I have created a logo. I did it with black fill and white lines. This works well for a white background, like in print; but for the web the white needs to be transparent so the background colors show through and where lines cross you can see the background.
I have tried making the lines with out fill, but of course, that gives no defination of the small spaces that I want not to be black.
I am VERY new to Adobe Illustrator and I am trying to recreate my company logo so as to save it in a higher res file type.
See attached.
The font is Melanie BT Roman, but I cannot figure out how to create the shadow / outline effect.
I have put together an ad for my small company but am having a problem after printing to a high-res pdf with there being a thin white border where the edge of the actual file (its a square) is. This placed file is a transparent PSD file. How I can eliminate it?
View 5 Replies View RelatedI have the colored logo in vector but I need a crisp clean vector black and white outline.
View 4 Replies View RelatedI have seen that there are several posts regarding "transparent backgrounds," but but they're difficult to follow.
I'm using AI within CS5.5 but new to it. I am importing/converting a JPG file to vector format. The image is a logo with a large black circle boundry and a white opaque background. The background elements inside the boundry circle are also opaque white, and I wish to leave that as is. The edges of the circle touch the boundries of the JPG file tangentially by about 100px or so on each side when the JPG is viewed at original size.
My objective is to make everything outside the boundry circle a "transparent" background. What would be the best/easiest way to do this within AI? Is there, for example, a tool that will draw a circle that I can expand to get on the edge of the black boundry circle, and then make everything outside it transparent?
I have a logo which I would like to use as a transparent .gif file on my wordpress site. I have saved it for web use on Illustrator, but when I uploaded it, there is a white outline on the transparent logo, and it is all pixelated.
[URL]
I have a self designed logo that looks great on a white background. Problem is when I put the logo over a picture the outside area of the "o" in natco shows behond the red square. I want the outside of the "o" to be flush with the red square so it looks good when I put it over a picture.
View 5 Replies View RelatedI am trying to overlay a logo on top of my titles. The logo is a circle and is in PNG format. When I use this logo in documents it is totally transparent with only the circle showing. However, when I try to use it in my video the circle has a white square around it, the white being the transparent area.
View 2 Replies View RelatedI like to do some freelance Photoshop projects once in a while. Lasts months has been more . Now i made a logo for a restaurant which they want to print as a vinyl sticker for on their windows. I send this logo to the printing company, but they asked me for a seperate outline-file, because the sticker will be contoured cut around the logo. But in Photoshop i cannot seem to find a method to make a outline file.
View 9 Replies View Relatedhow do I draw a transparent rectangle with a black outline?
In Fireworks, this is very easy. Just select the rectangle tool, set the fill color to transparent, and select black for the outline color.
How is this done in PS 7?
To explain this as easy as possible. I want to achieve the following.
Create a shape.Create a letter via a type layer.Creating a clipping mask of the type layer so it appears inside the shape.Make the text layer a transparent shape. So regardless of the background I put it on the letter will always appear as if it is a cut out of the shape.
I want to do all of the above while keeping the shape and the text layer vector objects. I do not know Adobe Illustrator, so this is my only route.
Okay. I don't know how many logo/watermarking videos I've watched but I still don't have what I want. I have a logo but I haven't had any luck getting it into transparent form.
Text is easy, but I want to have my logo beside the text. Any simple instructions. Most videos I've watched don't show how to combine an existing logo to text.
how I can turn a logo (in jpg/bmp/gif) on a black background into a logo on a transparent background.
The logo is is like an eye with a lot of detail.
how do you create a square with a transparent fill (it has to go around part of a photograph)? I am using DP7. I can create the square with no fill, but how to get a black outline around it (to show that it's a square).
View 7 Replies View RelatedI am newbie using Elements 10.
How do I draw a rectangle that only displays the stroke. That is, it has a transparent fill.
I'm designing a header logo for a website with Photoshop CS4 (Mac) but am struggling to understand how to get the background transparent.
In Photoshop I've designed the logo using multiple layers. Prior to saving I've disabled the background layers (used for testing purposes), thus leaving a transparent area behind the logo (shown as a checkerboard pattern). However, I don't understand what the next step is. I've tried "Save for web" as well as flattening it first, only to result in a white background. I suppose I don't need to flatten it then I've also messed around with the transparency and matte options in the "Save for web" window but to no avail (yes, I know that I need to save in either GIF or PNG though for the latter I don't know the difference between PNG 8 and 24 and which of the three formats I should go for).
As for "Matte"; is this the color in the image which should be made transparent? So that in my case with a logo containing white among several colors I should make the background something entirely different from the logo as a background layer and choose "Matte" for that? I've also experimented with that but to no avail.
I have tried to research this and i have tried to do it (with limited success), but any specific steps on how to get a rounded logo with a /transparent/ background? i sometimes get a rounded logo (and sometimes i get stuck) but I have only been able to get a white background and not a transparent one.
View 4 Replies View RelatedI have a logo which ia transparent (psd file) that has some black color and I want to place it in a poster which has also black background color. So, I need to change the background color of this logo.
View 1 Replies View RelatedI made a 3D roatating moving logo in photoshop via mothion in Photoshop, it has a transparent background as i deleted it. When i go to render video its in animation already. I save and render it in quicktime but when it plays back on quicktime it has a black background around the image. How do i save it to play just the logo with NOblack background. Ive tried everything i know but NO joy.
View 7 Replies View RelatedI have tried 10 times now and all I am trying to do is remove a white background to a logo and export so that the background is transparent. Every time I remove the background and export and open, it shows up with the white background again. I know this is simple and driving me nuts.
I'm using CS5.1
how to create a transparent logo and add it over a picture? I will also be adding this over a video..
View 1 Replies View RelatedMy logo was greated in Photoshop as a logo with text on a transparent layer. Saved as a jpg-file I tried to "import" this logo as a Lightroom-watermark. It sort of worked, but the transparent layer in PS now shows as a white background "covering" too much of the photo (see screenshot). I'm using PH CS6 and LR4.
View 3 Replies View Relatedhow to draw and big fat line - about 24 pt - with rounded ends, then give that line an outline of its own so I can change the 'fill ' - the original line colour - and get an outlined line?
And just for fun, I want the 'fill' to be semi-transparent!
I think there is an easy way of accomplishing this without having get into selecting the background or the logo?
View 2 Replies View RelatedI have created a logo for a client using Xara. I would like to be able to send then a transparent version of the file so that they can use the logo on different backgrounds. The problem is a white hairy edge surrounding each element of the logo.
I have tried saving to png, gif, and tiff but they all look the same.
I'm using Elements 6. Old school, I know.
I'm trying to add a .png logo with a transparent background to a photo, but it always shows up as a gray background. What am I doing wrong.
I created a .png file from our organization logo. I used the magic wand to select and "delete" the backgound, leaving it transparent. However, when placed on our web site, the logo edges have a slight line. What must I do to not have the lines (to make the background truly transparent)?
[URL]
I'm practicing using Coreldraw and made a logo with a transparent background. It's a combination of rectangles and text. I exported the logo as a png. Everything looks fine in corel, but when I upload it to the web the edges are very ragged on the rectangles and text. I tried it with and without converting to curves and the same thing happens.
View 11 Replies View RelatedI made a logo using elements. I have tried numerous ways to make it transparent but when I put it on my pictures there is a white square box that appears with it. I want my whole logo to be transparent. I have saved it png, png 24. And still nothing works. How to get this box to disappear. Just to make sure I wasn't doing something wrong I took a photo and made the background transparent and took the selection that was not and put it into a different photo and the white square edge was still around it.
View 15 Replies View RelatedI'm wanting to create transparent text over a picture with only the outline of the text showing. So basically, I need to only see the stroke of the text and have be picture show thru from behind.
View 9 Replies View RelatedI was asked to cut out the background from a logo to make it transparent so the logo would look nice on a variety of backgrounds. I've been given a good quality jpeg file.
What I did was I selected (by colour) the background (white), inverted the selection, copied it and pasted as a new image.
It's all fine (the logo itself doesn't have any other elements) but there's still some whiteish/greyish outline around certain elements of the logo.
If I were to do it manually, it'd probably take ages. What would be the best way to accomplish it?