Rocket.cdr
I have drawn a rocket and there's a white section in the flame that I'd prefer to be filled with Red. Orange and White don't make for a very convincing flame
How would I do this?
1588.practise3.pdf
I am practising filling objects with color. I have attached a file of a design drawn freehand, completely as a random shape. Why I am unable to fill the top left part of the design (above the dark blue) with any color?
So far as I can tell, there are no gaps. Also I have used arrange/join curves to close any gaps. Whatever I try, I cannot get any color in to that area of the design.
I need to export pages (ie set as default ie pg3 - pg8) as .eps file. we would like to have the page name included as a suffix of the file name i.e. customer_name_2XL.eps
file name is customer name & 2XL is page name.
New to GIMP and would like to add some color to a line drawing. I have a line drawing that I scanned into the computer as a JPG. I've imported that JPG into GIMP.
the line drawing has a dozen or so areas created by the intersecting lines. I would like to fill the various areas with different colors. How can I do that?
If I pour a color paint on the picture without doing anything, the entire page changes to the color poured. Not what I want to do. I want area A to be red, area B to be blue, and area C to be yellow.
We receive art files here to work on. They've gone to a couple of different sources before we get them, so we really don't know how the file was originally saved. It gets emailed to us so that we can get it ready to send to the plate makers.
After opening the file, I save it as a Corel Draw file, then work on it. The problem starts when converting the Corel file to an AI file. The AI file now shows sections of letters filled in, like the letter o.
We're using Corel X5 and using Windows 7.
The objective is to section a part, selecting a center of the hole (side view, not top view) to attach the section line.
In the hole's top view we can select the center hole to attach the section view, but in the side view, i can´t find any attach point, even if i have a center line.
I know we can edit the section line later and create some construction lines to center the section line with the hole, but i wonder, there's a better process, more automatic, to achieve this?
I have the following DDS file:
[URL]
I need to change that blue piece into dark green and the red into light green. Highlighting the section would be the obvious part, but when I paintbrush over it, it looks cartoonish. How can I keep it looking professional like that, whilst changing the color?
Retrieving attached file details of drawing file.
1. Attach DWG -- db.GetHostDwgXrefGraph(true);
2. Attach Image --
3. Attach DWF --
4. Arttach DGN --
5. Attach PDF --
I am working in Photoshop CS4...have been for years. All of a sudden, when I try to fill a closed path with a color, it fills the entire art board with color, except not inside the path. I have not selected "inverse" or anything....and it has never done this before....I can't figure out why it has started doing this, and I can't get it to stop. Most of the paths in my file, I have made in Illustrator and then pasted into Photoshop...they work normally....it is just the ones I actually draw in Photoshop that are doing this....one thing I have noticed is that in the paths palette, the paths I pasted in from Illustrator have a grey background.....while the paths I actually drew in Photoshop have a white background.
View 4 Replies View RelatedI was reading a certain tutorial for photoshop where it says to 'create a new layer and fill it with a certain color'. So how do I fill a layer with color!? Im perplexed!
View 4 Replies View RelatedI'm trying to fill my ellipses with a color - when I right click and choose fill, it doesn't fill it correctly - it merely does as the image below.
View 7 Replies View RelatedI'm a begiiner in Photoshop and I can't figure out how do you draw a circle without color filling. It should be possible, but I can't find it in settings.
View 4 Replies View RelatedI'm trying to change the color palette of a sprite's gif in GIMP, but I can't get the bucket tool to put the right color in to each layer.
Here's a screenshot of the gif opened up in GIMP with only the first frame visible.
Next, I selected one of the colors in the frame.
Then, I clicked on the new foreground color and set the blue and green sliders to 0.
Then, I selected the Select By Color tool, and selected the area with the old color.
Last, I used the Bucket Fill tool (making sure that FG color fill and Fill whole selection were chosen on the left) to add the new color, but I got a completely different color in its place.
Rather than fill a shape with a solid color, I want to be able to fill it with a gradient color. How might I do this?
View 4 Replies View RelatedI'm occasionally using CD X4 just for fun (so i'm not that experienced). My friend who has a digital printer, once printed one of my designs but there were stripes (like you have when there's little ink in a printer) only in gradient filled areas When i fill a shape with gradient colors, i also see these stripes on my screen (when i look very close) in CD and also in pdf when i export the file. What can i do?
View 7 Replies View RelatedI'd like to ask if it is possible to change colour of outline according to filling. I've traced the raster picture (outline tracing) and there is no outline and the picture seems to be disturbed by tiny white lines. So I'd add hair outline and I'd like to have the same colour of the outline as is the object. Is there any function what is able change it at once and all at the same time?
View 6 Replies View RelatedI am trying to follow this tutorial ...
[URL].........
Under #2 ... I am assuming the author means to draw with the Rounded Rectangle in Path mode ... am I assuming correct? I think it is suppose to be set to Path b/c it's the only way the Blend Mode reads "Pass Through"
this tuts steps aren't really numbered well but also under step two where the "BG" is filled with black the resulting shape is suppose to look like this :
But mine looks like this :
Notice how the left side has a lighter grey color and the one from the tut above is clear?
Also under step #2 ... where it comes to the part where I am to color the resulting shape with a yellow gradient this is what happens to me :
the entire canvas becomes colored ... ? Here are my Layers.
I select the "BG" layer to apply the gradient.
Here is the Layers panel from the tut which is confusing to me b/c the only difference I see is that the tuts panel has the down arrow and folder of the top layer/the "Body" layer seems to be greyed out... and the tut says something like : Activate the "BG" layer and cancel the mask view. Well, how to go about canceling the mask view and I looked all over Ps for such an "action" and also throughout the online manual.
I'm having trouble changing a black and white map to filling it with a color. In the materials palette the foreground and background remain in the greys/blacks and will not accept the change to a color.
View 1 Replies View RelatedI have a cartoon line drawing. The black outlines are anti aliased so the edges of the lines have different grades of gray pixels on them. When I use the fill tool, and adjust the fill with the opacity and tolerance sliders, (I think that's what they're called in GIMP), I still can't get what I want. Only some of the gray pixels are colored in. Others are canceled out. Completely covered by the color, erasing some of the line.
Or some pixels remain uncolored. Just gray instead of a combination of the gray AND the fill color. What I'm looking for is an effect that looks like I placed a colored gel shaped like the cartoon character over the drawing. All the different shades of gray pixels should still be seen. Even the ones that are lighter than the fill color. With a gel, those pixels would appear darker, even though they were lighter than the fill color without the gel over them. The darkness of the color PLUS the added darkness of even the lightest gray pixels should make all the pixels appear darker. And the line would appear complete. Not partially erased.
Is it at all possible to get this effect?
I have created the following:
However, I cannot fill the objects. I am guessing that they are not actually objects, and just lines on a page.
I am looking for the best way to carry this out. I have a drawing which I have scanned into my computer. The drawing is of one big shape made up of random, interlocking shapes - something like a jigsaw. Each of the shapes I want to be filled with different, single words.
I think cutting out each shape one at a time, filling with text then re piecing together may be the best option?
I should say that nothing of the original drawing needs to stay in the finished image, it's really just the shapes I am after so piecing them back together in a new document could be an option.
I am attaching text to a path, but on the bottom of the ellipse, the text is upside down in relation to the text at the top of the ellipse. I am going nuts to try and resolve this. I have CD6 The Official Guide at my side, and no luck.
View 6 Replies View RelatedI'm using Illustrator CC. When I draw an outline with either the pencil tool or the paintbrush tool, I can't fill it in with color, even though the path appears to be closed. The "fill" square has a red diagonal line through it and won't switch to a color.
View 11 Replies View RelatedThis question is more theoretical, as I have found a work around. On a layer, I have a gray color, which I sample, and it becomes the desired Foreground color.
I would like to Fill a Selection in an Alpha Channel with this gray color.
However, when I view the Alpha channel, my forground color is lost to black/white, which I understand, as the Alpha channel is a gray scale image.
But, I am able to sample a gray Swatch to make a Foreground color, but how can I preserve my chosen Foreground gray selected from a Layer? The only way that I know would be to make a new Swatch, and then use that when I am in Channels.
How to take the Castellar MT font and fill in the blank spaces in the letters with colour? I need to use this font because that's my company's font for their name and I'm trying to design a sign. I have used the blob brush, but I keep getting tiny little specks that look like they're not filled in.
View 2 Replies View RelatedI am tracing a line drawing and I want to close open paths and fill them. "fill open curves" "combine" and more does not enable me to fill.
View 1 Replies View RelatedI have tried downloading and installing the Inventor LT trial twice now but for some reason I keep getting errors and it won't run. convert the attached .dwg files to both .stp and .igs file format?
View 9 Replies View RelatedI added a patten fill to my libray, saved my default setting so it would stay, now everytime I draw an object it is automatically filled with that pattern fill...I even deleted the pattern fill from the library, saved default settings again, restarted corel, and it still fills an object.
View 4 Replies View Relatedbg color of combined shape.jpg
I am creating some geometric patters with the transform tool. Basically a shape is rotated about a center point. When the shapes are combined they create some quick interesting shapes. However, is there a way to fill in the gaps in the combined shape automatically, without having to manually use the smart fill tool?
Breaking the shape apart does not work, because the geometric pattern is based on the overlaps. I included a jpg of what I am doing to circumvent the manual smart fill, but is there an easier way, especially where the geometric patterns become very complex.
I can take the object, trim from a background, break apart that trimmed shape, then color it, or group or shape into a single curve, then align and group with the original object. But just looking to see if there is another easier way.
FIRST, when adding names, places, or events to photos, in Adobe Photoshop Organizer 8, are those tags only saved in the catalog or are they actually appended to and saved with the file? In other words, if those files are copied or moved to another computer, do they retain the information?
Second, is adding and editing tags for a JPEG type file a lossless operation, or does it deteriorate the photo quality?
I have a form I have to fill out every day several times according to the client, but this information comes from a spreadsheet.
View 8 Replies View Related