Photoshop :: Logo Needs A Outline File For Printing As Vinyl Sticker
May 31, 2012
I like to do some freelance Photoshop projects once in a while. Lasts months has been more . Now i made a logo for a restaurant which they want to print as a vinyl sticker for on their windows. I send this logo to the printing company, but they asked me for a seperate outline-file, because the sticker will be contoured cut around the logo. But in Photoshop i cannot seem to find a method to make a outline file.
View 9 Replies
ADVERTISEMENT
Sep 19, 2013
Our company logo exists as an outlined .eps file. Wouldn't I simply send the logo to the printer and have them resize it as needed? How do you set up a file with no height designation?
View 5 Replies
View Related
Jun 25, 2012
I am planning to get some photos printed on vinyl wallpaper. The physical dimensions of the wall paper will be 1300mm x 2500mm and as I am ordering it online, there is an upload restriction of 8MB (file formats allowed are .pdf .jpg and .zip).
I would like to collage multiple images to create my wallpaper and plan to resize and edit each image before collating them in one large image. Then I will resize that image to be the final one (if that makes sense).
What I want to know is, is there any simple way to work out what my final image's pixel width and height will need to be to fit the 8MB restriction? I have no idea what the printing dpi is, the website only indicates that images should be 'at least 4MB for good quality'...which means nothing.
Ideally I would like to work with a starting image with 4x or 16x the pixels so it resizes nicely...I just don't know where to start.
View 6 Replies
View Related
Oct 19, 2011
I'm trying to print on some special vinyl cling material. I tried saving my .psd graphics / text image to a jpg file so that I could more easily import it into MS Publisher.
When I printed it on the setting for 'Ultra Premium Glossy Photo Paper' which is what the manufacturer recommends, it looks like it should on the photo paper, but using the same settings printed to the vinyl cling material and my green (RGB: 76-116-53 / hex: 4c7435, CMYK: 72, 33, 100, 19) shifted to something more like (RGB: 142-155-80, CMYK: 48, 26, 84, 5; this is a guess as it is the hard copy print from an Epson Photo RS-380 ultra high resolution inkjet printer.
View 2 Replies
View Related
Oct 19, 2012
I have a sticker in PSCS6. I need to print 600 but each needs to have a number from 1000-1599. How can I do this without having to make 600 separate files?
View 2 Replies
View Related
Apr 30, 2012
I am using X5 and print on a Cannon wide format inkjet printer. I use RGB colors, but I'm having a problem printing on adhesive vinyl. I used R255 G0 B0 that I've used on other medias, but it came out a little orange. I really need a good red to use with my settings.
View 1 Replies
View Related
May 25, 2013
I have created a logo. I did it with black fill and white lines. This works well for a white background, like in print; but for the web the white needs to be transparent so the background colors show through and where lines cross you can see the background.
I have tried making the lines with out fill, but of course, that gives no defination of the small spaces that I want not to be black.
View 1 Replies
View Related
May 21, 2012
I am VERY new to Adobe Illustrator and I am trying to recreate my company logo so as to save it in a higher res file type.
See attached.
The font is Melanie BT Roman, but I cannot figure out how to create the shadow / outline effect.
View 3 Replies
View Related
Feb 15, 2014
I have the colored logo in vector but I need a crisp clean vector black and white outline.
View 4 Replies
View Related
Feb 9, 2009
I have finally finished my logo for my friends small business, and want to save the document to a disk for the printer. I am using photoshop cs2. Should I save the document as an eps file for the print shop? I am completely clueless as to how to save my logo to a disk for the printer, so I apologize if this is a completely stupid question. I would also like to save it for a black and white application.
View 4 Replies
View Related
Feb 19, 2008
I have created a logo however it is only 400x400 and I need it to be 2 feet by 2 feet. How do I make it so that I can enlarge the logo without having to completely recreate it?
View 5 Replies
View Related
Jul 13, 2011
Just moving from Draw 12 to X5 - nice improvements.I've had this problem in 12 and also in X5. Could be a print driver issue.
Simply, when I try to print text with an outline the entire page gets filled with the outline color. Outline on objects print fine.I'm printing on my Xerox DC242 with the pcl driver.
View 9 Replies
View Related
Sep 2, 2012
I'm trying to print out a bunch of stickers using Photoshop CS5 and a Brother MFC-265C printer. Problem is that sticker paper seems to be bad in quality/very thin thus the colors comes off very dull. how to maximize brilliant colors? I'm using CMYK colors.
View 2 Replies
View Related
Oct 10, 2012
I'm pretty familiar with preparing files for print in Illustrator and am currently using CS6. However, I'm not at all familiar with preparing files for printing on non-white fabrics (a black t-shirt in this case). I've had a hunt on Google but haven't yet found a simple answer to my question which is this:
The logo is red and black on a white background (shown below). How do I make sure that the white area prints as white and not "no ink" as would happen when printing on white stock?
There will be a small run initially, so will probably use a heat transfer method rather than screen printing at this point.
View 4 Replies
View Related
Sep 24, 2013
I have a 3 color logo: black, PMS 200U, and PMS 1955U. The logo was built in Illustrator and I have placed grayscale tiff ontop of it. The grayscale tiff is a stipple (dots) effect that I colorized to PMS 1955U in Illustrator, masked it out on top of the logo, and set it to multiply. Within Illustrator, the separations look good and it prints fine when printing directly out of illustrator.
The problem is when I export it to a PDF/x1a and try to print it, it doesn't print properly. Printing from acrobat, it only previews and prints the PMS 1955U stipple and black. The flat PMS 200U under the tiff doesn't print. I've tried bitmapping the photoshop file and making the stipple monochromatic and still doesn't seem to work when exporting to a PDF and printing.
Funny thing is, when I do the whole process for the CMYK logo (not PMS), it all prints out fine as a PDF/x1a.
How to get the logo to export and print properly?
View 5 Replies
View Related
Mar 16, 2011
I've used an A&D mat to create a polished plastic floor.Now I would like to apply a circle-shaped sticker onto the floor by using a tif, tga or png, but the only result I get is either the sticker (alpha masked -> cirlce shaped) and a totally black A&D mat (premultiplied alpha off) OR the sticker (not alpha masked -> circle shaped sticker and the rest of the white bckgr bmp) and a black A&D mat (premultiplied alpha on).
As shown this procedure works with the standard material but won't with an A&D mat.Or maybe provide an alternative method to apply alpha masked bmp onto A&D Materials?
View 5 Replies
View Related
May 30, 2013
I have an image that I worked on in CS6 Extended, and then I flattened the layers, and 'saved-as' a PDF file. Then I opened the pdf file and there's a magenta colored outline going around the entire border of the image.
Why is that? I can't remeber that happening anytime before now but I will say that I did mess around with the Reader tools and Nav bar settings not too long ago. Did i set something off that I shouldn't have?
I have the absolute latest version of PDF Reader, (updated on 5-26-13).
Windows 7 64 bit, 8gb Ram, i7-2600k 5.Ghz, ATI HD 7850PE, 700W PSU, etc, etc.
View 4 Replies
View Related
Apr 27, 2004
I have two psd files. One with my logo and another with my web page template. I want to add my logo to the web page template without having to recreate it. I have been able to add the layers of my logo to the web page template following some advice I have found on this site (using duplicate layers and selecting the web page file.), but the logo is too big.
I have chained the layers of my logo together but now I need to scale it down, move it, then add some layer effects such as inside beveling etc. How do I scale just the logo layers down so they will fit correctly with the rest of the page?
View 9 Replies
View Related
Oct 21, 2008
I am trying to make a mock up advertisement for my car. I want to show people what they're companies logo would look like as a vinyl wrap on my car. I have Cut out the painted body of my car with the lasso tool and wouldand have a graphics image and would like to get an exact cut out of the image to fit on my car. I still want the refelctions to show through so it looks glossy instead of matte. I was assuming if I lowered the opacity it would allow for the reflections to go through but then the red of the car shines through and I was having trouble recoloring the car black to match the graphics. Is there anyway to just add shine to the image I wanna use as the wrap?
View 9 Replies
View Related
Feb 28, 2012
I have a PSD file that has a logo in white against a black background. I know how to change the black background to another color but I do not know how to change the white logo to another color and maintain the existing fade effect. The outer edges of the white logo fade into the black background.
If I was to change the black background to a green background (#808A53) then I would like to know how to make the white logo fade into the then green background.
Ultimately I would like to make the white logo a red color (#7d110c) that fades into a green background (#808A53) but I do not know how to do this as I am a novice with Photoshop.
The PSD file I referred to is hosted here
[URL]........
View 12 Replies
View Related
Jan 17, 2008
I have created a white canvas around a photo, and now I would like to import my logo, which is in a pdf file and place it on the white canvas that surrounds the photo. I know this must be easy, but after hours of experimenting I have not succeeded.
View 2 Replies
View Related
Aug 3, 2008
I wanted to know how to achieve this effect:
You see the circle? I've seen it done before. Where you can make your design look worn out especially with the worn out vinyl circle. I remember getting a catalog from VEER once and some designer had done two sleeves like that.
View 1 Replies
View Related
Jul 13, 2005
Trying to vectorize my logo.
View 9 Replies
View Related
May 17, 2012
I usually have full icons for my files, but for some reason my Photoshop CS6 file icons keep getting turned into the white icons with a little "PS" logo inside. I am using Windows 7 Professional edition on a 64-Bit Desktop.
The icon shouls be a full icon similar to the following (I know this is an After Effects icon - but is just to show an example of what I meant by a full file icon).
View 6 Replies
View Related
Jul 15, 2008
I need to do a print job for a album(vinyl) cover, I don't have problem with the art work but I'm not too familair with print, I know I have to do CMYK colours, but what is bothering me is what size do I make a vinyl cover in? I can't find measurements online.
View 3 Replies
View Related
Jul 14, 2006
I've been shooting a lot of "alternative" stuff, much of which has included PVC and latex. Lighting it is tricky enough, but much of the items are wrinkled, and aren't amenable to being ironed--something about melting and causing a mess...
getting the smooth highlights back instead of the textures and wrinkles? I've used the smudge tool, which works OK---if the image is websized, but falls apart at print sizes. Cloning is always an option, but it's going to be a long and painful process.
One example:
Before
After
View 9 Replies
View Related
Sep 30, 2013
Why does my illustrator file open in outline mode? Why won't it allow me to switch the view mode to preview instead of outline? It is a larger file but my computer should be able to handle it. It recently froze on me and now I can't get it to preview when I open it.
View 5 Replies
View Related
Jul 13, 2013
I did it on the apple logo coverings. So make images on the sphere. Of course, I did it "Ctrl + T > Warp" Do not automatically lead? So simple action? URL...
View 1 Replies
View Related
Jan 2, 2013
Currently self teaching myself using 3D on a current project I'm working on. A cable stayed bridge having a span of 30 metres supported primarily by a single diagonal parabolic arch. The arch is square in section but rotated so it looks like a diamond along the arch length. To draw the arch I have drawn the arch sections at intervals along the centreline where it changes size in section 1.4, 1.2, 1.1 and 1.0m. I have then used the loft command to draw the arch using the drawn sections as the objects to loft through.
For the GA drawing I have a plan view and elevation. When printing the generated/ lofted lines are are pixelated and not very crisp or clear (not a solid line).
I have tried adjusting the visual style and shade plot, for each of the options and none of them are giving me a solid crisp outline for the generated arch. I have also had a little play using the visual styles manager but nothing seems to work and also tried maximum quality in the print options.
What do I need to do to print a solid crisp outline for the outline of the arch please, are you able to select the edges of the square and convert them to solid 2d/ 3d lines.
Arch Plots.pdf
View 2 Replies
View Related
Mar 29, 2013
I am taking an online coreldraw class involving the rendering of a baseball with two opposing three-point curves.
Where can I find the button for the tab labelled " Outline width" or "outline pen window".
View 2 Replies
View Related
Mar 6, 2012
when I use the shape tool and text tool I'm getting a red dotted outline instead of the usual black outline. If I draw a rectangle it's empty, instead of shaded in? How do I put things back to normal?
View 3 Replies
View Related
