I have the following DDS file:
[URL]
I need to change that blue piece into dark green and the red into light green. Highlighting the section would be the obvious part, but when I paintbrush over it, it looks cartoonish. How can I keep it looking professional like that, whilst changing the color?
I've opened a gif file (web icon) which has shades of green. I want to use this on another site of ours which is similar but has shades of orange.
I use the dropper to select the color from a gif on the orange site - so the color is there in the color section box.
When I try to draw / fill on the green gif it ignores the orange color selected and uses a green from green gif. A lighter orange gives a lighter green.
I am using the Color Exchange feature in Gimp 2. I am trying to change a red background to black. The Color Exchange feature allows me to do that, however, it comes out with only part of the color changed and it all very blotchy.
Here is a screenshot of what happens after I select the red square and do a Color Exchange from red to black.
I have an image and all I want to do is change it to a different color. So if the image is mostly red, I want to shade it blue but still keep its quality, meaning the light-red pixels will turn light-blue, and the dark-red pixels will turn dark-blue.
I prefer an option that automatically changes all the colors for the entire image, but if there is a shader tool where I have to manually shade the image, that'll work too.
I input the image, then I went to Image > Mode > RGB, and from there I went to Colors > Colorize and used the sliders to change the image to the color I want.
Attempting to add text in Gimp 2.8.2. I can do everything I need (size, font, etc) except I can not get the color to change. When I change color, the text does turn a light grey, but it doesn't change color.
Here is a quick video I made with Jing showing my problem. You can see in the video that font selection changes and sizes changes, though.
[URL]........
I'd like to change the picture here:
[URL].........
So that the fur of the animal looks purple/mauve (in particular the gray part, it would be best if the white part didn't change).
I haven't found a way to do this, even approximately (which would be enough), in a textured surface. Methods I've seen changing the hue saturation seem to work when working with primary colors, but I can't get it to work with a gray color.
Rocket.cdr
I have drawn a rocket and there's a white section in the flame that I'd prefer to be filled with Red. Orange and White don't make for a very convincing flame
How would I do this?
I am downloading semi-monochromatic picture files that I will be using for multiple applications. The image is originally semi-monochromatic with red and white being the only colors used. A complex image is created by adding more or less white to the red color. The image for each application I have in mind needs to be distinguished by the primary color of the image. I need to change this color first to green, then to orange, and so on. Is there a global command to change this one color?
I use the term semi-monochromatic because the pictures aren't actually black and white.
I can crop images, resize, and do a few other things but that is about the extent of my skills.
I am currently attempting to theme some images in an Android ROM but I'm not able to change the colors the way I want. Essentially I have a bunch of images with transparent backgrounds and white in the foreground. I simply want to swap out the white for another color (red, green, blue, whatever).
I have attached a sample image that I am working on. How on earth do I change the white to red (FF0000) for example? I tried using the select by color tool and clicking in the white area. Then I changed the foreground color to FF0000 and tried to paint into it. It doesn't seem to do anything but paint more white?
Some options were completely disabled for my image. For example, I went to Colors > Map and found that both Color Exchange and Rotate Colors are disabled. Why?
P.S. I have roughly 200 images that I need to perform this action on (and I may even do this with multiple colors -- create a blue set, a red set, etc.) so if there is some way to automate this process I would love to know. I'm a software developer and run Linux so I typically just write bash scripts for tedious tasks such as these. I know there is script-fu in gimp but I'm not familiar with it. Can I just call gimp within a bash loop and pass it some option to do this color change and save the new image for me?
That was one of my favorite effects in GIMP. Can do it just fine using Portable Gimp and 'use color from gradient'. But in GIMP 2.8.2 -- that's been taken away and we've been left with a confusing new Gradient system . Do NOT like it so far at all. Haven't figured out how to change the color of the sparks brush on it, let alone use it in any practical way.
Any way to be able to use this new version of the Gradient system and be able to change the color of the sparks brush?
[URL] ..... I have an image of a garage door on a white house. I need to generate a layer with a transparent background that when viewed over the original house turns the siding a different color say blue. The idea is that once I generate that layer I can then generate more layers like it to change the colors on the different parts of the house.
What would be the correct process in GIMP to accomplish this?
I want to create a simple thin glowing red bar. I want the red to fade into black, pretty much exactly like what the glowing hot tool does with yellow/white.
View 5 Replies View RelatedI am trying to produce a new logo for our business that has a solid Blue cloud image on a transparent background. I need to add text over this but ideally it will show as white over the cloud background but blue when its over the transparent background.
Cant simply change the color of text as its a curved edge its going over. I assume I will need to do some form of punch out but not sure how to start this.
How to change the color of an icon (ex: from black to grey). My problem is that the end result is sometimes an icon that is partially transparent.
Here is what I am doing:
1) I open the image of which I want to change the color (black icon over transparent background)
2) Create a new layer and color this in white.
3) Merge the two layers
4) Create a new layer and color this with the color I want for my icon
5) Go to Colors -> Color to Alpha
6) Select the current color of the icon
7) Click Ok - Now icon color is the wanted color over a white background
8) Create a new layer and leave this transparent
9) Go to Colors -> Color to Alpha
10) Select the white color (current background color).
11) Click Ok - Now icon background is transparent, but icon color is also partially transparent.
Is there a way how I can change the color of an icon without getting the icon color transparent.
Here is the image I am working with.
I want to change the color to hex #00aced (0, 172, 237). I tried the colorfy, but the image comes out purple. Another way that has worked for me in the past, with white images, is by clicking on the channel dialog and dragging the red down. Clicking on the eye, next delete the original image and than add a new foreground color based on what color I selected from the palette. Of course this isn't working either since the image is so dark.
Now in channel mixer it could work if the RGB would go higher than 200, but since my blue is 237 this is where I am stuck. It has worked with other colors, as long as the RGB is less than 200. This is by selecting each output individually, for example, starting with red and entering a value in red and leaving green and blue at 0. Next selecting Green, entering a value in green and leaving red and blue at 0, and so on... Is there some type of mathematical solution for using the channel mixer, or simple yet, is there a way of making my image more white, without losing my shadows?
First time using GIMP. Following the directions here: [URL] ......
Using, "Color to Alpha," I tried to select the background of my .jpg image. The background is white, the picture (logo) portion is silver. Because of the closeness in color, when I select white, the software selects the entire image to become alpha (transparent).
When I select the color of the picture, silver, I am able to select just the logo portion. How can I take the logo portion, which is now converted to transparent, and give it a black or transparent background, and then return the logo back to its former color silver. The logo is perfect, it is just that I recently switched my site from a white header to a black header and the image has a white background, so that does not look good.
I have some text icons on my phone size 48x48.. i am trying to get them chrome / metallic . Is there an easy way 9well easy for me way ) to do it . i have followed this
[URL]........ and all the other ones are the same but am stuck i just cant seem to do it .
I have this Image: [URL]......
I am trying to keep the same image, but change the green hues to blue hues. I am fairly positive I can recreate the bottom part of the image (the rectangle with rounded edges aka a button), but I don't know how to add the top parts after that. Ideally I would just like to be able to change the greens to blues.
I have this Image:
I am trying to change the green hues to blue hues. I can recreate the rectangle with the rounded corners with a blue gradient, but I don't know how to add the top parts to the image. Ideally I would just like to be able to manipulate the image I have and change the green hues to blue hues.
In Photoshop you can take a design, change the hue and make a total blue image a red one.
See the image below. This is an AI file. So what I want to do is just change it from any color I want like you can do in Photoshop. Is this possible?
I have a PSD file that has a logo in white against a black background. I know how to change the black background to another color but I do not know how to change the white logo to another color and maintain the existing fade effect. The outer edges of the white logo fade into the black background.
If I was to change the black background to a green background (#808A53) then I would like to know how to make the white logo fade into the then green background.
Ultimately I would like to make the white logo a red color (#7d110c) that fades into a green background (#808A53) but I do not know how to do this as I am a novice with Photoshop.
The PSD file I referred to is hosted here
[URL]........
I tried to change my cursor by simply greyscaling it, then saving it as ico, then changing the file extension of that to .cur, but once I change it to .cur and apply it. The cursor is offset by 32 pixels down, not at the top left, but at the bottom left. The png was exactly 32x32 and the original cur file that was taken from the png file works perfectly, but the greyscale cur file cursor is offset. Why is that and how can I fix it?
View 3 Replies View RelatedI am having trouble in changing the color of the bullets without changing the text color. Problem is I cannot select/highlight just the bullet so any new color selected applies to the whole line including bullet and text. I am using DP v 7.
View 8 Replies View RelatedI'm starting with a new file on ofnuts recommendation...see "Edit GIF image file"
I have duplicated a GIF file from a website, so I can make changes and replace it. The new file I will be exported to PNG, GIF, TIF, or JPG when complete. It's a horizontal rectangle; the leftward white 2/3 has text I will change, the rightward 1/3 is all green. I have an XCF file that I copied from the GIF as a working file, and the new file, created from scratch, which now contains my new text. The new graphics must fit into the webpage and line up exactly.
I had "selected" the green section and pasted into my new file, but it was not completely left justified, like the original, so I slid it over with my cursor, but apparenlty "dropped" it too high, because when I place the new JPG file in the webpage, there's a little white line at the bottom of that file, and it needs to butt up against the green right below it. ie, no white space.
Rather than dragging and dropping imprecisely with my mouse, is there a way to place the green area with some sort of calibration tool? Like "by the numbers" or snapping it into place?
Is there a way to "read" the green area in my working file, to see the precise size?
I want to change the size of the image in Gimp to 3957x4429 px (67x75 cm) at a 150dpi (the image we have has a 300 dpi.) When i do this in image - print size it keeps changing the width.
The system is not allowing me to get the picture a few cm larger. Is there any way I can overwrite this?
When I try to open a PSD file in GIMP, it breaks - the color is lost.
Here is what it should look like: [URL]....
This is how it appears in gimp: [URL].....
Here is the original, how to convert it to a format that actually works??? [URL].....
New to GIMP and would like to add some color to a line drawing. I have a line drawing that I scanned into the computer as a JPG. I've imported that JPG into GIMP.
the line drawing has a dozen or so areas created by the intersecting lines. I would like to fill the various areas with different colors. How can I do that?
If I pour a color paint on the picture without doing anything, the entire page changes to the color poured. Not what I want to do. I want area A to be red, area B to be blue, and area C to be yellow.
For a person’s signature, I used the paint brush tool to make small changes to a text font and then saved the image with a transparent background in .xcf file. How do I now change the color of this image from black to another color?
View 3 Replies View RelatedI want to section my assemblies to show some internal detail, but sometimes it is hard to tell what is part of the cut and what isn't.
Is it possible to colour the sectioned area red instead of having it look like a slice through a block on concrete?
By the way, this is in the model environment, not the drawing environment.
Windows 7 Pro (X64)
Intel(R) core (TM) i7-2600 CPU @ 3.40GHz
16.0 GB RAM
Nvidia Quadro 600
Autodesk Inventor 2013 Professional Ultimate Design Suite
I have made a circular crest type image with a uniquely defined stroke (so it looks like a stamp). I want only the outside of the stroke to be bump and the inside be smooth (of the circle). Before I was just layering other white circles over it but now I need the inside to be transparent. Is there a way I can convert my stroke into an object so I can easily erase the bumpy inside? How else can I get around this? Top image is what I have, bottom image is what I want. Only to have a transparent center.
View 5 Replies View RelatedAbout once a year I ask about a capability to output a file fromGimp in pdf format and the CMYK color model. In addition it would benice if this output was in the PDF X/1-a:2001 format, to satisfycertain fussy printers. I know there are external converters likeImageMagick. It would however be nice if after all these years Gimpcatered to the needs of the printing industry.
View 4 Replies View Related