Photoshop :: Changing Color Of PSD File Of A Logo
Feb 28, 2012
I have a PSD file that has a logo in white against a black background. I know how to change the black background to another color but I do not know how to change the white logo to another color and maintain the existing fade effect. The outer edges of the white logo fade into the black background.
If I was to change the black background to a green background (#808A53) then I would like to know how to make the white logo fade into the then green background.
Ultimately I would like to make the white logo a red color (#7d110c) that fades into a green background (#808A53) but I do not know how to do this as I am a novice with Photoshop.
The PSD file I referred to is hosted here
[URL]........
View 12 Replies
ADVERTISEMENT
Aug 20, 2004
I've got a logo in jpg format. Right now it's black on white. I'd like to change the white background to the color of my web page (grey) and then take the black "logo" and change it to white.
I've tried this using the fill function and it doesn't look very good.
I'd like it to look like I had the layered file and just "filled" the logo part with white.
View 2 Replies
View Related
Sep 29, 2013
I am attempting to change the color of my logo. New to photoshop.
View 2 Replies
View Related
May 17, 2012
I usually have full icons for my files, but for some reason my Photoshop CS6 file icons keep getting turned into the white icons with a little "PS" logo inside. I am using Windows 7 Professional edition on a 64-Bit Desktop.
The icon shouls be a full icon similar to the following (I know this is an After Effects icon - but is just to show an example of what I meant by a full file icon).
View 6 Replies
View Related
Mar 12, 2014
How do I convert a 2-color jpg logo to a vector file?
View 2 Replies
View Related
Jun 10, 2011
In Photoshop you can take a design, change the hue and make a total blue image a red one.
See the image below. This is an AI file. So what I want to do is just change it from any color I want like you can do in Photoshop. Is this possible?
View 6 Replies
View Related
Jul 23, 2013
I have the following DDS file:
[URL]
I need to change that blue piece into dark green and the red into light green. Highlighting the section would be the obvious part, but when I paintbrush over it, it looks cartoonish. How can I keep it looking professional like that, whilst changing the color?
View 2 Replies
View Related
Nov 10, 2011
I've opened a gif file (web icon) which has shades of green. I want to use this on another site of ours which is similar but has shades of orange.
I use the dropper to select the color from a gif on the orange site - so the color is there in the color section box.
When I try to draw / fill on the green gif it ignores the orange color selected and uses a green from green gif. A lighter orange gives a lighter green.
View 2 Replies
View Related
Oct 16, 2006
re-creating the logo I've attached from scratch so I have more control over the design elements.
I want to remove the "black box" background, I need to change the color and size of the type, and I want to change the aspect ratio of the entire logo so that it stretches wider and is not quite as tall.?
I'm an intermediate PS user, but don't have much experience with type effects.? If someone would be willing to walk me through the process of recreating this, I would be very grateful!? (Note, I'm mostly talking about the text effect... I think I could handle the red line and possibly cloning the sun and flowers out,
View 6 Replies
View Related
Sep 28, 2013
I am having trouble in changing the color of the bullets without changing the text color. Problem is I cannot select/highlight just the bullet so any new color selected applies to the whole line including bullet and text. I am using DP v 7.
View 8 Replies
View Related
May 16, 2005
I've got a regular B&W logo that I'd like to add a little color to. I'm using photoshop CS and I've messed with the "Replace Color" feature but I can't get it to do anything. I would just select the black portion and then fill w/ my color but I'm getting jaggies etc...
View 5 Replies
View Related
Oct 23, 2012
How do I create the swatch set and I can't get the logo layers colored in?
Choose the Magic Wand tool , making sure "contiguous" is checked in the Options bar. Select the rectangle under "Monochromatic (Single Hue)". Press Alt+Backspace (Windows) or Option+Delete (Mac OS) to fill the selection with the foreground color.Â
#Open the Color Picker and select two values of your base color. Apply your color selections to the "Values" swatches.
Next, select two intensities, and apply to the "Intensities" swatches.
Now that you've got your color palette, combine the colors into a swatch set. Use the Rectangular Marquee tool to draw stripes and fill with the colors you've selected above. This is a space to experiment with how the colors look next to each other.
Ready for the fun part? Make a selection around the client logo using the Rectangular Marquee tool. The logo has been separated into layers to make color application easy. First, apply color to the "bg" layer. Sample a color swatch using the Eyedropper tool , then press Alt/Option-Backspace to fill with color.
Keeping the selection active, click the "top curves" layer. Sample a color with the Eyedropper tool, then press Alt / Option-Backspace. Move on to the "middle curves" layer. Select a color, and fill.
Next up, "bottom curves":
View 1 Replies
View Related
Sep 30, 2012
I used a web hex code to match up a color in a logo. (8700ff). However, now that i am in the process of designing its seems that my PS hex values are not the same as web hex values. Is there a setting that i need to get into to make these match?
Look at the words '' SILVER & HD CAMERAS '' as compared to the words '' The Buffalo Nickle ''. These both are set at a hex value of 8700ff. The color of "HD CAMERA" is correctly matching the site logo which was made in PS cs5. But the sites interpretation of that same Hex value is different.
View 10 Replies
View Related
Mar 8, 2005
I have a logo that I need to change the color on. Its currently black.
View 3 Replies
View Related
Aug 28, 2007
i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
View 3 Replies
View Related
Mar 4, 2012
How do I outline an image so I can change the background color without changing the image color ?
View 1 Replies
View Related
May 27, 2012
I'm trying to remove a white background from a logo image.
View 6 Replies
View Related
Apr 27, 2004
I have two psd files. One with my logo and another with my web page template. I want to add my logo to the web page template without having to recreate it. I have been able to add the layers of my logo to the web page template following some advice I have found on this site (using duplicate layers and selecting the web page file.), but the logo is too big.
I have chained the layers of my logo together but now I need to scale it down, move it, then add some layer effects such as inside beveling etc. How do I scale just the logo layers down so they will fit correctly with the rest of the page?
View 9 Replies
View Related
Jan 17, 2008
I have created a white canvas around a photo, and now I would like to import my logo, which is in a pdf file and place it on the white canvas that surrounds the photo. I know this must be easy, but after hours of experimenting I have not succeeded.
View 2 Replies
View Related
Dec 11, 2013
I am using the Color Exchange feature in Gimp 2. I am trying to change a red background to black. The Color Exchange feature allows me to do that, however, it comes out with only part of the color changed and it all very blotchy.
Here is a screenshot of what happens after I select the red square and do a Color Exchange from red to black.
View 2 Replies
View Related
Aug 28, 2012
How to turn a coloured logo into a in 1 colour, like edit>convert to greyscale but with a spot colour instead?
View 2 Replies
View Related
Feb 12, 2006
I'm making progress with my buttons thanks to everyone who replied on here....my next step is to incorporate an image into the buttons (as a branding method within my e-store).
I have an existing image which i wish to use in gif format, and was wondering whether i can convert it into a *.psd file. my main problem is that the background of the image is white, and as i want to use it in my buttons i really need to make it transparent?
View 3 Replies
View Related
Oct 16, 2013
I have attached my template drawing and a plotted pdf file of my template.
My question is the logos in the title block are hand drawn dwg logos. My client does not like the pdf file because the ITC logo text changes color and looks grainy or washed out. It is not crisp and clean. This is VERY IMPORTANT to him. Why do they change so as in the colors of the ITC logo change to a light blue not the 178 I set it at in AutoCad. when I plot a pdf the file. When plotting I use the DWG to PDF option.
View 7 Replies
View Related
Dec 5, 2012
I simply want to type the name of the website and change the first 2 letters to another color without having to do it in 2 separate words .
View 9 Replies
View Related
Oct 6, 2011
I scanned a logo that was designed with a pen. I've cleaned up most of the 'spots' from the paper, being not pure white.
Now, I would like to change the color. It was black, how do I change it to red or blue? I can't flood fill as you would imagine, because not every pixel has the same brightness.
View 4 Replies
View Related
Dec 8, 2012
I am currently tring to build a logo in illustrator. I would like to have it change color as it goes from the top to the bottom. An example of what I want is the logo on this African Tours website. I can get it to work in photoshop but I dont see the same tool in Illustrator. Otherwise is there a way that I can easily bring the file from Photoshop into Illustrator?
View 3 Replies
View Related
May 31, 2012
I like to do some freelance Photoshop projects once in a while. Lasts months has been more . Now i made a logo for a restaurant which they want to print as a vinyl sticker for on their windows. I send this logo to the printing company, but they asked me for a seperate outline-file, because the sticker will be contoured cut around the logo. But in Photoshop i cannot seem to find a method to make a outline file.
View 9 Replies
View Related
Jul 2, 2011
I take pictures of my fountain pens and mechanical pencils using a light box and a digital camera. Naturally, the backround is white. I would like to be able to change this white color to something else on occasion but don't know how to go about it in Photoshop. I am NOT a power user. I use Photoshop CS5 64 bit.
Keep in mind that sometimes there is also white in the pen in places and I do not want to change anything at all on the color of the pen.
View 4 Replies
View Related
Jan 12, 2006
I would like to change color an a car but I want all the reflections on it. Whenever I just paint it it doesn't look right right.
View 2 Replies
View Related
Aug 5, 2004
how do you change the color of a car in photoshop? i am having trouble doing it and would like some insigh on this matter.
View 4 Replies
View Related
Jun 25, 2005
to change many of the colors on these rugs to new colors she has provided me on a color sample sheet. The Magic Wand tool is not the answer as it gives a very rough selection and I need the kind of lines the polygonal Lasso Tool would make.
View 9 Replies
View Related
