 Replies View RelatedWhen you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies View Related